Sentinel Current Data Loggers
The AEMC Sentinel Current Data Logger is a battery powered three-channel current recording device designed for recording AC Current through integral flexible current probes for each input.
 The
Sentinel Current Loggers record AC current. The Loggers provide
true RMS current measurements in a low-cost, self-contained and portable
environment. The included software, DataView is
easy to use and configure. Packed with lots of features, including 64
samples per cycle, 1 MB of storage (480,000 measurements) and a programmable
data storage rate, makes this logger ideal for load and HVAC monitoring,
energy management and preventative maintenance.
Included with each Sentinel Logger:
>> DataView Software
>> USB Cable
>> 120 Volt US Wall Charger (Included with SDL-A303, SDL-A304, SDL-A401 and SDL-A402 Versions
Only!)
Current Range and Power Source Versions available. View
Specifications for details.
Features Specifications Documentation
| Description |
Part Number |
Qty 1-9 |
Qty 10+ |
|
| AEMC Sentinel Current Logger, 3-Channel, 1000A/AC |
SDL-A301
|
$1,095.00 |
call |
 |
| AEMC Sentinel Current Logger, 3-Channel, 3000A/AC |
SDL-A302
|
$1,295.00 |
call |
|
| AEMC Sentinel Current Logger, 3-Channel, 1000A/AC, Rechargeable NiMH Batteries |
SDL-A303
|
$1,245.00 |
call |
|
| AEMC Sentinel Current Logger, 3-Channel, 3000A/AC, Rechargeable NiMH Batteries |
SDL-A304
|
$1,445.00 |
call |
|
| AEMC Sentinel 4-Channel Current Data Logger, 3000A/AC, BNC Connector |
SDL-A401
|
$945.00 |
call |
|
| AEMC Sentinel 4-Channel Current Data Logger, Sensor Dependent Range, BNC Connector |
SDL-A402
|
$945.00 |
call |
|
Sentinel Current Logger Features
- True RMS Current Measurements
- Low-cost, self contained, portable data logger
- Integral 24" Flexible Current Probes for three-phases
- Stores up to 480,000 point (1MB)
- 64 samples per cycle
- Includes DataView® Software for Data Storage, Real-Time
Display, Analysis and Report Generation
- Optically isolated USB 2.0 Communication
- 600V Cat. lll, 300V Cat IV
Sentinel Current Logger Specifications
| Number of Channels |
SDL-A301: 3
SDL-A302: 3
SDL-A303: 3
SDL-A304: 3
SDL-A401: 4
SDL-A402: 4 |
| Input Termination |
SDL-A301: Hard-Wired Flexible CTs
SDL-A302: Hard-Wired Flexible CTs
SDL-A303: Hard-Wired Flexible CTs
SDL-A304: Hard-Wired Flexible CTs
SDL-A401: BNC
SDL-A402: BNC |
| Current Range |
SDL-A301: 5 to 1000A
SDL-A302: 15 to 3000A
SDL-A303: 5 to 1000A
SDL-A304: 15 to 3000A
SDL-A401: 5-1000A or 15-3000A, Sensor Dependant
SDL-A402: Sensor Dependant |
| Resolution |
SDL-A301: 0.1A
SDL-A302: 0.25A
SDL-A303: 0.1A
SDL-A304: 0.25A
SDL-A401: 0.25A
SDL-A402: Sensor Dependant |
| Accuracy |
SDL-A301: ±(1% of Reading + 1.5A)
SDL-A302: ±(1% of Reading + 1.5A)
SDL-A303: ±(1% of Reading + 1.5A)
SDL-A304: ±(1% of Reading + 1.5A)
SDL-A401: ±(1% of Reading + 1.5A)
SDL-A402: Sensor Dependant |
| Sample Rate |
64 Samples/cycle |
| Storage Rate |
Programmable from 250ms to 12 Hours |
| Recording Method |
Stop when full, FIFO and Extended Recording Mode (XRM) |
| Data Storage Capacity |
480,000 Measurements/Samples |
| Communications |
USB 2.0 Optically Isolated to 5500Vrms |
| Controls |
One Button to turn Logger On/Off and Start/Stop Recording |
| Indicators |
Red, Yellow and Green status indicators |
| Power Source |
SDL-A301: (4) 1.5V C Alkaline Batteries
SDL-A302: (4) 1.5V C Alkaline Batteries
SDL-A303: AC Power/ Rechargeable NiMH Batteries
SDL-A304: AC Power/ Rechargeable NiMH Batteries
SDL-A401: AC Power/ Rechargeable NiMH Batteries
SDL-A402: AC Power/ Rechargeable NiMH Batteries |
| Battery Life* |
SDL-A301: 100 Hours to 45 Days
SDL-A302: 100 Hours to 45 Days
SDL-A303: Power Ride through 10 Hours
SDL-A304: Power Ride through 10 Hours
SDL-A401: Power Ride through 10 Hours
SDL-A402: Power Ride through 10 Hours |
| Protection Index |
IP50 |
| Operating Conditions |
Temperature: 14°F to 122°F (-10°C to 50°C)
Humidity: 0 to 85% RH |
| Storage Conditions |
Temperature: -4°F to 140°F (-20°C to 60°C)
Humidity: 0 to 85% RH |
| Safety Rating |
600V Cat. III, 300V Cat. IV |
| Double Insulation |
Yes |
| Case Material |
Polycarbonate UL94 V-2 |
| Dimensions |
6.73" x 4.76" x 2.17" (171mm x 121mm x 55mm) |
| Weight |
3.2 lbs (1.4 kg) |
* Extended Recording Mode (XRM™)
This unique recording mode provides the opportunity to continuously record over long periods of time by reducing
the stored sample resolution of the oldest data and maintaining matching resolution for the newest data. Each time the
memory fills up using XRM™ every other of the oldest stored samples is discarded making room for newer samples.
This process continues until the recording is manually stopped.
Sentinel Current Data Logger Specifications
MicroDAQ.com accepts
Visa, MasterCard and American Express
All prices are in U.S. Dollars.
No U.S. sales tax
|
