DASYLab Software - Module Details
DASYLab Software Module Functions
NOTE: All functions are not available with all versions. Please consult the version
chart to see if the function, or feature is available.
Inputs/Outputs
Analog In-/Output:
Up to 32 input modules and up to 512 channels up to 2 output
modules and up to 32 channels
Digital In-/Output:
Up to 32 input modules and up to 512 channels up to 2 output
modules and up to 32 channels
Counter Input:
Up to 2 modules and up to 32 channels
Frequency Output:
Up to 2 modules and up to 32 channels
RS 232 Input:
Extremely expandable with Master/ Slave modules (up to 256
channels with each serial interface)
RS 232 Output:
Output of data or fixed strings for up to 16 channels
Icom Input: Universal serial module to be used with
TCP/IP,GPIB and RS232. Master-/ Slave modules with max. 256
channels.
Icom Output:
Output of data or Strings via TCP/IP, GPIB or RS232.
IEEE 48 In-/Output:
supports Measurement Computing GPIB, National Instruments,
INES (Input only), or IOtech hardware
DDE In-/Output:
Up to 16 modules and up to 256 channels
IVI Modules:
Handles devices with an IVI compatible interface (Oscilloscope,
Multimeter, Function Generator).
MODBUS Modules:
With these modules the MODBUS protocol enables DASYLab to
read and write Analog and Digital registers for signed
and unsigned integer registers, RS232 only.
Signal Processing
Filter:
Digital IIR filter with definable order and
characteristics
Correlation:
Compute correlation coefficient, cross-correlation,
autocorrelation, spectrum
Data Window:
Various types of evaluation windows, e.g.
rectangle, Gauss, Bartlet and other types
FFT:
Calculate and analyse the discrete spectrum of
a signal
Polar/Cartesian:
Convert data values between polar
and cartesian coordinates
Electrical Characteritics:
Use the values of Current
and Voltage to calculate electric characteristics such as
Ueff, cosp etc..
Harmonic Distortion:
Calculates the amplitude and phase
of the fundamental frequency and up to 48 harmonic waves.
Period Check:
Calculates the period of a signal by
checking its zero crossings.Period Check: Calculates
the period of a signal by checking its zero crossings.
Trigger
Start/Stop Trigger:
Selectable start and stop conditions
Pre/Post Trigger:
Amplitude- and slope-based triggers
with hysteresis can be specified
Combi Trigger:
Separate signal segments according to
logical conditions
SampleTrigger:
Separate intervals of a signal based
on a predetermined number of samples.
Trigger on Demand:
Separate samples depending on the
dynamic behavior of the signals.
Relay:
Control up to 15 channels with one input signal
Control
Generator:
Signal generation with frequency and amplitude
modulation
Switch:
On/off or momentary switch for program and
data control
Coded Switch:
Select from preset values by positioning
a rotating switch or clicking on buttons.
Slider:
Definable signal range; signal level to be
modified during measurement
PID Control:
Proportional, integral and derivative
components can be specified freely; new auto-tuning function
Two Point Control: Up to 8 control circuits. Selectable
set values are compared with actual values
Time Delay:
Data output after a specified period of
time
Latch:
Constantly outputs the input value received
last
TTL Pulse Generator:
generates TTL signals with specified
duration and switch conditions
Read Variable:
Read Global Variable to generate a data
channel to be used in the worksheet
Save Variable:
Save data channel to a Global Variable
to be used in module parameters and computations
Router: Route data channel based on control input (amplitude
or edge) or based on time (blocks, time, or action controlled)
Block Time:
Extracts the time information of a block
and puts time and date into global variables.
Stop:
Stops or interrupts measurement according to
specified conditions.
Display
Y/t Chart:
High-speed scope display for fast data with
a wide range of display options
X/Y Chart:
Display data blocks of two dependent signals
as an X/Y plot, including a Polar plot view.
Polar Plot Chart:
Display data blocks of two dependent
signals (X/Y or polar data) in polar coordinates with a third
data as flags.
Analog Meter:
Provides several shapes of instruments
and offers peak hold and trend indicator options
Digital Meter:
Display the value, with trend display
and lower/upper marks. Formats include decimal, hex, octal,
binary, ASCII & Clock
Bar Graph:
Bar (horizontal/vertical), thermometer,
LED or triangle style; trend and range display options
Chart Recorder:
Chart display for slow data, wide display
area and a wide range of display options.
List:
Show data values displayed in list form; several
formatting options
Status Lamp:
TTL or Digital Signal status displayed
as text and/or images.
Files
Read Data:
Read data from floppy/hard disk files; supports
DASYLab, IEEE-32-bit, ASCII format
Write Data:
Write data to floppy/hard disk files; supports
DASYLab, IEEE-32-bit, ASCII, Diadem and other formats
ODBC Input/Output:
Exchange data between DASYLab and ODBC
data bases.
