HOBO RH & Temperature Data Logger
The HOBO RH/Temp is a 2-channel temperature and relative humidity data
logger. It will measure
and record up to 7,943 readings. It's reading rate is user
selectable with sampling intervals being 0.5 seconds to 9 hours,
recording times up to 1 year. Additional features include programmable
start time/date, nonvolatile EEPROM memory which retains data even if
battery fails and an extendable internal temperature sensor.
Features and
Specifications
- Capacity: 7,943 measurements total
- User-selectable sampling interval: 0.5 seconds to
9 hours, recording times up to 1 year
- Readout and relaunch with optional HOBO
Shuttle
- Internal temperature sensor on 4" wire can
extend from case
- Precision components eliminate the need for user
calibration
- Drop-proof to 5 feet
- Mounting kit included (hook/loop, magnet, and tape)
- Programmable start time/date
- Memory modes: stop when full, wrap-around when full
- Nonvolatile EEPROM memory retains data even if battery
fails
- Blinking LED light confirms operation
- User-replaceable battery lasts 1 year
- Battery level indication at launch
- Operating range: -4°F to +158°F
(-20°C to +70°C), 0 to 95% relative humidity, non-condensing,
non-fogging (see RH sensor range below)
- Time accuracy: ±1 minute per week at +68°F (+20°C)
- Size/Weight: 2.4 x 1.9 x 0.8" (68 x 48 x 19
mm)/approx. 1 oz.(29 gms)
- Compliance certificate available
- Compatible with Keyspan USB4-Port Serial Adapter for USB Connectivity
Temperature
(internal sensor)
- Range: -4°F to +158°F (-20°C to +70°C)
- Range for internal sensor when used outside of case:
-40°F to +248°F (-40°C to +120°C)
- Accuracy: ±1.27°F (±0.7°C) at +70°F, see plot to the right
- Resolution: 0.7°F (0.4°C) at +70°F
- Response time still in air: 15 min. typical with sensor inside
case; 1 min. typical with sensor outside case
|
 |
Relative humidity
(user-replaceable RH sensor)
- Range: 25% to 95% RH at +80°F for intervals of > 10
seconds, non-condensing and non-fogging, see plot to the right.
- Accuracy: ±5%
- Response time 10 min. typical in air
- Sensor operating environment: +41°F to +122°F (+5°C to +50°C)
non-condensing and non-fogging
|
 |
Software and Accessories
NOTE: A BoxCar
Pro or
BoxCar starter kit is required
to operate any of the HOBO H8 Family
dataloggers. Each Box Car
starter kit includes software, PC interface cable and software
manual.
Ordering Information
| Description |
Part Number |
Qty 1-9 |
Qty 10+ |
|
| HOBO RH/Temp, 2 channel Data Logger |
H08-003-02
|
$105.00 |
$98.00 |
 |
| Software Starter Kits - One
Required |
| BoxCar Pro 4.3 Software and Serial Cable Kit |
BCP4.3-DL
|
$110.00 |
$103.00 |
|
| BoxCar 3.7 Software and Serial Cable Kit |
BC3.7
|
$39.00 |
$37.00 |
|
| Standard NIST Calibration Service |
| Optional Accessories |
| Extra/Replacement Batteries (pack of 5) - CR2032 lithium batteries |
HRB-Temp-5
|
$8.00 |
$7.00 |
|
| Extra Serial Interface Cable |
Cable-PC-3.5
|
$9.00 |
$8.00 |
|
| Glacier Clear Xtreme Protective Case (3.93" x 2.4" x 0.94") |
T1000.1
|
$9.00 |
call |
|
| Blue Xtreme Protective Case (3.93" x 2.4" x 0.94") |
T1000.4
|
$9.00 |
call |
|
| USB 4-Port Serial Adapter |
USA-49WG
|
$149.00 |
call |
|
- You may change quantities from within your cart.
- If you do not wish to order online call us toll free at 877-275-9606
between the hours of 9-5 Eastern Standard time.
MicroDAQ.com accepts
Visa, MasterCard and American Express
All prices are in U.S. Dollars.
No U.S. sales tax
|
