GL200 Midi Data Logger
GL200 Midi Data Logger
 The GL200 midi data logger accepts voltage, temperature, humidity, pulse and logic signals. The sensors are connected via rear mounted screw terminals. With its channel-to-channel isolation, wiring errors or overloaded channels will not affect neighbouring channels. Its built-in 3.5MB non-volatile memory retains data even if the power supply is interrupted. The included software provides real-time waveform monitoring, data upload and data export to spreadsheets.
Included With Each Midi Logger
1. OPS022 Software
2. 100 to 240 Volt (50/60 Hz) AC Adapter
Optional Accessories Available
1. 6 Hour Battery Pack (#B-517)
2. DC Power Cable (#B-514)
3. USB 1.1 Memory Stick for additional 1GB of data storage
Features Specifications Documentation
NOTE: Large Quantity Discounts available!
| Description |
Part Number |
Qty 1-9 |
Qty 10+ |
|
| GL200 Midi Logger |
GL200
|
$995.00 |
call |
 |
| Optional Accessories |
| Graphtec battery pack |
B-517
|
$120.00 |
call |
|
| DC Power cable, 2 meters, bare ends, for direct connection to DC power source |
B-514
|
$50.00 |
call |
|
| Graphtec Humidity Sensor |
B-530
|
$400.00 |
call |
|
| Yellow Xtreme Protective Case (11.93" x 9.02" x 4.02") |
T6000.2
|
$63.00 |
call |
|
| Black Xtreme Protective Case (11.93" x 9.02" x 4.02") |
T6000.3
|
$63.00 |
call |
|
| Cole Parmer 12" Length Cable Adapter, Type K |
93786-02
|
$15.00 |
call |
|
Midi Logger Features
- Accepts Voltage (20mv to 50V), Thermocouple (K,E,J,T,N,R,S,T,B,W) and Humidity inputs
- 16-bit ADC Resolution
- 3.5" Color LCD Display (320 x 240 pixels)
- Waveform and text display modes
- Easy-to-use keypad menu system
- Single open-collector alarm output
- Range of trigger functions
- Real-time Statistical Calculation
- Built-in 3.5M Memory
- 2 x USB 2.0 interfaces - one for USB Memory stick and one for PC connection
- Optional battery (#B517) for 6 hour operation
- Maximum Sampling Rate of 0.1s/sec for each Channel
- 1 Pulse Input and 1 Trigger Input Available
- Small Size: 194mm x 122mm x 41mm
- Supplied with mains PSU (AC Adapter)
- Includes Windows software for setup, control, data transfer, data conversion to ASCII and Excel formats, and on-screen data review with cursors
GL200 Logger Specifications
| Number of Channels |
10 |
| Input Method |
Photo MOS Relay Scanning System; All Channels Isolated |
| Measurement Ranges |
Voltage: 20, 50, 100 and 500mV;
1,2,5,10,20,50V; 1 to 5 v FS
Temperature: Thermocouples Type K,J,E,T,R,S,B,N,W
Humidity: 0-100% (Voltage 0V to 1V Scaling Conversion) |
| Scan Speed |
0.1 Seconds/10 Channel Maximum |
| Trigger Functions |
Repeat Trigger: Off, On
Trigger Types: Start/Stop: Data Capture Starts/Stops When a trigger is generated
Trigger Conditions: Off, Level, External Digital, Date/Time
Alarm Judgement: Analog H,L,Windows In, Windows Out, Logic H,L,Pulse H,L |
| Alarm Output |
Output Format: Open Collector Output (100k pull-up resistance)
Output Conditions: Level, Window, Logic Pattern, Pulse |
| Pulse/Logic Input |
1 Pulse Input 1 Channel, Logic Input 1 Channel |
| Pulse Input |
Revs Mode: Spans 50, 500, 5000, 50K, 500K, 5M, 50M, 500M RPM
Counts Mode: Spans 50, 500, 5000, 50K, 500K, 5M, 50M, 500M Counts/sec
Inst. Mode: Spans 50, 500, 5000, 50K, 500K, 5M, 50M, 500M Counts/sec
Max Number Mode: Counts, Inst Modes: 50/k Sampling interval. Revs 50k/s |
| Internal Memory Capacity |
3.5 MB |
| External Memory Device |
USB Memory Stick |
| PC Interface |
USB 2.0 |
| Display |
Size: 3.5" STN Colour LCD (320 x 240 pixels)
Displayed Items: Waveforms + Digital Values, Waveforms Only, Digital Values Only, Digital Values + Calculated Values
Functions: Waveform Expansion/Compression, Scaling, Calculatons, Search |
| A/D Converter |
16-bit |
| Input Impedance |
1M Ohms ±5% |
| Withstand Voltage |
Between Input Terminals and Chassis 1 Minute at 350V p-p |
| Maximum Input Voltage |
Between ±Terminals and Input Terminals and Casing 60V p-p |
| Operating Environment |
Temperature: 0 to 40°C
Humidity: 30 to 80% RH (Non-condensing) |
| Power Supply |
100 to 240 VAC, 50/60 Hz AC Adapter (Included)
DC Input (8.5 to 24VDC), Battery Pack (Optional) |
| Dimensions |
194mm x 122mm x 41mm |
| Weight |
480g |
GL200 User Manual
MicroDAQ.com accepts
Visa, MasterCard and American Express
All prices are in U.S. Dollars.
No U.S. sales tax
|
