HOBO 4-Channel External Data Logger
4-Channels that all accept external sensors and input cables for:
Temperature, AC Current, 4-20mA, 0-2.5 Volts DC
The HOBO 4-Channel External has 4 channels that all accept external sensors and input cables. It
will measure
and record up to 32,520 readings. It's reading rate is user
selectable with sampling intervals being 0.5 seconds to 9 hours,
recording times up to 1 year. Additional features include programmable
start time/date and nonvolatile EEPROM memory which retains data even if
battery fails.
Features and specifications
- Accepts
external sensors and input cables for temperature,
AC current, 0-2.5 Volt DC and 4-20 mA
- Capacity: 32,520 measurements total
- User-selectable sampling interval: 0.5 seconds to
9 hours, recording times up to 1 year
- Readout and relaunch with optional HOBO
Shuttle
- Drop-proof to 5'
- Mounting kit included (hook/loop, magnet, and tape)
- Programmable start time/date
- Memory modes: stop when full, wrap-around when full
- Nonvolatile EEPROM memory retains data even if battery
fails
- Blinking LED light confirms operation
- User-replaceable battery lasts 1 year
- Battery level indication at launch
- Operating range: -4°F to +158°F (-20°C to +70°C),
0 to 95% relative humidity, non-condensing, non-fogging
- Time accuracy: ±1 minute per week at +68°F (+20°C)
- Size/Weight: 2.4 x 1.9 x 0.8" (60 x 48 x 19
mm)/approx. 1 oz (27 gms)
- Compatible with Keyspan USB 4-Port Serial Adapter for USB Connectivity
Wide range of sensors available
There are a wide range of external
sensors and input cables available for the HOBO H8 Outdoor/Industrial
4-Channel External datalogger:
- TMCx-HD series temperature sensors with lengths from
1' to 50'
- TMC6-HC stainless steel temperature probe
- Split-core AC current sensors, with ranges from 0-20 A to 0-600 A
(these are not weatherproof)
- 0-2.5 V input cable
- 4-20 mA input cable
External input specifications
- 2.5 mm jack: ground, input, switched 2.5 Volts output; ground
connection is the same as PC interface connector ground
- Input range: 0 to +2.5 Volts DC
- Accuracy: ±10 mV ±1% of reading
- Resolution: 10 mV (8-bit)
- Output power: ±2.5 Volts DC at 2 mA, active only during
measurements
Software and Accessories
NOTE: A BoxCar Pro or
BoxCar starter kit is required
to operate any of the H8 Family loggers. Each Box Car starter
kit includes software, PC interface cable and software manual.
| Description |
Part Number |
Qty 1-9 |
Qty 10+ |
|
| HOBO 4-Channel External Data Logger |
H08-006-04
|
$115.00 |
$107.00 |
 |
| Software Starter Kits - One
Required |
| BoxCar Pro 4.3 Software and Serial Cable Kit |
BCP4.3-DL
|
$110.00 |
$103.00 |
|
| BoxCar 3.7 Software and Serial Cable Kit |
BC3.7
|
$39.00 |
$37.00 |
|
| Optional Accessories |
| Extra/Replacement Batteries (pack of 5) - CR2032 lithium batteries |
HRB-Temp-5
|
$8.00 |
$7.00 |
|
| Extra Serial Interface Cable |
Cable-PC-3.5
|
$9.00 |
$8.00 |
|
| Glacier Clear Xtreme Protective Case (3.93" x 2.4" x 0.94") |
T1000.1
|
$9.00 |
call |
|
| Blue Xtreme Protective Case (3.93" x 2.4" x 0.94") |
T1000.4
|
$9.00 |
call |
|
| USB 4-Port Serial Adapter |
USA-49WG
|
$149.00 |
call |
|
| Waterproof Temperature Sensors |
| 1ft Air/Water/Soil temperature sensor |
TMC1-HD
|
$28.00 |
$26.00 |
|
| 6ft Air/Water/Soil Temperature Sensor |
TMC6-HD
|
$30.00 |
$28.00 |
|
| 20ft Air/Water/Soil temperature sensor |
TMC20-HD
|
$35.00 |
$33.00 |
|
| 50ft Air/Water/Soil temperature sensor |
TMC50-HD
|
$40.00 |
$38.00 |
|
| Stainless Steel Temperature
Probe |
| Stainless Steel Temperature Probe (4" Probe with 6' Cable) |
TMC6-HC
|
$75.00 |
$69.00 |
|
| Voltage |
| Voltage Input Cable |
Cable-2-5-Stereo
|
$8.00 |
$7.00 |
|
| Voltage Transmitters |
| conLab AC Voltage Transmitter - 150 VAC |
T-CON-ACT-150
|
$135.00 |
call |
|
| conLab AC Voltage Transmitter - 300 VAC |
T-CON-ACT-300
|
$135.00 |
call |
|
| 4-20mA |
| 4-20 mA Cable |
Cable-4-20ma
|
$22.00 |
$17.00 |
|
| Split Core AC Sensors |
| 0-20 Amp split-core AC Current Sensor |
CTV-A
|
$86.00 |
$80.00 |
|
| 0-50 Amp split-core AC current sensor |
CTV-B
|
$86.00 |
$80.00 |
|
| 0-100 Amp split-core AC current sensor |
CTV-C
|
$86.00 |
$80.00 |
|
| 0-200 Amp split-core AC Current Sensor |
CTV-D
|
$109.00 |
$101.00 |
|
| 0-600 Amp split-core AC Current Sensor |
CTV-E
|
$109.00 |
$101.00 |
|
| Carbon Dixoide |
| Telaire 7001 Carbon Dioxide (CO2) Monitor |
TELAIRE-7001
|
$449.00 |
$439.00 |
|
| Telaire CO2 Monitor to Data Logger Cable |
Cable-CO2
|
$25.00 |
$23.00 |
|
| Standard NIST Calibration Service |
MicroDAQ.com accepts
Visa, MasterCard and American Express
All prices are in U.S. Dollars.
No U.S. sales tax
|
