HOBO USB Energy Monitoring System
Onset 15-Channel Energy Monitoring System
A rugged data logging system that can be easily customized, configured and adapted to a wide variety of applications.
>> Rugged Double-Weatherproof, Tamper-Proof Enclosure
>> Attach up to 15 Smart Sensors
>> Easy Set-up with Plug-and-Play Sensors
>> Fast Data Offload with USB Cable
>> Optional Analog Inputs with Sensor Excitation
>> Includes Relay for User-Defined Alarm Conditions
>> Mounting Kit, Grounding Wire Cable Entry and Sealing Kit
>> Compatible with Most Onset Smart Sensors
>> Optional Data Shuttle Available for Collecting Measured Readings in Remote Area
The U30 USB System Requires:
>> U30 Base Unit
>> Power Adapter or Solar Panels
>> Compatible Smart Sensors (Minimum 1)
>> HOBOWare Pro Software
All U30s are Built to Order - 7 Day Lead Time is Required.
- Specifications
- Documentation
- Purchase
U30 USB Energy Monitoring System Specifications
| Data Channels |
Max. 15 Channels (Some Smart Sensors use more than 1 Channel) |
| Data Storage Capacity |
512K Maximum Storage (Number of Samples Dependant on External Sensors) |
| Sampling Rate |
1 Second to 18 Hours |
| Smart Sensor Compatiblility |
Compatible with Onset Smart Sensors, Except S-BPA, S-TMA and S-THA |
| Logging Modes |
Immediate, Timed Delay, or Push-Button Start Options |
| Memory Modes |
Stop When Full; Wrap When Full |
| Sensor Inputs |
5 Standard - Option to Expand to 10 |
| Alarm Output Relay |
Activated, Deactivated or Pulsed on User-Defined Sensor Alarms (Relay Configured as Normally Open or Normally Closed - Rated for 30 Volts and 1 Amp Max.) |
| Time Accuracy |
0 to 2 Seconds for first data point and ±5 Seconds per Week at 25°C (77°F) |
| Communications |
Full Speed USB via USB mini-B Connector |
| Expansion Slot |
One Expansion Slot (Factory-Installed) |
| Enclosure / Materials |
Outer Enclosure: ABS Blend with SS Hinge Pins, Bronze Inserts
Inner Enclosure: Polycarbonate with Bronze Inserts
U-Bolts: Steel with Zinc Dichtomate Finish
Gaskets: Silicone Rubber
Cable Entry Channel: EPDM Rubber
Cable Entry Bars: Alum. w/ ABS Plastic Thumb Screws |
| Enclosure Access |
Hinged Door Secured by 2 Latches witEyelets for Securing with User-Supplied Padlocks |
| Mounting |
3.8 cm (1.5") Mast or Wall Mount |
| Sensor Network Cable Length |
100 Meters (328 ft) Maximum |
| Operating Range |
Temperature: -20°C to 40°C (-4°F to 104°F) |
| Battery Life |
Rechargeable Service Life: 3 - 5 Years Typical Use
(Dependant Upon Environment and Operating Range) |
| Battery |
4 Volt, 4.5AHr or 10AHr, Rechargeable Sealed Lead-Acid |
| External Power |
Required with 4 Options to Choose from:
AC-U30 Power Adapter Solar-1.2W Solar-3W Solar-6W |
| Standards Compliance |
Weatherproof Enclosure. Tested to NEMA 6 |
| Weight |
2 kg (4 lbs 10 oz) |
| Dimensions |
17.8cm x 11.7cm x 19.3cm (7.0" x 4.6" x 7.60") |
| Optional Analog Sensor Port Specifications |
| Input Channels |
(2) Single-Ended |
| Field Wiring |
