HOBO Temperature Data Logger
The HOBO Temp is the basic HOBO single channel temperature recorder. It
will measure
and record up to 7,943 temperature readings. It's reading rate is
user selectable with sampling intervals being 0.5 seconds to 9 hours,
recording times up to 1 year. Additional features include programmable
start time/date, nonvolatile EEPROM memory which retains data even if
battery fails and an extendable internal temperature sensor.
Features and
Specifications
- Capacity: 7943
measurements total
- User-selectable sampling interval: 0.5 seconds to 9 hours, recording times up to 1 year
- Readout and
relaunch with optional HOBO Shuttle
- Internal
temperature sensor on 4" wire can extend from case
- Precision
components eliminate the need for user calibration
- Drop-proof to 5
feet
- Mounting kit
included (hook/loop, magnet, and tape)
- Programmable start
time/date
- Memory modes: stop
when full, wrap-around when full
- Nonvolatile EEPROM
memory retains data even if battery fails
- Blinking LED light
confirms operation
- User-replaceable
battery lasts 1 year
- Battery level
indication at launch
- Operating range:
-4°F to +158°F
(-20°C to +70°C), 0 to 95% relative humidity, non-condensing,
non-fogging
- Time accuracy: ±1
minute per week at +68°F (+20°C)
- Size/Weight: 2.4 x
1.9 x 0.8" (68 x 48 x 19 mm)/approx. 1 oz.(29 gms)
- Compliance certificate
available
- Compatible with Keyspan USB 4-Port Serial Adapter for USB Connectivity
Measurements
Specifications: Temperature (internal sensor)
- Range: -4°F to +158°F (-20°C to +70°C)
- Range for internal sensor when used outside of case:
-40°F to +248°F (-40°C to +120°C)
- Accuracy: ±1.27°F (±0.7°C) at +70°F, see plot to the right
- Resolution: 0.7°F (0.4°C) at +70°F
- Response time still in air: 15 min. typical with sensor inside
case; 1 min. typical with sensor outside case
|
 |
Software and Accessories
NOTE: A BoxCar Pro or
BoxCar starter kit is required
to operate any of the H8 Family loggers. Each Box Car starter
kit includes software, PC interface cable and software manual.
Ordering Information
| Description |
Part Number |
Qty 1-9 |
Qty 10+ |
|
| HOBO Temperature Logger |
H08-001-02
|
$79.00 |
$74.00 |
 |
| Software Starter Kits - One
Required |
| BoxCar Pro 4.3 Software and Serial Cable Kit |
BCP4.3-DL
|
$110.00 |
$103.00 |
|
| BoxCar 3.7 Software and Serial Cable Kit |
BC3.7
|
$39.00 |
$37.00 |
|
| Standard NIST Calibration Service |
| Optional Accessories |
| Extra/Replacement Batteries (pack of 5) - CR2032 lithium batteries |
HRB-Temp-5
|
$8.00 |
$7.00 |
|
| Extra Serial Interface Cable |
Cable-PC-3.5
|
$9.00 |
$8.00 |
|
| Glacier Clear Xtreme Protective Case (3.93" x 2.4" x 0.94") |
T1000.1
|
$9.00 |
call |
|
| Blue Xtreme Protective Case (3.93" x 2.4" x 0.94") |
T1000.4
|
$9.00 |
call |
|
| USB 4-Port Serial Adapter |
USA-49WG
|
$149.00 |
call |
|
- You may change quantities from within your cart.
- If you do not wish to order online call us toll free at 877-275-9606
between the hours of 9-5 Eastern Standard time.
MicroDAQ.com accepts
Visa, MasterCard and American Express
All prices are in U.S. Dollars.
No U.S. sales tax
|