Data Reduction
Average:
Reduce data using running or summation averages
Block Average/Peak Hold:
Reduce data across data blocks
using running or summation average, or using Peak Hold (Minima
or Maxima)
Separate:
Reduce data by skipping defined number of
samples (or blocks) only; outputs one, then repeats
Merge/Expand:
Merge data from several channels or distribute
signals from one channel to others
Cut Out Block:
Output specified samples of a block
Time Slice:
Output data from different channels according
to specified switch conditions
Shift Register:
Stores data, one point at a time, into
a temporary register, and outputs the block repeatedly
Circular Buffer:
Save an interval of the data stream
and send it to the modules output via event driven action
Special Modules
Black Box:
Sub-worksheet unit containing worksheet
sections; use for common functions or to manage complexity
Import/Export (Black Box):
Data interface between worksheet
levels (main worksheet and Black Boxes)
Action:
Trigger various actions on the occurence of
specified events
Message:
Display or print an operator message; play
a wave/AVI file; send DDE message; log messages to dedicated
printer
Time base:
Extract and output the time or frequency
information of a signal
Signal Adaptation:
Synchronize signal flows of differing
characteristics
Send e-Mail:
Use Windows E-Mail to send messages to
any address including attachments and custom messages/alarms
Mathematics
Formula Interpreter:
Link data from several channels
according to mathematical functions entered as formulas
Arithmetic:
Basic arithmetic operations; various operands
and exponential functions
Trigonometry:
Sine, tangent, arc- and hyperbolic functions
Differentiation/Integration:
Integration of signal
values or slopes in the signal flow
Scaling:
Linear scaling, interpolation tables, RTD
linearization, thermocouple linearization, offset adjust,
linear conversion factors for a large number of measurement
systems
Slope Limitation:
Limit the difference between values
Reference Curve:
Calculates a reference Curve using
one or more test runs
Logical Operations:
Evaluate TTL data from input channels;
operators AND, OR, XOR, NAND, NOT
Bit Operations:
Perform logical operations (bit by
bit) with the received data words, combine, extract, mask
and shift operations
Flip-Flop:
Use bistable trigger elements for intermediate
data storage (FlipFlop and MonoFlop)
Gray-Code:
Decodes signals generated by position encoders
Channel Comparator:
Compares channels and a constant
or to corresponding channels.
Statistics
Statistical Values:
Compute max/min, average, effective
values, variance and standard deviation.
Position in Signal:
Extract the value position as defined
by sample number, date/time or frequency
Histogram:
Classify data according to specific intervals
and numbers of classes
Regression:
Calculate constant, linear or polynomial
regression curves up to an order of 20
Counter:
Count blocks, edges, samples, maxima/minima,
zero/level crossings and duration
Minimum/Maximum:
Determine extreme values in the signal
flow
Check Reference Curve:
Compare the signal with a previously
saved reference curve and signal deviations.
Pulse Width Analysis:
Calculates the frequency, length
of pulses, pauses and pulse/pause ratio in a TTL pulsed signal.
Channel Sort:
Rearranges the input channels based on
their values.
Network
Net Input/Output:
Receive or send data to one or more
DASYLab Net via a TCP/IPnetwork
Message Input/Output:
Receives or Sends messages from
or to other DASYLab Net via a TCP/IP network.
DataSocket Import/Export:
Exchange data with OPC server
via network.
Analysis Add-On (optional)
Sequence Generator:
Generate curves and ramps of different
types which can be combined in many ways.
Transfer Function:
The Transfer and Coherence functions
are calculated for up to 8 pairs of values.
Block Weighting:
Weight each sample in block by a predefined
function.
Convolution:
Up to 16 Input signals are processed (superimposed)
with digital filters.
Write UFF Format:
Write data in the Universal File
Format 58 for use in system analysis.
FFT Filter:
Frequency intervals of up to 16 signals
are filtered with defined conditions.
Universal Filter:
Create user defined FIR or IRR Filters
with a helpful filter wizard for FIR Filters.
FFT Maximum:
Calculates the maximum of energy of a
FFT spectrum by analysing intervals of the frequency band.
n-th Order Harmonic:
Calculates the maximum of the
Harmonic up to an order of 20 of FFT data
Rainflow:
Several counting algorithms classify samples
for Time-Stress Analysis
Two-channel Classification:
Classifies the values of
two diferrent temporal functions to be used for Time-Stress
Analysis.
Octave Analysis:
This module is used for One-Third
or Octave Analysis of a signal using digital filters optimized
to 40KHz
Ordering Information
| Description |
Part Number |
Qty 1-9 |
Qty 10+ |
|
| DASYLab Data Acquisition Software |
| DASYLab Lite DAQ Software |
DASYLab_Lite
|
$499.00 |
call |
 |
| DASYLab Basic DAQ Software |
DASYLab_Basic
|
$1,299.00 |
call |
|
| DASYLab Full DAQ Software |
DASYLab_Full
|
$1,799.00 |
call |
|
| DASYLab Pro DAQ Software |
DASYLab_Pro
|
$2,499.00 |
call |
|
| Additional DASYLab Runtime License |
DASYLab_Runtime
|
$449.00 |
call |
|
- You may change quantities from within your cart.
- If you do not wish to order online call us toll free
at 877-275-9606 between the hours of 9-5 Eastern Standard
time.
MicroDAQ.com accepts
Visa, MasterCard and American Express
All prices are in U.S. Dollars.
No U.S. sales tax
|