2- or 3-wire via Screw Terminals on Detachable Connector |
| Input Range |
User-Configurable: 0 to 20 mA DC, 0 to 20 VDC (Suitable for 2.5, 5, and 10 V Sensors) |
| Input Voltage |
0 to 24 VDC |
| Input Current |
0 to 24 mA DC |
| Current Source Impedance |
Minimum: > 20 KΩ |
| Accuracy |
±0.25% of FSR from 50mV to FSV |
| Excitation Power |
Switched 12 VDC, up to 50 mA; User-Selectable Warm-up from 5 msec to 2 Minutes |
Documentation for the U30 Ethernet Communications Data Logger
- Accessories
(Optional)
- Power Option
(1 Required)
- Compatible Sensors
(Minimum 1 Required)
- Software
(Required)
Optional Accessories for the U30 USB Energy Monitoring System
 |
HOBO U30 Shuttle
>> Convenient In-Field Data Offload and Relaunch of Data Logger
>> Display Shows Current Readings, Battery Level, Sensor Readings and Logger Status
>> User-Replaceable AA Batteries
|
Price: $260.00 Part #: U-DT-2
|
 |
1 to 6 Adapter for Smart Sensors
>> Connect up to 6 Smart Sensors in a Water-Resistant Enclosure
>> Dimensions: 17cm x 12.0cm x 5.7cm (6.7" x 4.75" x 2.2")
>> Weight: 322 g (11.3 oz)
|
Price: $95.00 Part #: S-ADAPT-6
|
 |
1 to 2 Sensor Communication Adapter
>> Consumer-Grade UL-Listed Plastic 2 to 1 6-pin Adapter
|
Price: $6.00 Part #: S-ADAPT
|
 |
Sensor Input Adapter Kit
>> Increase the Number of Sensor Inputs from 5 to 10
>> Includes Weatherproof Cable Entry Points for 5 Additional Sensors, plus 2 Cables
|
Price: $39.00 Part #: S-ADAPT-X5-10
|
 |
Complete 3-Meter Tripod Kit
>> All Parts for A 3 Meter Tripod Configuration
>> Accommodates Moderately Sloping Terrain
>> Includes Tripod (#M-TPA), Grounding Kit (#M-GKA), Guy Wire Kit (#M-GWA), 1/2" Stake Kit (#M-SKA) for Guy Wires and Tripod, And Mast Level(#M-MLA)
>> Note: 30 lbs Shipping for This Item.
|
Price: $275.00 Part #: M-TPA-KIT
|
 |
3m Tripod Tower with Mast
>> 3 Meter Tripod With mast for Mounting Logger and Sensors
>> Can Be Placed on Any Slope Less than 13 Degrees
>> Mast Diameter: 4.1 cm (1.63")
>> Note: 28 lbs Shipping for This Item.
|
| Quantity | Price Each | | 1 - 4 | $150.00 | | 5+ | $143.00 | Part #: M-TPA
|
 |
2m Tripod Tower with Mast
>> 2 Meter Tripod with mast for Mounting Logger and Sensors
>> NOT Adjustable for Sloping Surfaces
|
| Quantity | Price Each | | 1 - 4 | $55.00 | | 5+ | $53.00 | Part #: M-TPB
|
 |
Complete 2-Meter Tripod Kit
>> All Parts for a 2 Meter Tripod Configuration
>> Accommodates Moderately Sloping Terrain
>> Includes Tripod (#M-TPB), Grounding Kit (#M-GKA), Guy Wire Kit (#M-GWA), 1/2" Stake Kit (#M-SKA) for Guy Wires, 1/4" Stake Kit (#M-SKB) and Mast Level(#M-MLA)
>> Note: 25 lbs Shipping for This Item.
|
Price: $190.00 Part #: M-TPB-KIT
|
 |
NDVI Light Sensor Bracket
>> Used in NDVI Monitoring Systems
>> Mounts 2 PAR Sensors and 2 Solar Radiation Sensors on the Light Bracket to Get NVDI Measurements
|
Price: $18.00 Part #: M-NDVI
|
The U30 USB Energy Monitoring System uses a sealed lead-acid Battery that can be recharged via a Solor Panel or AC Adpater.
