Squirrel 2010 Universal Input Data Logger
Grant Instruments Logger with 4 to 8 Analogue Inputs and 8 Trigger Channels
>> Measures Current, Voltage, Resistance and Temperature
>> 4 Differential or 8 Single Ended Channels with 8 Digital Channels to Trigger or Stop Logging
>> Programmed Using LCD Display and 4 Integral Buttons or Software
>> 2 Alarm Outputs and 2 Pulse Counter Inputs (64kHz and 100Hz)
>> 0.1% Accuracy (Range + 0.1% of Reading)
>> Stores up to 1.8 Million Readings
>> RS232 Port for Modem and Wireless Connection via Interface Units (Sold Separately)
>> External Input Sensors Sold Separately
>> Includes Case, Starter Guide, USB Cable, Certificate of Conformance, Connection Plugs with Cable Ties, Resistors, Battery and SquirrelView Software for Setup and Data Download
SQ2010 Kit Includes
>> Hard Case with Lined Fitted Foam
>> SquirrelView Plus Software
>> Getting Started Guide with Certificate of Conformity
>> Universal Adapter and USB Cable
>> Set of Connection Plugs Complete with Cable Ties
>> (4) Precision Resistors for 4-20mA Connection
>> (2) C Type Alkaline Batteries
>> Small Electrical Screw Driver
- Specifications
- Documentation
- Application Notes
- Purchase
Squirrel 2010 Specifications
| Data Channels |
8 Single-Ended Analog Channels
or
4 Differential Analog Channels |
| Channel Expansion |
No |
| Universal Input |
Yes |
| Voltage Ranges |
-6 to 25, -0.6 to 2.4, ±0.3 Volts, -0.15 to 0.15, -0.075 to 0.075, -6 to 12, -6 to 6, -3 to 3, -0.6 to 1.2, -0.6 to 0.6
(Differential and Single Ended) |
| Common Mode |
25 Volts |
| Current Range |
Differential: 4 to 20mA, ±30mA
(Requires External 10R Shunt) |
| Thermocouple Range |
J-Type: -200°C to 1200°C
K-Type: -200°C to 1372°C
N-Type: -200°C to 1300°C
R-Type: -50°C to 1768°C
S-Type: -50°C to 1768°C
T-Type: -200°C to 400°C
(Differential and Single Ended) |
Resistance Range
(All 2 Wire) |
0 to 1,250 R, 0 to 5,000 R
(0 to 300,000R , 0 to 20,000 R |
| Thermistor Range |
U & UU-Type: -50°C to 150°C
Y-Type: -50°C to 150°C
S-Type: -30°C to 150°C |
Pt100/1000 Range
(2-Wire) |
-200°C to 850°C |
| Internal Reference Temperature |
-50°C to 150°C |
| Pulse Count Range |
0 to 100Hz (1 Input)
0 to 64kHz (1 Input)
0 to 16,000,000 Count |
| Digital State/Event Ranges |
8 State Inputs or 1 x 8 Bit Binary |
| Digital/Alarm Outputs |
2 Open Drain FETs, 18 Volts, 0.1 Amp |
| A/D Resolution |
24 Bit |
| Accuracy |
0.1% of Range + 0.1% of Reading |
| Clock Resolution |
1s/10ppm Normal Mode - Each Input Sampled at a maximum rate of 1 reading per second. Double-speed (mains reject off) - one input can be sampled at 10 readings per second and all others are sampled at a maximum rate of 1 reading per second. |
| Number of Intervals |
4 |
| Data Scaling |
Yes |
| Data Statistics |
Yes from within SquirelView Plus PC Software |
| Calculated Channels |
Yes up to 16 |
| Data Storage Capacity |
1.8 Million Measurements/Readings |
| Display/Keypad |
128*64 Dot Graphical Display, 4 Button Keypad |
| Power Source |
User-Replaceable (2) C Alkaline Battery |
| Battery Life |
5 Days (Continuous Usage Sampling All Channels 1/Second) |
| External Power |
8 to 28 Volts DC & USB When Plugged In |
| Sensor Power Output |
5 Volts at 50mA, External 8 to 28 Volts at 100 mA
(When Sensor is Connected) |
| Networking |
via RS-232 to Ethernet Adaptor (Part #SQ20A801) |
| Modem Support |
Via RS232 Modem (GSM Modem Part # SQ20A802) |
| Actions & Triggers |
AS SQ2020/40 Although 2 Alarm Outputs |
| PC Setup |
Yes, SquirrelView Compatible |
| Front Panel Setup |
Via 4 Integral Keys. All Essential Functionality Available via Key Pad (Channel Configuration, Start/Stop Logging , etc.) Other Advanced Functions (Calculated Channels and Channel Descriptions) are Available Via Connection to a PC Running SquirrelView |
| Stored Setups |
6 |
| Third Party Programming |
Dependant on 20XX Driver Suite |
| Operating Range |
Temperature: -20°C to 65°C |
| Standards Compliance |
CE |
| Weight |
0.7 kilograms |
| Dimensions |
17.5 cm x 13.5 cm x 0.55 cm (175mm x 135mm x 55mm) |
 |
Squirrel 2010 Data Logger Kit
>> 4 Differential or 8 Single-Ended Analog Inputs
>> LCD Display, Alarms and RS232 Port
>> Includes Case, Batteries, Unversal Adaptor and USB Cable, Connection Plugs, Resistors, Getting Started Guide w/ Certificate of Conformance, SquirrelView Plus Software, User Manual and Small Electrical Screw Driver
|
Price: $1,675.00
Part #: SQ2010KIT
|
|
|
Squirrel 2010 Data Logger
>> Open Box: 1 Available
>> 4 Differential or 8 Single-Ended Analog Inputs
>> LCD Display, Alarms and RS232 Port
>> Includes Case, Batteries, USB Cable, Certificate of Conformance, Software and User Manual
|
Price: $1,475.00 $884.00
Part #: SQ2010--U--
|
|
|
Squirrel 2010 Data Logger
>> 4 Differential or 8 Single-Ended Analog Inputs
>> LCD Display, Alarms and RS232 Port
>> Includes Case, Batteries, USB Cable, Certificate of Conformance, Software and User Manual
|
Price: $1,475.00
Part #: SQ2010
|
 |
Standard NIST 4-20mA Calibration Service
>> 1 Point Offset Calibration
>> Traceable to NIST
>> Certificate Supplied
>> Note: 3 to 5 Day Lead Time for All Calibration Orders
|
Price: $10.00
Part #: CAL-NIST-420MA
|
Accessories
 |
Grant Serial Ethernet Converter
>> Netport RS-232 Ethernet Converter
>> Converts RS232 Output to Ethernet
>> Allows the Logger to Connect to Ethernet Network
>> Requires Ethernet Network Connection
|
Price: $370.00
Part #: SQ20A801
|
 |
Grant Modem Adapter
>> Remote Connection to Logger Using GSM Cellular Network
>> Operates on Dual Band Versions (900 MHz and 1800 MHz)
|
Price: $610.00
Part #: SQ20A802
|
MicroDAQ.com accepts
Visa, MasterCard and American Express
All prices are in U.S. Dollars.
No U.S. sales tax
|
