5 MHz Dual Channel Datalogging MultiScope
Extech Dual Channel Oscilloscope, Multimeter and Data Logger
 The dual channel datalogging multiscope measures AC/DC voltage, resistance, continuity, frequency, rpm and pulse width. The MultiScope stores up to 17,000 data samples with 25MS/s dual channel sampling time (50MS/s single channel). The datalogging multiscope features an easy to use menu driven operation, internal or external triggering, window freeze locks waveform in the display, roll mode for slow repetition waveforms, data hold and low battery indicator.
Included with each Datalogging Multiscope
>> (4) Test Leads with Alligator Clips
>> Protective Holster
>> Ni-MH Battery Pack
>> Univeral AC Adapter and Charger
>> Cable
>> Windows PC Software
>> Carrying Case
The Extech Dual Channel Multiscope Datalogger Has Been Discontinued by the Manufacturer. Call 1-877-275-9606 for Further Information.
Features Specifications Documentations
Datalogging Multiscope Features
- Menu Driven Operation with Internal or External Triggering
- Auto or manual Setup for Horizontal and Vertical Scaling
- Store and Recall up to 16 Waveforms and Setups
- 132 x 128 Pixel Super-Twist Two Level Backlit Display
- Window Freeze Locks Waveform in the Display
- Includes Software, Cable, Test Leads, Alligator Clips and Carrying Case
Datalogging MultiScope Specifications
| Oscilloscope |
| Bandwidth |
5 MHz |
| Sample Rate Per Channel |
Dual Channel: 25 MS/s
Single Channel: 50 MS/s |
| Record Length |
512 Single Shot; 256 All Other Modes |
| Sample Mode |
Single Shot, Roll, Normal |
| Vertical Sensitivity |
50 mV Maximum |
| Input Voltage |
600 Volts DC or AC rms Maximum |
| Trigger Modes |
Auto, Normal, Single |
| Trigger Source |
Channel A, Channel B, External |
| Trigger Coupling |
AC, DC |
| Timebase |
1µSeconds to 5 Seconds |
| Input Impedance |
1MΩ |
| Data Logger |
| Data Storage Capacity |
17,000 Measurement Readings |
| Sampling Rate |
0.25 Samples/Second to 60 Samples/Second |
| Sampling Mode |
Peak, Sampling Time |
| Clock |
Real Time Clock |
| Multimeter |
| DC Voltage |
0.1mV to 1000 Volts (0.3% Basic Accuracy) |
| AC Voltage (TRMS) |
0.1m to 750 Volts (50-20kHz Bandwidth) |
| Resistance |
0.001kΩ to 5MΩ |
| Continuity |
Test Voltage 1.7 Volts; Threshold 10 Digits |
| Frequency |
0.01 Hz to 10 MHz |
| RPM |
240 to 60,000 |
| Pulse Width |
2µs to 500 ms |
| Duty Cycle |
25% to 75% |
| Standards Compliance |
CE |
| Dimensions |
7.7" x 3.5" x 1.6" (195mm x 90mm x 40mm) |
| Weight |
1.6 lbs (730 grams) |
5 MHz Dual Channel Multiscope Logger Data Sheet
MicroDAQ.com accepts
Visa, MasterCard and American Express
All prices are in U.S. Dollars.
No U.S. sales tax
|