 |
AC Power Adapter
>> 120 Volts, 60 Hz Linear Power Supply
>> Output: 6 Volts DC, 2 Amps
>> Compatible with U30 Remote Monitoring Data Loggers
|
Price: $35.00 Part #: AC-U30
|
 |
1.2 Watt Solar Panel
>> 1.2 Watt, 6 Volt Solar Panel
>> Best in Sunny Locations and with Low Data Transfer Requirements
>> Dimensions: 15.2cm x 11.7cm (6.0" x 4.6")
|
Price: $85.00 Part #: SOLAR-1.2W
|
 |
3.0 Watt Solar Panel
>> 3.0 Watt, 6 Volt Solar Panel
>> Best in Moderately Cloudy Locations, Higher Latitudes and with Medium Data Transfer Requirements
>> Dimensions: 14.2cm x 24.1cm (5.6" x 9.5")
|
Price: $129.00 Part #: SOLAR-3W
|
 |
6.0 Watt Solar Panel
>> 3.0 Watt, 6 Volt Solar Panel
>> Best in Very Cloudy Locations, Higher Latitudes and with High Data Transfer Requirements
>> Dimensions: 24.1cm x 24.1cm (9.5" x 9.5")
|
Price: $149.00 Part #: SOLAR-6W
|
Click on the Measurement below for Available Sensors and Required Options.
 |
Compressed Air Flowmeter for 1.0" Steel Pipe
>> Measurement Range: 1 to 80 SCFM
>> LCD Display Shows Flow Directly with No Setup
>> MilliAmp and Pulse Output
>> Includes 110 Volt Power Adapter
|
Price: $495.00 Part #: T-CDI-5200-10S
|
 |
Compressed Air Flowmeter for 2.0" Steel Pipe
>> Measurement Range: 3 to 350 SCFM with Extended Range up to 600 SCFM
>> LCD Display Shows Flow Directly with No Setup
>> MilliAmp and Pulse Output
>> Includes 110 Volt Power Adapter
|
Price: $629.00 Part #: T-CDI-5400-20S
|
 |
Veris Kilowatt Hour Transducer 1-Phase, 330 Amp
>> Self-Contained 0 to 200 AMP Current Transducer for Single-Phase Power Monitoring
>> 1 Split Core AC Current Sensor and 2 Voltage Leads
>> Outputs a Signal Proportional to Killowatts of Power (Consumption)
>> Accepts Input Primary Coltage of 208 to 480 Volts AC rms
>> Requires Pulse Input Adapter (#S-UCC-M001 or #S-UCC-M006)
|
Price: $642.00 Part #: T-VER-8051-300
|
 |
Veris Kilowatt Hour Transducer 3-Phase, 800 Amp
>> Self-Contained 0 to 800 AMP Current Transducer for 3-Phase AC Loads
>> 3 Split Core AC Current Sensors and 3 Voltage Leads
>> Outputs a Signal Proportional to Killowatts of Power (Demand)
>> Accepts Input Primary Coltage of 208 to 480 Volts AC rms
>> Requires Pulse Input Adapter (#S-UCC-M001 or #S-UCC-M006)
|
Price: $849.00 Part #: T-VER-8053-800
|
 |
WattNode 208/240 VAC 3-Phase Delta kWh Transducer
>> Line to Neutral: 120 Volts AC
>> Line to Line: 208-240 Volts AC
>> Phases: 3
>> Wires: 3
|
Price: $244.00 Part #: WNB-3D-240-P
|
 |
WattNode 480 VAC 3-Phase Delta kWh Transducer
>> Line to Neutral: 277 Volts AC
>> Line to Line: 480 Volts AC
>> Phases: 3
>> Wires: 3
|
Price: $244.00 Part #: WNB-3D-480-P
|
 |
WattNode 208/240 VAC Wye kWh Transducer
>> Line to Neutral: 120 Volts AC
