You have no items in your shopping cart.

Subtotal: $0.00

ICP Das

Filter Results

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  1. ICP Das I-7018 Analog Input DAQ Module with (8) Analog Inputs for Voltage, Current or Thermocouple

    I-7018

    $279.00

    8 Voltage, Current and Thermocouple Analog Inputs Module

    • (8) Analog Inputs for Voltage, Current or Thermocouple Sensor Probes
    • (6) Selectable Voltage Ranges: ±15 mV, ±50 mV, ±100 mV, ±500 mV, ±1 Volt and ±2.5 Volts
    • Accepts Type J, K, T, E, R, S, B, N and C Thermocouple Sensor Probes
    • 50 Hz Maximum Input Frequency and 1 ms Pulse Width Minimum on the Digital Input Channel
    • 2 Digital Outputs with 30 mA (Max) Output Load per Channel

    Includes Downloadable EZ Data Logger Software

  2. ICP Das I-7016P Strain Gauge, Voltage and Current Input DAQ Module Features (1) 6-Wire Analog Inputs, (1) Digital Input, (4) Digital Outputs, (1) Event Counter and (1) Voltage Output with RS-485 Serial Communications

    I-7016P

    $389.00

    6-Wire Strain Gauge, Voltage and Current Input Module

    • (1) 6-Wire Analog Input, (1) Digital Input, (4) Digital Outputs, (1) Event and (1) Voltage Output
    • 24-Bit Sigma Delta Analog-Digital Converter (ADC) for Increased Accuracy
    • 10 Samples per Second Sampling Rate
    • 4 Digital Outputs with 30 mA (Max) Output Load per Channel
    • Available with 4 1/2 Digit LED Screen

    Includes Downloadable EZ Data Logger Software

  3. ICP Das I-7017C Current Input DAQ Module Features (8) Differential Analog Inputs for Current with RS-485 Serial Communications

    I-7017C

    $289.00

    8 Current Analog Input DAQ Module

    • (8) Differential Analog Inputs for Current
    • 10 Samples/Second Sampling Rate with 0.1% Accuracy
    • (3) Selectable Current Ranges: 0 to 20 mA, ±200 mA and 4-20mA
    • 3000 Volt DC Field to Logic Intra-Module Isolation
    • LED Indicator for Power and Communications Status

    Includes Downloadable EZ Data Logger Software

  4. ICP Das I-7018P Analog Input DAQ Module with  Extended Thermocouple Sensor Type Support

    I-7018P

    $289.00

    8 Voltage, Current and Thermocouple Analog Inputs Module w/ Extended Thermocouple Support

    • (8) Analog Inputs for Voltage, Current or Thermocouple Sensor Probes
    • 6 Selectable Voltage Ranges: ±15 mV, ±50 mV, ±100 mV, ±500 mV, ±1 Volt and ±2.5 Volts
    • Accepts Type J, K, T, E, R, S, B, N, C, L and M Thermocouples
    • 50 Hz Maximum Input Frequency and 1 ms Pulse Width Minimum on the Digital Input Channel
    • 2 Digital Outputs with 30 mA (Max) Output Load per Channel

    Includes Downloadable EZ Data Logger Software

  5. ICP Das I-7021 DAQ Module with 1 Analog Output for Voltage or Current and RS-485 Serial Communications

    I-7021

    $259.00

    Analog Output DAQ Module

    • (1) Analog Output Channels for Voltage or Current with ±30uV/°C Zero Drift Voltage Output
    • Supports 0 to 20mA, 4-20 mA and 0 to 10 Volts Output Measurements
    • ±0.2% of FSR Accuracy and 1.0% of FSR Read Back Accuracy
    • 10ms DA Output Response Time and ±5ppm/°C Span Temperature Coefficient
    • 0.125 to 1024 mA/sec (Current) and 0.0625 to 512 Volts/sec (Voltage) Programmable Output

    Includes Downloadable EZ Data Logger Software

  6. ICP I-7021P Analog Output DAQ Module

    I-7021P

    $299.00

    Analog Output DAQ Module with Better Zero Drift Voltage Output

    • (1) Analog Output Channels for Voltage or Current with ±10uV/°C Zero Drift Voltage Output
    • Supports 0 to 20mA, 4-20 mA and 0 to 10 Volts Output Measurements
    • ±0.2% of FSR Accuracy and 1.0% of FSR Read Back Accuracy
    • 10ms DA Output Response Time and ±5ppm/°C Span Temperature Coefficient
    • 0.125 to 1024 mA/sec (Current) and 0.0625 to 512 Volts/sec (Voltage) Programmable Output

    Includes Downloadable EZ Data Logger Software

  7. ICP Das I-7033 3-Channel RTD Temperature DAQ Module Features (3) Analog Inputs for 2,  3 or 4 Wire RTD Sensor Probes with RS-485 Serial Communications

    I-7033

    $329.00

    3 Channel RTD Temperature DAQ Module

    • (3) Analog Input for 2, 3 or 4 Wire RTD Temperature Sensor Probes
    • 15 Samples/sec (60 Hz) or 12.5 Samples/sec (50 Hz) Sampling Rate
    • Accepts Type Pt100, Pt1000 or Ni RTD Sensor Probes
    • 15.7 Hz Bandwidth, ±0.1% Accuracy and ±0.5µV/°C Zero Drift
    • Available with 4 1/2 Digit LED Display

    Includes Downloadable EZ Data Logger Software

  8. ICP Das I-7041D is a Data Acquisition (DAQ) Module with (14) Sink or Source Isolated Digital Input or Counters

    I-7041

    $149.00

    14 Channel Digital Input DAQ Module

    • (14) Sink or Source Isolated Digital Input Channels or Counters
    • 100 Hz Input Frequency, 16-Bit Resolution (65,535) Counters
    • 3K Ohms (0.5 Watt) Input Impedance
    • On Voltage Level (4 Volt to 30 Volt) and Off Voltage Level (1 Volt Max)
    • Available with (14) Digital Input LED Indicators

    Downloadable DCON Utility and EZ Data Logger Software Available for Configuration

  9. ICP Das I-7043 is a Data Acquisition (DAQ) Module with (16) Non-Isolated Digital Outputs with No Short-Circuit Protection

    I-7043

    $149.00

    16 Channel Digital Output DAQ Module

    • (16) Non-Isolated Digital Output Channels with NO Short-Circuit Protection
    • 3.5 Volts to 30 Volts Output Voltage
    • 100mA Load Current Max Per Channel
    • Direct Drive Power Relay Module
    • Available with LED Indicators for Each Digital Output Channel

    Downloadable DCON Utility and EZ Data Logger Software Available for Configuration

  10. ICP Das I-7052 is a Data Acquistion (DAQ) Module with (8) Isolated Digital Inputs or Counters, 3K Ohms Input Impedance

    I-7052

    $139.00

    8 Channel DC Input Digital DAQ Module

    • (8) Isolated Digital Input or Counter Channels
    • (6) Fully Independent and (2) Common Ground Channels
    • 100 Hz Input Frequency, 16-Bit Resolution (65,535) Counters
    • 3K Ohms (0.3W) Input Impedance
    • Available with (8) LED Indicators for Digital Inputs
Filter Results

Page:
  1. 1
  2. 2
  3. 3
  4. 4