GL800 Midi Data Logger
Graphtec GL800 Midi Data Logger
 The GL800 midi data logger accepts voltage, temperature, humidity, pulse and logic signals. The sensors are connected via rear mounted screw terminals. With its channel-to-channel isolation, wiring errors or overloaded channels will not affect neighbouring channels, due to its channel-to-channel isolation. Its built-in 12.0MB non-volatile memory retains data even if the power supply is interrupted. The included software provides real-time waveform monitoring, data upload and data export to spreadsheets.
Included With Each Midi Logger
>> User Manual
>> Software
Optional Accessories Available
>> Humidity Sensor (#B-530)
>> 6 Hour Battery Pack (#B-517)
>> DC Power Cable (#B-514)
Features Specifications User Manual & Application Notes
NOTE: Large Quantity Discounts available!
| Description |
Part Number |
Qty 1-9 |
Qty 10+ |
|
| GL800 Midi Data Logger |
GL800
|
$1,995.00 |
call |
 |
| Optional RTD Sensors |
| Tip Sensitive RTD ± 0.5% at 0°C |
RTD-IND-S54PA
|
$69.00 |
$65.00 |
|
| Tip Sensitive RTD ± 0.1% at 0°C (Limited Quantity - 2 Available) |
RTD-IND-S854PD--U--
|
$85.00
$68.00 |
call |
|
| Tip Sensitive RTD ± 0.1% at 0°C |
RTD-IND-S854PD
|
$85.00 |
$79.00 |
|
| Optional Accessories |
| Extension Terminal Base Set |
B-537
|
$300.00 |
call |
|
| 20-Channel Extension Terminal Set |
B-538
|
$600.00 |
call |
|
| Graphtec Battery Pack |
B-517
|
$120.00 |
call |
|
| DC Power cable, 2 meters, bare ends, for direct connection to DC power source |
B-514
|
$50.00 |
call |
|
| Cable: 4x logic inputs, 4x alarm outputs, 2 meters |
B-513
|
$80.00 |
call |
|
| Graphtec Humidity Sensor |
B-530
|
$400.00 |
call |
|
| Yellow Xtreme Protective Case (11.93" x 9.02" x 4.02") |
T6000.2
|
$63.00 |
call |
|
| Black Xtreme Protective Case (11.93" x 9.02" x 4.02") |
T6000.3
|
$63.00 |
call |
|
| Cole Parmer 12" Length Cable Adapter, Type K |
93786-02
|
$15.00 |
call |
|
Midi Logger Features
- Accepts Voltage (20mv to 50V FS), Thermocouples, RTDs, 4-20mA and Humidity inputs
- Expandable to 200 Channels
- 5.7" Color TFT LCD Display
- Ethernet and USB 2.0 Computer Interfaces
- Network Ready
- USB Flash Memory Slot for Data Archival
- Includes Windows software for setup, control, data transfer, data conversion to ASCII and Excel formats, and on-screen data review with cursors
GL800 Logger Specifications
| Number of Channels |
20 Channels (Expandable to 200) |
| Input Method |
Scanning |
| Input Types |
Voltage, Current, Thermocouple, RTD, Humidity |
| Voltage Input Ranges |
±20mV to ±50 V, ±1 to 5V (4 to 20 mA) |
| Voltage Measurement Ranges |
20mV,50mV,100mV,200mV,500mV, 1V,2V,5V,10V,20V,50V, 1-5 Volts FS |
| Thermocouple Input Types |
K, J, E, T, R, S, B, N, W |
| RTD Input Types |
PT100 and JPT100 |
| Internal Memory Capacity |
12.0 MB |
| Sampling Interval |
100 ms to 1 Hour |
| Alarm Function |
Analog, Logic or Pulse |
| Operating Environment |
Temperature: 0 to 45°C
Humidity: 5 to 85% RH |
| Certifications |
CE, RoHS, China RoHS |
| Software Compatibility |
Windows 2000/XP |
| Power Supply |
100 to 240 VAC, 50/60 Hz AC Adapter (Included)
DC Input (8.5 to 24VDC), Battery Pack (Optional) |
| Dimensions |
232mm x 152mm x 50mm |
| Weight |
990g (Battery and AC Adapter excluded) |
Humidity Sensor Specifications (#B-530)
| Measurement Range |
Temperature: -25 to 80C
Humidity: 0-100% RH |
| RH Accuracy |
3%RH (5 to 98%RH at 25C) |
| Response Time |
15 seconds (90% Rtesponse When Membrane Filter Installed) |
| Output |
0 to 1 Volt DC |
| Power Source |
5 to 16 Volts DC |
| Power Consumption |
Approx. 4 mA |
| Dimensions |
14mm x 80mm |
| Cable Length |
3 Meters |
Battery Pack Specifications (#B-517)
| Capacity |
7.2 Volts/2200 mAh |
| Battery Type |
Lithium Scondary Battery |
| Running Time |
Up to 2 Packs can be Mounted
When LCD is On:
Battery Pack x 1 (Brightness MAX): Approx. 2.5 Hours
Battery Pack x 1 (Brightness MIN): Approx. 3.0 Hours
Battery Pack x 2 (Brightness MAX): Approx. 5.0 Hours
Battery Pack x 2 (Brightness MIN): Approx. 6.0 Hours
When LCD is Off:
Battery Pack x 1: Approx. 4.5 Hours
Battery Pack x 2: Approx. 9.0 Hours
Note: When Capturing to Internal Memory at 1 s, sampling, 20 channel terminals, using new battery packs at 25C Environment.
Note: The Running Time Depends on the Operating Environment. |
| Charging Method |
Mount in the Main Unit |
| Time Required for Charging |
Battery Pack x 1: Approx. 4.0 Hours
Battery Pack x 2: Approx. 8.0 Hours |
| Switchover in the Case of a Power Failure |
Because the Battery is Used Together with the AC Adapter, the Power Supply will be Switched Automatically to the Battery in the Event of a Power Failure.
Note: The AC Adapter is the Primary Power Source. |
| Operating Environment |
15°C to 40°C |
| Other Functions |
>> When Battery is Running Low, File is Closed Automatically
(When Captured to Internal Memory or USB Memory)
>> Remaining Amount Indicator |
GL800 User Manual (.pdf 9.78 MB)
How to Connect a 4-20mA Sensor (.pdf 400K)
MicroDAQ.com accepts
Visa, MasterCard and American Express
All prices are in U.S. Dollars.
No U.S. sales tax
|
