HOBO Event Data Logger
Onset Event Data Logger for Tipping Rain Gauges and Industrial Counting
 The HOBO Event Logger records the opening of a closed
circuit and is used primarily for tipping rain collectors and industrial
counting application. The event logger will record 8,000 events and store
the time and date of each one. Only one time per event is stored to
minimize memory usage for applications where the event duration is not
needed.
Included with Event Data Logger
>> Weatherproof Case
>> 6 foot Cable
Required Software
>> BoxCar Software Kit
NOTE: Large Quantity Discounts Are Availabe!
Due to New CE Requirements, this product is No Longer Available for EU Countries, Check out the UA-003 Pendant Event Data Logger or the U11-001 State Event Data Logger As An Alternative.
Features Specifications Applications Application Note
| Description |
Part Number |
Qty 1-9 |
Qty 10+ |
|
| HOBO Event Logger |
H07-002-04
|
$149.00 |
$140.00 |
 |
| Software Starter Kits - 1 Required |
| BoxCar Pro 4.3 Software and Serial Cable Kit |
BCP4.3-ON
|
$125.00 |
$118.00 |
|
| BoxCar 3.7 Software and Serial Cable Kit |
BC3.7
|
$55.00 |
$53.00 |
|
| Optional Accessories |
| HOBO Shuttle Data Transporter |
H09-003-08
|
$230.00 |
$207.00 |
|
| Extra/Replacement Batteries (pack of 5) - CR2032 Lithium Batteries |
HRB-TEMP-5
|
$10.00 |
$8.00 |
|
| Extra Serial Interface Cable |
Cable-PC-3.5
|
$10.00 |
$9.00 |
|
| USB Serial Adapter |
CABLE-USB232
|
$39.00 |
$35.00 |
|
| Keyspan USB 4-Port Serial Adapter |
USA-49WG
|
$149.00 |
call |
|
| PG-16 Fitting with 4-Hole Insert (Requires 85-ORING-12) |
85-GROMMET
|
$3.00 |
call |
|
| O-Ring for 85-GROMMET |
85-ORING-12
|
$2.00 |
call |
|
| Replacement Case for Event Logger |
EVENT-CASE
|
$23.00 |
call |
|
| 6 foot M/F RS232 extension cable, DB9 (for providing an extension between interface cable and PC serial port) (Limited Quanitity - 5 Available) |
CABLE-DB9-6--U--
|
$6.00
$4.00 |
call |
|
Event Data Logger Features
- Record and Log Momentary Contact-Closure Events
- Store up to 8,000 Events Without Downloading Data
- Compatible with the optional HOBO
Shuttle for Data Download and Logger Relaunch in the Field
- Nonvolatile EEPROM memory retains data even if the battery fails
- Blinking LED light inside case confirms operation
- Requires BoxCar Software Kit for Logger Setup and Data Download
Event Data Logger Specifications
| Event Type |
Relay Contact Openings |
| Minimum Event Interval |
1/2 Second |
| Operating Range |
Temperature: -20°C to 70°C (-4°F to 158°F)
Humidity: 0 to 95% RH, non-condensing |
| Time Accuracy |
±100 ppm at 20°C |
| Data Storage Capacity |
8,000 Events |
| Storage Range |
Temperature: -40°C to 75°C (-40°F to 167°F)
Humidity: 0 to 95% RH, non-condensing |
| Case |
Weatherproof Enclosure (Avoid placing in Direct Sunlight) |
| Battery |
User Replaceable CR2032 Type Lithium Battery |
| Battery Life |
1 Year Typical Use |
| Standards Compliance |
CE |
| Weight |
94 grams (3.3 oz) |
| Dimensions |
108mm x 89mm x 44mm (4.25" x 3.53" x 1.75") |
Event Data Logger Applications
- Industrial counting
- Rain gauges / collectors
- Turnstiles
- Fixed-cycle machine usage
Difference Between the Hobo State Logger and the Hobo Event Logger
The HOBO Event logger records the opening of the contacts only. It
does not record the closing. The HOBO
State Logger records changes in the state - both
the opening and closing of the switch, (door open/close,
light on/off, etc).
Application
Note: Differences Between State, Event and Pulse Data
Loggers
 HOBO
Event and Rainfall Logging
The HOBO Event data logger can connect to standard tipping-bucket
rain collectors to determine rainfall rates, times and duration.
The HOBO Event Data Logger eliminates the need to manually
read rain gauges, saving time and insuring that critical readings
are not missed. Use it to upgrade existing tipping-bucket systems
by replacing counting-type displays. We also offer a
tipping-bucket rain gauge that is packaged with the Hobo
Event.
Features for rainfall measurement
- Easily connects to 2-wire output or 2-screw terminals
in the collector
- Compact, weatherproof case can be mounted inside
or outside the rain collector (avoid direct sunlight)
- 8,000-tip capacity for up to 80" of rainfall
between readouts with 0.01" tipping-bucket
collectors
- User-entered resolution to match with rain-gauge
collector
- Programmable lockout time to filter out false counts
due to tipping-bucket bounce
- Tip counts logged with time information to enable
rainfall intensity determination
MicroDAQ.com accepts
Visa, MasterCard and American Express
All prices are in U.S. Dollars.
No U.S. sales tax
|
