9Xtend Wireless RS232/485 Modems
Maxstream 1 Watt 900 MHz Frequency Hopping Spread Spectrum Transceivers
All MaxStream Products on Sale and Limited Quantities Available!
While Supplies Last!
View the complete list of Maxstream Products Available On Sale
The 9XTend RF modems provide unprecedented performance in a low cost
radio modem. The 9XTend is MaxStream's longest range (up
to 40 miles in RF line-of-sight), low power RF module.
This affordable RF module allows for robust performance
in North America.
Included with Each Xtend Modem Package
(1) 6 ft. RS-232 Cable
(1) Quick Start Guide
(1) CD with Documentation and Software Utility
(1) 1/2 Wave Dipole Antenna
(1) Serial Loopback Adapter
(1) Null Modem Adapter (male-to-male)
(1) Male DB-9 to RJ-45 Adapter
(1) Female DB-9 to RJ-45 Adapter
(1) Power Adapter
(1) 9 Volt Battery Adapter
NOTE: Large Quantity Discounts Are Available!
Features Specifications More Information
9Xtend Wireless RS232/485 ModemFeatures
Long Range at Low Cost
- Up to 40 mile (64km) range (RF line-of-sight, @9600 baud RF data rate)
- Up to 20 mile (32km) range (RF line-of-sight, @115200 baud RF data
rate)
- Up to 3000' (900m) range (indoor/urban environments, @9600 RF data rate)
- Up to 1500' (450m) range (indoor/urban environments, @115200 RF data
rate)
- 1 Watt Power Output (1 mW - 1 W, software selectable)
- -110 dBm Receiver Sensitivity (@ 9600 baud)
- -103 dBm Receiver Sensitivity (@ 115200 baud)
Advanced Networking
- True Peer-to-Peer (no “master” required), Point-to-Point & Point-to-Multipoint
- Retries and Acknowledgements
- 10 hopping channels each with over 65,000 network addresses available
Additional Features
- Industrial grade units rated for-45°C to 85°C
- Plug-and-communicate (no configuration required)
- Transparent operation supports existing software & systems
- Simple configuration using software & standard AT commands
- Simple UART interface
- RS-232/422/485 protocol support
- Multi-drop bus support
- True peer-to-peer networking (no “Master” radio needed)
- Support for point-to-point & point-to-multipoint networks
- Up to 65,000 network addresses available
- Allows up to 10 Frequency Hopping Spread Spectrum independent pairs (networks)
to operate in close proximity
- RF data rate of 10000 bps or 115,200 bps
- Host interface baud rates from 1200 bps to 230,400 bps
- XON / XOFF or hardware flow control
- Signal strength reporting for link quality monitoring & debugging
- Support for multiple data formats (7/8 bits, Even/Odd/No
Parity)
- XBee Xtender RF Bridge Available to Build Longer Range Networks
More Information
MicroDAQ.com accepts Visa, MasterCard and American Express

All prices are in U.S. Dollars.
No U.S. sales tax
|