>> Line to Line: 208-240 Volts AC
>> Phases: 3
>> Wires: 4
|
Price: $198.00 Part #: WNB-3Y-208-P
|
| Pulse Input Adapter - Required |
 |
Electronic Switch Pulse Input Adapter w/ 1 Meter Cable
>> Connects Sensors with Pulse Outputs to Loggers with Smart Sensor Inputs
>> Maximum Input Frequency of 120Hz (120 Pulses Per Second)
>> 16-Bit Resolution
>> Compatible with Electronic Switch Closures with FET or Open-Collector Outputs or CMOS-Level Logic Signals
>> Cable Length: 1 Meter
|
Price: $70.00 Part #: S-UCC-M001
|
 |
Electronic Switch Pulse Input Adapter w/ 6 Meter Cable
>> Connects Sensors with Pulse Outputs to Loggers with Smart Sensor Inputs
>> Maximum Input Frequency of 120Hz (120 Pulses Per Second)
>> 16-Bit Resolution
>> Compatible with Electronic Switch Closures with FET or Open-Collector Outputs or CMOS-Level Logic Signals
>> Cable Length: 6 Meters
|
Price: $75.00 Part #: S-UCC-M006
|
| Current Transformer - Required with Wattnode |
 |
Split Core Current Transformer w/ 0.75" ID
>> Inside Diameter: 0.75"
>> available Rated Amps: 5, 15, 30, 70, 100, 150
|
Price: $42.00 Part #: CTS-0750
|
 |
Split Core Current Transformer w/ 1.25" ID
>> Inside Diameter: 1.25"
>> Available Rated Amps: 70, 100, 150, 200, 250, 300, 400, 600
|
Price: $46.00 Part #: CTS-1250
|
 |
Split Core Current Transformer w/ 2.00" ID
>> Inside Diameter: 2.00"
>> Available Rated Amps: 400, 600, 800, 1000, 1200, 1500
|
Price: $66.00 Part #: CTS-2000
|
 |
Veris 480 V, 100 AMP Kilowatt Transducer
>> Self-Contained 0 to 100 AMP Current Transducer for 1 or 3 Phase Power Monitoring
>> Incorporates 3 Spit Core AC Current Sensors and 3 Voltage Leads
>> Outputs a Signal Proportional to Killowatts of Power (Demand)
>> Accepts an input Primary Voltage of 480 Volts AC rms
>> Includes 3 100 AMP Split-Core CTs
|
Price: $825.00 Part #: T-VER-8044-100
|
 |
0-5 AMP Split-Core AC Current Transformer
>> 22 AWG 8 ft Twisted Pair Leads
>> Measurement Range: 0.5 to 5 Amps AC
>> Accuracy: ±1% (from 30% to 130% of Rated Current)
>> Voltage Rating: 600 Volts AC
>> Output Signal: 0.333 Volts at Rated Current
>> Opening: 0.75"
|
Price: $55.00 Part #: T-MAG-SCT-005
|
 |
0-20 AMP Split-Core AC Current Transformer
>> 22 AWG 8 ft Twisted Pair Leads
>> Measurement Range: 0 to 20 Amps AC
>> Accuracy: ±1% (from 30% to 130% of Rated Current)
>> Voltage Rating: 600 Volts AC
>> Output Signal: 0.333 Volts at Rated Current
>> Opening: 0.75"
|
Price: $55.00 Part #: T-MAG-SCT-020
|
 |
0 - 50 AMP Split Core AC Current Transformer
>> 22 AWG 8 ft Twisted Pair Leads
>> Measurement Range: 0 to 50 Amps AC
>> Accuracy: ±1% (from 30% to 130% of Rated Current)
>> Voltage Rating: 600 Volts AC
>> Output Signal: 0.333 Volts at Rated Current
>> Opening: 0.75"
|
