0-5 VDC and 4-20mA Input Adapters
| 0-5 VDC Input Adapter
Part Number: S-VIA-CM14
Price: $75.00
4-20 mA Input Adapter
Part Number: S-CIA-CM14
Price: $85.00
Ordering Information
|
Size: 4.5 x 4.8 x 1.6 cm (1.8
x 1.9 x 0.6 in)
Weight: 25g (0.88 oz) |
Input adapters make it easy to use third-party sensors with the
HOBO Weather Station Logger or
the HOBO Micro Station Logger. The
12-bit 4-20 mA Input Adapter interfaces with any sensor providing
a 4-20 mA signal, while the 12-bit Voltage Input Adapter interfaces
with sensors providing 0-5 VDC signals. The adapters provide a
trigger signal for controlling power to external sensors. The
4-20 mA Input Adapter features both a non-switched input and a
battery-saving switched input that extends the life of external
batteries.
Features:
- 12-bit resolution
- Digital filtering improves measurement accuracy with 32 readings/sample,
4-20 mA adapter has 60 Hz noise rejection
- Measurement averaging over logging interval further enhances
accuracy
- Plug-in modular connector for easy interface with HOBO Weather
Station or HOBO Micro Station data loggers
- Screw terminal for connecting to sensors
- Micro Station has room for two adapters and Weather Station
has room for ten (adapters mount inside station enclosure)
- Uses one data input channel
- Cable length: 14 cm (5.5 inch)
Specifications:
12-bit Voltage Input Adapter (S-VIA-CM14)
- Measurement Range: 0-5 V DC
- Measurement Accuracy: ±10 mV ±0.3% of reading
- Resolution: ±1.221 millivolts
- Input impedance: 1 Megohms
- Ground connection: same for adapters and PC interface
- Trigger Open Collector: Maximum sink current: 115 mA; 30 V
max.
- Trigger Source: Voltage: 2.5 V ±2.4%; maximum current:
1 mA
- Trigger Timing:
- Warm-up Time: 10.3 ms ±3% (fixed)
- Measurement Time: 2.4 ms ±3%
- Operating Temperature Range: -40° to 75°C (-40°
to 167°F)
12-bit 4-20mA Input Adapter (S-CIA-CM14)
- Measurement Range: 4-20 mA (measures down to 0 mA to detect
error condition)
- Measurement Accuracy: ±40 µA ±0.3% of
reading
- Resolution: ±4.93 µA
- Input impedance: 124 ohms
- Isolated Input
- Trigger Source: Voltage: 2.5 V ±2.4%; maximum current:
1 mA
- Trigger Timing:
- Warm-up Time: 300 ms ±3% (fixed)
- Measurement Time: 16.6 ms ±3% to filter out 60
Hz noise
- Operating Temperature Range: -40° to 75°C (-40°
to 167°F)
NOTE: Shielded sensor cables are recommended.
Sensor cables for the Micro Station logger should be 0.125” to
0.150” diameter (3.2mm-3.8mm).
Diameter is not critical for the Weather Station logger.
Hobo Weather Station / Micro Station Components and Details
Accessories
Ordering Information
| Description |
Part Number |
Qty 1-4 |
Qty 5+ |
|
| DC Voltage Input Adapter - 12 Bit |
S-VIA-CM14
|
$75.00 |
$72.00 |
 |
| 4-20 mA Input Adapter - 12 Bit |
S-CIA-CM14
|
$85.00 |
$81.00 |
|
NOTE: A HOBO Weather Station Data Logger or Micro Station Data Logger requires BoxCar Pro 4.3 Software
Kit or HOBOware Pro Software Kit for operation of any of the Smart
Sensors.
- You may change quantities from within
your cart.
- If you do not wish to order online call
us toll free at 877-275-9606 between the hours of
9-5 Eastern Standard time.
MicroDAQ.com accepts
Visa, MasterCard and American Express
All prices are in U.S. Dollars.
No U.S. sales tax
|
View Shopping Cart Contents |
Checkout