Data Loggers - Your Source for Temperature Data Loggers, Humidity Data Loggers, Pressure Data Loggers,Relative Humidity Data Loggers,CO data loggers,CO2 data loggers,Rainfall Gauges,Soil Moisture Content Measurement and many other data logging,measurement or recording devices

Pulse Input Adapters


Electronic Switch Version
Part Number:
S-UCA-M006
Price: $69.00

Ordering Information

Pulse Input Adapters for HOBO Data Loggers
Cable length: 6.5m (21 ft)

Pulse Input Adapters for use with the HOBO Weather Station or HOBO Micro Station Data Logger

The Pulse Inputs Adapters are ideal for connecting a wide range of sensors with pulse outputs such as tipping-bucket rain gauges, flow meters, power meters and gas meters. These adapters count the number of pulses per logging interval. Use the adapters with the the HOBO Weather Station Data Logger or  the HOBO Micro Station Data Logger.

Electronic Switch Version ( S-UCA-M006 )
  • Compatibility: Electronic switch closures, such as FET or open-collector outputs, or CMOS-level logic signals
  • Maximum input frequency: 120 Hz (120 pulses per second)
  • Lockout time: 45 microseconds ±10%
  • Preferred pulse polarity*: Active low
Contact Closure Version ( S-UCB-M006 )

Discontinued - Replaced by 16-bit S-UCD-M006 Input Pulse Adapter

  • Compatibility: contact closures, such as tipping-bucket rain gauges or reed switches
  • Maximum input frequency: 2 Hz (2 pulses per second)
  • Lockout time (for switch debounce): 327 milliseconds ±10%
  • Preferred switch type*: normally-open
Measurement Range
  • Measurement Range: 0-4093 counts per logging interval (data must be exported for conversion to other units)
  • Minimum Pulse Width: 1 ms
  • Maximum input voltage: 3.6V
  • Minimum input voltage: -0.3V
  • Logic levels: low =0.6V; high =2.7V
  • Edge detection: falling edge
  • Input/Output impedance: 100 kilohms
  • User connection: 2-wire input (24 AWG wire; 2 wire nuts included)
  • Cable length: 6.5m (21 ft)
  • Weight: 310 g (11 oz)
  • Number of data channels used: 1

* Pulses of opposite polarity can be used, but battery usage rate will be higher.


Hobo Weather Station / Micro Station Components and Details

Accessories

Ordering Information
On-Line Ordering Information    |        View Shopping Cart Contents    |    Checkout
Description Part Number Qty 1-4 Qty 5+  
12-Bit Pulse Input Adapter - Electronic Switch Version S-UCA-M006
$69.00 $66.00
Data Loggers
HOBO Micro Station Data Logger H21-002
$199.00 $189.00
HOBO Weather Station Data Logger H21-001
$420.00 $400.00

NOTE: A HOBO Weather Station Data Logger or Micro Station Data Logger requires BoxCar Pro 4.3 Software Kit or HOBOware Pro Software Kit for operation of any of the Smart Sensors.

  • You may change quantities from within your cart.
  • If you do not wish to order online call us toll free at 877-275-9606 between the hours of 9-5 Eastern Standard time.

NOTE: A HOBO Weather Station Data Logger or Micro Station Data Logger and a BoxCar Pro4.3 software starter kit are required for operation of any of the Smart Sensors.

 

MicroDAQ.com accepts
Visa, MasterCard and American Express
Buy Data Loggers from Microdaq.com with Visa, MasterCard and American Express

All prices are in U.S. Dollars.
No U.S. sales tax