XStream RS-232/RS-485 RF Modems
Maxstream Wireless Serial Communications
All MaxStream Products on Sale and Limited Quantities Available!
While Supplies Last!
View the complete list of Maxstream Products Available On Sale
 The XStream RS-232/RS-485 radio modems provide long range,
low power wireless serial communication. Modems are available
for 900 MHz or 2.4 GHz ISM band. The 9XStream-PKG-R 900 MHz
radio is approved for use in North America, Australia, Israel & many
other countries. The 24XStream-PKG-R 2.4 GHz radio was developed
for worldwide use. Units are DIP Switchable for RS-232,
RS-422, and RS-485 support.
Included With Each XStream RS232/485 RF Modem
(1) 6 ft RS-232 Cable
(1) Quick Start Guide
(1) CD with Documentation and Software Utility
(1) 1/2 wave Dipole Antenna
(1) Serial Loopback Adapter
(1) Null Modem Adapter (male-to-male)
(1) Male DB-9 to RJ-45 Adapter
(1) Female DB-9 to RJ-45 Adapter
(1) Power Adapter
(1) 9 Volt Battery Adapter
NOTE: Large Quantity Discounts Are Available!
Features Specifications More Information Application Notes
XStream RS-232/RS-485 RF Modem Features
- FCC (U.S.) and IC (Canada) Approved
- Plug-and-communicate (default configuration provides
instant RF communications)
- True peer-to-peer network (no need to configure a "Master" radio)
- Addressing capabilities provide for point-to-point and point-to-multipoint Networks
- Uses Standard AT commands and/or fast binary commands for setting/reading modem parameters
- Includes FREE X-CTU Software that facilitates range testing, host setup and modem configuration
- Retries and acknowledgements provide reliable delivery of critical packets in difficult environments
- Networking features allow up to 7 independent pairs (networks) to operate in close proximity
- Multiple low power modes including pin sleep, cyclic sleep and serial port sleep for current consumption as low as 1 mA
- Host interface baud rates from 1200 to 57600 bps
- Signal strength register for link quality monitoring and debugging
- Parity support (None, Even, Odd, Mark, Space)
- Transparent mode supports existing software applications and legacy systems
- Modbus Support
- DCD Support
- 9-bit Support
- Field Upgradeable Firmware
- View the MaxStream Governmental Agency Approval List
More Information
Notes:
1 ) Prices are per unit.
2) 2 or more units required for operation. Additional units
can be added for multipoint connection.
3) Connection can be serial to serial, serial to USB or
serial to Ethernet.
Units cannot be used for USB or Ethernet
bridging, i.e. going USB to USB. Serial units are dip
switchable to be RS-232,422 and 485.
4) Modems are available in 900MHz or 2.4 GHz. See the application
note for differences.
5) Customers interested in 900 MHz modems for use in Israel, Australia
and New Zealand should contact
us to order the XH9 series instead of the XO9 series. The
frequency
used is slightly different in those countries.
Other MaxStream XStream Data Interface Options
MicroDAQ.com accepts
Visa, MasterCard and American Express
All prices are in U.S. Dollars.
No U.S. sales tax
|
