HOBO RH/Temp/2x External Data Logger
Onset 4-Channel Temperature, RH Data Logger with 2 External Inputs
 The HOBO RH/Temp/2xExternal data logger is a 4-Channel device measuring temperature and humidity and 2 additional parameters with the external inputs. The logger will log and record up to 7,943 Samples/Readings. The data logger features a user selectable sampling interval of 0.5 seconds to 9 hours, programmable start date/time, user replaceable battery, mutiple operating modes (stop when full, overwrite when full) and non-volatile memory retains data even if battery fails.
Included with Data Logger
>> Mounting Kit (Hook/Loop, Magnet, and Tape)
Required with the Data Logger
>> BoxCar Software Kit
List of Available External Sensors. (Temperature, AC Current, 0-2.5 Volt DC and 4-20 mA)
NOTE: NIST Calibration is available.
Large Quantity Discounts Are Available!
Due to New CE Requirements, this product is No Longer Available for EU Countries, Check out the U12-013 Data Logger As An Alternative.
Features Specifications Compatible External Sensors
| Description |
Part Number |
Qty 1-9 |
Qty 10+ |
|
| HOBO RH/Temp/2xExternal, 4 channels |
H08-007-02
|
$165.00 |
$153.00 |
 |
| Software Kits - 1 Required |
| BoxCar Pro 4.3 Software and Serial Cable Kit |
BCP4.3-ON
|
$125.00 |
$118.00 |
|
| BoxCar 3.7 Software and Serial Cable Kit |
BC3.7
|
$55.00 |
$53.00 |
|
| Optional Accessories |
| USB Serial Adapter |
CABLE-USB232
|
$39.00 |
$35.00 |
|
| Extra/Replacement Batteries (pack of 5) - CR2032 Lithium Batteries |
HRB-TEMP-5
|
$10.00 |
$8.00 |
|
| Extra Serial Interface Cable |
Cable-PC-3.5
|
$10.00 |
$9.00 |
|
| Glacier Clear Xtreme Protective Case (3.93" x 2.4" x 0.94") |
T1000.1
|
$9.00 |
call |
|
| Blue Xtreme Protective Case (3.93" x 2.4" x 0.94") |
T1000.4
|
$9.00 |
call |
|
| Replacement RH Sensor for H8 Indoor Loggers |
HUM-UPS-500
|
$19.00 |
call |
|
| Standard NIST Calibration Service |
| Standard NIST 4-20mA Calibration (1 Point) Note: 3 to 5 Day Lead Time for All Calibration Orders |
CAL-NIST-420MA
|
$10.00 |
call |
|
| Compatible Sensors |
| Onset Air Temperature Sensor |
TMC6-HE
|
$35.00 |
call |
|
| 1ft Air/Water/Soil Temperature Sensor |
TMC1-HD
|
$32.00 |
$30.00 |
|
| 6ft Air/Water/Soil Temperature Sensor |
TMC6-HD
|
$35.00 |
$33.00 |
|
| 20ft Air/Water/Soil Temperature Sensor |
TMC20-HD
|
$40.00 |
$38.00 |
|
| 50ft Air/Water/Soil Temperature Sensor |
TMC50-HD
|
$45.00 |
$43.00 |
|
| Stainless Steel Temperature Probe (4" Probe with 6' Cable) |
TMC6-HC
|
$79.00 |
$73.00 |
|
| Voltage Input Cable |
CABLE-2.5-STEREO
|
$9.00 |
$8.00 |
|
| 4-20 mA Cable |
CABLE-4-20MA
|
$25.00 |
$20.00 |
|
| 0-20 Amp split-core AC Current Sensor |
CTV-A
|
$90.00 |
$84.00 |
|
| 0-50 Amp split-core AC current sensor |
CTV-B
|
$90.00 |
$84.00 |
|
| 0-100 Amp split-core AC current sensor |
CTV-C
|
$90.00 |
$84.00 |
|
| 0-200 Amp split-core AC Current Sensor |
CTV-D
|
$115.00 |
$107.00 |
|
| 0-600 Amp split-core AC Current Sensor |
CTV-E
|
$115.00 |
