XStream Ethernet RF Modems
Maxstream Wireless Serial Communications via RJ-45 port
All MaxStream Products on Sale and Limited Quantities Available!
While Supplies Last!
View the complete list of Maxstream Products Available On Sale
 The XStream Ethernet RF modems provide long range,
low power wireless serial communication through any data system
having standard RJ-45 connectors. The modem transfers a standard
asynchronous serial data stream between two or more modems.
Modems are available for 900 MHz or 2.4 GHz ISM band. The 9XStream-PKG-E
900 MHz radio is approved for use in North America, Australia,
Israel & many other countries. The 24XStream-PKG-E 2.4 GHz radio was developed
for worldwide use.
Included With Each XStream Ethernet RF Modem
(1) Quick Start Guide
(1) CD with Documentation and Software Utility
(1) 1/2 wave Dipole Antenna
(1) 7 ft Ethernet Cable
(1) 7 ft Crossover Ethernet Cable
(1) AC Power Adapter
NOTE: Large Quantity Discounts Are Available!
Features Specifications More Information Notes
XStream Ethernet RF Modem Features
- FCC (U.S.) and IC (Canada)
Approved
- Plug-and-communicate (default configuration provides
instant RF communications)
- True peer-to-peer network (no need to configure a "Master" radio)
- Transparent mode supports existing software applications and
legacy systems
- Addressing capabilities provide for point-to-point and point-to-multipoint
networks
- Uses Standard AT commands and/or fast binary commands for
reading/setting modem parameters
- Includes free X-CTU Software that facilitates range testing,
host setup and modem configuration
- Retries and acknowledgements provide reliable delivery of
critical packets in difficult environments
- Networking features allow up to 7 independent pairs (networks)
to operate in close proximity
- Multiple low power modes including pin sleep, cyclic sleep
and serial port sleep for current consumption as low as 1 mA
- Host interface baud rates from 1200 to 57600 bps
- Signal strength register for link quality monitoring and debugging
- Field upgradeable firmware
- For ethernet bridging, the MaxStream
Xpress is available
- View the MaxStream Governmental Agency Approval List
Other MaxStream XStream Data Interface Options
More Information
Notes:
1 ) Prices are per unit.
2) 2 or more units required for operation. Additional units
can be added for multipoint connection.
3) Connection can be serial to serial, serial to USB or
serial to Ethernet.
Units cannot be used for USB or Ethernet
bridging, i.e. going USB to USB. Serial units are dip
switchable to be RS-232,422 and 485.
4) Modems are available in 900MHz or 2.4 GHz. See the application note for differences.
5) Customers interested in 900 MHz modems for use in Israel, Australia
and New Zealand should contact
us to order the XH9 series instead of the XO9 series. The
frequency
used is slightly different in those countries.
MicroDAQ.com accepts
Visa, MasterCard and American Express
All prices are in U.S. Dollars.
No U.S. sales tax
|
