Sentinel Voltage Data Loggers
The AEMC Sentinel Voltage Data Logger is a battery powered three-channel
voltage recording device designed to record voltages up to 600VAC or
850VDC
 The
Sentinel Voltage Loggers record AC and DC voltages. The Loggers provide
true RMS voltage measurements in a low-cost, self-contained and portable
environment. The included software, DataView is
easy to use and configure. Packed with lots of features, including 64
samples per cycle, 1 MB of storage (480,000 measurements) and a programmable
data storage rate, makes this logger ideal for phase unbalance monitoring,
surge and sag recording, line surveys and battery bank monitoring.
Included with each Sentinel Logger:
1. DataView Software
2. USB Cable
3. Leads and Alligator Clips
4. 120 Volt US Wall Charger (Included with 4 Channel SDL401 Voltage Logger Only!)
3 or 4 Channel Versions available. View Specifications for
details.
Features Specifications Documentation
| Description |
Part Number |
Qty 1-9 |
Qty 10+ |
|
| AEMC Sentinel Voltage Logger, 3-Channel, 600VAC |
SDL-V301
|
$695.00 |
call |
 |
| AEMC Sentinel Voltage Logger, 4-Channel, Rechargeable NiMH batteries |
SDL-V401
|
$945.00 |
call |
|
Sentinel Voltage Logger Features
- True RMS measurements
- Low-cost, self contained, portable data logger
- Differential three-phase inputs
- Stores up to 480,000 measurements (1MB)
- 64 samples per cycle
- Includes DataView® Software for Data Storage, Real-Time
Display, Analysis and Report Generation
- Optically isolated USB 2.0 Communication
- 600V Cat. lll, 300V Cat IV
Sentinel Voltage Logger Specifications
| Number of Channels |
SDL-V301: 3
SDL-V401: 4 |
| Input Termination |
Recessed Banana Jacks |
| Voltage Range |
0 to 600 Volt AC or 0 to 850 Volt DC |
| Resolution |
0.1 Volt |
| Accuracy |
5 to 85V: ±(1.0% of reading ±0.6V)
85 to 600VAC/850VDC: ±(0.25% of reading ±0.6V) |
| Sample Rate |
64 Samples/cycle |
| Storage Rate |
Programmable from 250ms to 12 Hours |
| Storage Technique |
Stop when full, FIFO and Extended Recording Mode (XRM) |
| Memory Capacity |
480,000 Measurements (1MB) |
| Communications |
USB 2.0 Optically Isolated |
| Controls |
One Button to turn Logger On/Off and Start/Stop Recording |
| Indicators |
Red, Yellow and Green status indicators |
| Power Source |
SDL V301: 4 1.5 V C Alkaline Batteries
SDL V401: AC Power/ Rechargable NiMH Batteries |
| Battery Life* |
SDL V301: 100 Hours to 90 Days
SDL V401: Power Ride through 10 Hours |
| Protection Index |
IP50 |
| Case Material |
Polycarbonate UL94 V-2 |
| Dimensions |
6.73" x 4.76" x 2.17" (171mm x 121mm x 55mm) |
| Operating Temperature |
14°F to 122°F (-10°C to 50°C) |
| Storage Temperature |
-4°F to 140°F (-20°C to 60°C) |
| Relative Humidity |
0 to 85% RH |
| Safety Rating |
600V Cat. III, 300V Cat. IV |
| Double Insulation |
Yes |
* Extended Recording Mode (XRM™)
This unique recording mode provides the opportunity to continuously record over long periods of time by reducing
the stored sample resolution of the oldest data and maintaining matching resolution for the newest data. Each time the
memory fills up using XRM™ every other of the oldest stored samples is discarded making room for newer samples.
This process continues until the recording is manually stopped.
Sentinel Voltage Data Logger Specifications
MicroDAQ.com accepts
Visa, MasterCard and American Express
All prices are in U.S. Dollars.
No U.S. sales tax
|
