Data Loggers - Your Source for Temperature Data Loggers, Humidity Data Loggers, Pressure Data Loggers,Relative Humidity Data Loggers,CO data loggers,CO2 data loggers,Rainfall Gauges,Soil Moisture Content Measurement and many other data logging,measurement or recording devices
(603) 746-5524
Mon. - Fri. 8:30AM - 5:00PM EST

Minomess 130 Water Flow Meter with Reed Switch

Water Flow Meter for Measuring Hot and Cold Flow Rates through 3/4" Pipes

Minomess 130 Water Flow Meter Sensor with Lead-Free Brass Couplings
Price: $199.00
Part #: MINOL-130-NL-BC

View Accessories

• Measure Cold and Hot Water Flow Rates: 0.25 to 22.0 gpm
• Operating Range: 4.4°C to 82.2°C (40°F to 180°F)
• Dry Contact Reed Switch with 100mA Max Contact Rating
• For use with 3/4" Pipes
• Compatible with 1/2" and 1.0" Pipes (Step Ups & Step Downs (Sold Separately)
New! Lead Free Brass Meets the 2014 "Reduction of Lead in Drinking Water" Act Requirements
• 8 Digit Odometer, Meter Register May be Turned 360° for Easier Readings
• Cost-effective, Compact Size, UL Listed and ANSI/SNF61 Certified
• Meter Couplings are Required for Water Meter Installations (Sold Separately)
• Compatible with Onset HOBO Data Loggers with an Analog Input Using a Pulse Input Adapter

  • Installation Notes
  • Specifications
  • Documentation
  • Applications
  • Accessories

Water Flow Meter Installation Notes

  • Local Plumbing Codes and Regulations Should be Followed for Water Meter Use and Installation
  • For Indoor Installation Only
  • A 1 1/2" Length of Straight Pipe "Settling Path" is Required Just Upstream of the Water Meter
  • All Sediment Should be Flushed Out through a Spacer Pipe Before Meter Installation
  • Install the Metere in an Easily Accessible Area After the Shut Off Valve
  • The Flow Indicator Arrow Stamped on the Water Meter Body Should be Installed in the Direction of Water Flow
  • Do Not Carry or Support the Meter by the Cable or Wire

Minomess 130 Water Flow Meter Specifications

Measurement Range .25 to 22.0 gpm
Accuracy Minimum Flow: 97%-103% (0.25-1 gpm)
Normal Flow: 98.5%-101.5% (0.25-1 gpm)
Safe Maximum Operating Capacity: 22.02 gpm
Connection Size 5/8" x 3/4" ID
ANSI/ASME B1.20.1-1983; 1-11.5 SNPSM Thread;
Operating Range Water Temperature: 40° to 180°F
Meter Reading Maximum: 99,999,999 US Gallons
Resolution Digital Register: 1 US gal
Indicator Dial: 0.05 US gal
Output Pulse
Note: Pulse Input Adapter (#S-UCD-M006) is Required with Onset HOBO Data Loggers
Body Material Brass (Lead Free)
Cable Length 59 Inches
Pressure Drop < 14.5 PSI @ 22 gpm (typical <8.70 PSI)
< 3.625 PSI @ 11 gpm
Reed Switch Type: Dry Contact
Contact Rating: 100 mA Maximum
Resolution: 1 Contact Closure per 1 US Gallon
Duty Cycle: 0.7 gal. open / 0.3 gal. Closed (typical)
Dimensions 130.05mm x 63.5mm x 80mm (5.12" x 2.5" x 3.15")
Weight 21.6 oz. (1.35 lbs.)
Certifications ANSI/NSF61 Certified, UL Listed

Flow Meter Documentation

Instructions on Connecting the Water Flow Meter to the U30 Remote Monitors. View PDF.

Minomess 130 Water Flow Meter Applications

  • Sub-Metering Apartments, Mobile Homes, Commercial Buildings, Condomium Complexes, Manufacturing Facilities and Assisted Living Communities
Pulse Input Adapters - Required with Onset HOBO Data Loggers with an Analog Input
Contact Closure Pulse Input Adapter Contact Closure Pulse Input Adapter
>> Connects Sensors with Pulse Outputs to Loggers with Smart Sensor Inputs
>> Maximum Input Frequency of 2Hz (2 Pulses Per Second) with Switch Type of Normally-Open
>> 16-Bit Resolution
>> Compatible with Contact Closures, Such as Tipping Bucket Rain Gauges or Reed Switches
>> Cable Length: 1 Meter
Price: $74.00
Part #: S-UCD-M001

Contact Closure Pulse Input Adapter Contact Closure Pulse Input Adapter
>> Connects Sensors with Pulse Outputs to Loggers with Smart Sensor Inputs
>> Maximum Input Frequency of 2Hz (2 Pulses Per Second) with Switch Type of Normally-Open
>> 16-Bit Resolution
>> Compatible with Contact Closures, Such as Tipping Bucket Rain Gauges or Reed Switches
>> Cable Length: 6 Meters
Price: $79.00
Part #: S-UCD-M006


Warning: mysql_close(): 9 is not a valid MySQL-Link resource in /usr/www/users/daq/microdaq.com/includes/subfooter.inc on line 1