$107.00 |
|
| Telaire 7001 Carbon Dioxide (CO2) Monitor |
TELAIRE-7001
|
$459.00 |
$449.00 |
|
| Telaire CO2 Monitor to Data Logger Cable |
CABLE-CO2
|
$29.00 |
$27.00 |
|
| AC Voltage Transmitters View Specs |
| conLab AC Voltage Transmitter - 150 VAC |
T-CON-ACT-150
|
$139.00 |
call |
|
| conLab AC Voltage Transmitter - 300 VAC |
T-CON-ACT-300
|
$139.00 |
call |
|
Temperature, RH Data Logger with 2 External Inputs Features
- 4 Channel Data Logger with Internal Temperature, Humidity and 2 External Inputs
- Internal Temperature Sensor on 4" Wire can Extend from Case
- External Input Accepts Temperature, AC Current, 4-20 mA and 0-2.5 Volts DC Sensors. See List of Compatible External
Sensors
- Readout and Relaunch Logger with Optional HOBO Shuttle
- Programmable Start Time/Date
- Nonvolatile EEPROM Memory Retains Data Even If Battery Fails
- Blinking LED Light Confirms Operation
- Battery Level Indication at Launch
- Requires BoxCar Software Kit for Operation and Data Manipulation
Temperature, RH Data Logger w/ 2 External Inputs Specifications
| Data Storage Capacity |
7,943 8-bit Samples/Readings |
| Sampling Rate |
0.5 Second to 9 Hours (User Selectable) |
| Operating Range |
Temperature: -20°C to 70°C (-4°F to 158°F)
Humidity: 0 to 95% RH non-condensing, non-fogging |
| Operating Modes |
Stop When Full
Wrap-Around When Full |
| Temperature Sensor |
Range: -4°F to 158°F (-20°C to 70°C)
Range Outside Case: -40°F to 248°F (-40°C to 120°C)
Accuracy: ±1.27°F (±0.7°C) at +70°F
Resolution: 0.7°F (0.4°C) at +70°F
Response Time (Sensor Inside Case): 15 min.
Response Time (Sensor Outside Case): 1 min. |
| Humidity Sensor |
Range: 25% to 95% RH at 80°F for Intervals < 10 Sec, Non-Condensing and Non-Fogging
Accuracy: ±5%
Response Time (In Air): 10 min.
Sensor Operating Environment: 5°C to 50°C (41°F to 122°F) , Non-Condensing and Non-Fogging |
| Compatible External Input Types |
Temperature Sensors (#TMCx-Hx)
Split Core CTs for AC Current (#CTV-X)
Voltage Transmitters (#T-CON-ACT-X)
4-20mA Input Cable (#CABLE-4-20mA)
0 to 2.5 Volt DC Input Cable (#CABLE-2-5-STEREO)
Carbon Dioxide for Telaire Monitor (#CABLE-CO2) |
| External 2.5V Input |
2.5 mm Jack: External Input Ground, Input, Switched 2.5 Volt Output; External Input Ground Connection is not the Same as PC Interface Connection Ground and Not Be Connected to Any External Ground
Input Range: 0 to 2.5 Volts DC
Accuracy: ±10 mV ±1% of Reading
Resolution: 10mV (8-bit)
Out Power: 2.5 Volts DC @ 2mA, Active Only During Measurements |
| Drop Proof |
Up to 5 ft. |
| Time Accuracy |
±1 Minute per Week at 20°C (68°F) |
| Storage Range |
Temperature: -40°C to 75°C (-40°F to 167°F) |
| Battery Life |
Typically 1 Year |
| Battery |
3-Volt CR-2032 Lithium Battery (User Replaceable) |
| Standards Compliance |
CE |
| Weight |
29 grams (1 oz) |
| Dimensions |
61mm x 48mm x 20mm (2.4" x 1.9" x 0.8") |
MicroDAQ.com accepts
Visa, MasterCard and American Express
All prices are in U.S. Dollars.
No U.S. sales tax
|
