Rain Collector II with Contact Closure
The Rain Collector is designed to meet the guidellines of the World Meteorological Organization. Rain enters the collector cone, passes through a debris-filtering screen and collects in one chamber of the tipping bucket. HTe bucket tips when it has collected an amount of water equal to the increment in which the collector measures (0.01" or 0.2mm). As the bucket tips, it causes a switch closure and brings the second tipping bucket chamber into position. The rain water drains out through the screened drains in the base of the collector.
Pricing and Ordering Information
|
 |
Wireless Anemometer Transmitter Kit
Solar-powered kit for use with wireless Vantage Pro2 or Vantage Pro2
Plus. Allows you to locate the anemometer independently from the rain collector,
up to 1000' (300 m) away from the console/receiver. For longer
distances, add one or more wireless repeaters. Kit includes transmitter
inside weather-resistant shelter, solar panel, battery, and mounting hardware.
Pricing and Ordering Information
|
 |
Wireless Repeaters
For longer distances or to improve reception in troublesome areas, add
one or more wireless repeaters. Range is up to 1000' (300 m) outdoors, line
of sight. Typical range through walls under most conditions is 200' to 400'
(60 to 120 m). Use up to eight repeaters with a single wireless station,
or form a network of weather stations by linking eight repeaters to eight
different wireless stations. AC-powered model includes power adapter. Solar-powered
model includes solar panel, regulator circuit, and rechargeable battery.
Pricing and Ordering Information
|
 |
Mounting Pole Kit
Optional Mounting Pole Kit includes two galvanized steel poles, connector, and mounting hardware. Poles measure 19½" (0.50 m) and 21" (0.53 m) long. Assemble the two together to make a single 37½" (0.95 m) long pole. Outside diameter is 15/16" (33 mm).
Pricing and Ordering Information
|
 |
Rain Collector Heater
Use in cold climates to measure freezing rain or the moisture content of snowfall. Includes 24-watt, 24-volt heater with thermal cut-off switch, control unit, insulating reflective blanket, and AC-power adapter and 50' (15 m) cable.
Not for use with Solar Power Kit.
Available in US (United States) version only.
Pricing and Ordering Information
|
 |
Mounting Tripod
Optional tripod makes installation even easier. Brackets at the base of legs tilt to mount on roof or uneven terrain. Made of galvanized steel. Includes two 36 3/8" (0.92 m)-long poles, which may be used separately or together to make a single 69 3/4" (1.77 m)-long pole.
Pricing and Ordering Information
|
|
Complete System Shelter
To locate your station console and other components outside, at a
field or remote location. Weather-resistant NEMA 4X enclosure
provides protection from the elements for a Vantage Pro2
console or console/receiver with WeatherLink data logger.
Measures 15 1/2 × 7 3/4 × 13 1/2" (395 × 195 × 345
mm).
Pricing and Ordering Information
|
|
Multi-Purpose Shelter
The Multi-Purpose Shelter gives you a number of different outdoor installation options. Use it to shelter either of the following sub-systems: Console (except Vantage Pro2 or original Vantage Pro console) with junction box (or Protected Junction Box or sensor interface module) and link isolator or Short-Range Modem; Spread spectrum or UHF radio modem with timer; or Alarm Output Module with sensor interface module or Interface Cable Adapter Module.
Includes 16' (5 m) ground wire. Dimensions: 3.75" x 9.5" x 12.5" (95 x 240 x 320 mm).
Pricing and Ordering Information
|
|
Solar Power Kit
Powers both the console (or Weather Envoy) and the outdooor sensors. Includes solar panel, regulator circuit, rechargeable battery, and 20' (6 m) cable.
Pricing and Ordering Information
|
|
Radiation Shield
The most effective passive shelter available. Protects your Temperature or Temperature/Humidity Sensor from solar radiation and other sources of radiated and reflected heat. Multi-plate construction for maximum airflow. Asssembly required. May be used with Sensor Mounting Arm or mounted on metal pipe or wood surface.
Pricing and Ordering Information
|
|
All prices are in U.S. Dollars.
No U.S. sales tax