Price: $55.00 Part #: T-MAG-SCT-050
|
 |
0 - 100 AMP Split Core AC Current Transformer
>> 22 AWG 8 ft Twisted Pair Leads
>> Measurement Range: 0 to 100 Amps AC
>> Accuracy: ±1% (from 30% to 130% of Rated Current)
>> Voltage Rating: 600 Volts AC
>> Output Signal: 0.333 Volts at Rated Current
>> Opening: 1.25"
|
Price: $55.00 Part #: T-MAG-SCT-100
|
 |
0 - 200 AMP Split Core AC Current Transformer
>> 22 AWG 8 ft Twisted Pair Leads
>> Measurement Range: 0 to 200 Amps AC
>> Accuracy: ±1% (from 30% to 130% of Rated Current)
>> Voltage Rating: 600 Volts AC
>> Output Signal: 0.333 Volts at Rated Current
>> Opening: 1.25"
|
Price: $55.00 Part #: T-MAG-SCT-200
|
 |
0 - 600 AMP Split Core AC Current Transformer
>> 22 AWG 8 ft Twisted Pair Leads
>> Measurement Range: 0 to 600 Amps AC
>> Accuracy: ±1% (from 30% to 130% of Rated Current)
>> Voltage Rating: 600 Volts AC
>> Output Signal: 0.333 Volts at Rated Current
>> Opening: 2.00"
|
Price: $65.00 Part #: T-MAG-SCT-600
|
| Required |
 |
FlexSmart TRMS Module w/modular plug
>> 2-Channel True RMS Current/Voltage Module
>> Input Range: 5mV to 512mV (Compatible with 333mV FS Output Sensors
>> Resolution: 12-Bit
>> 2-Wire with Screw Terminal Connection
|
Price: $105.00 Part #: S-FS-TRMSA-D
|
 |
150 Volt AC Potential Transformer
>> Accurate Measurement of Sinusoidal and Non-Sinusoidal Waveforms
>> Measurement Range: 0 to 150 Volts AC
>> Accuracy: ±1% (10% to 130% of Rated Voltage)
>> Output Signal: 0.333 Volts at Rated Input Voltage
|
Price: $79.00 Part #: T-MAG-SPT-150
|
 |
300 Volt AC Potential Transformer
>> Accurate Measurement of Sinusoidal and Non-Sinusoidal Waveforms
>> Measurement Range: 0 to 1300 Volts AC
>> Accuracy: ±1% (10% to 130% of Rated Voltage)
>> Output Signal: 0.333 Volts at Rated Input Voltage
|
Price: $79.00 Part #: T-MAG-SPT-300
|
 |
600 Volt AC Potential Transformer
>> Accurate Measurement of Sinusoidal and Non-Sinusoidal Waveforms
>> Measurement Range: 0 to 600 Volts AC
>> Accuracy: ±1% (10% to 130% of Rated Voltage)
>> Output Signal: 0.333 Volts at Rated Input Voltage
|
Price: $79.00 Part #: T-MAG-SPT-600
|
| Required |
 |
FlexSmart TRMS Module w/modular plug
>> 2-Channel True RMS Current/Voltage Module
>> Input Range: 5mV to 512mV (Compatible with 333mV FS Output Sensors
>> Resolution: 12-Bit
>> 2-Wire with Screw Terminal Connection
|
Price: $105.00 Part #: S-FS-TRMSA-D
|
 |
Split Core Bi-Directional Current Transducer
>> Measures up to 200 Amps of DC Current in Both Flow Directions
>> Status LED for Proper Installation
>> Output: 4 to 20 mA (Bi-Polar)
>> Response Time: 2 Seconds
|
Price: $229.00 Part #: T-VER-971BP-200
|
 |
Split Core DC Current Transformer
>> 0 to 50/100/200 Amp Measurement Ranges
>> mA and Volts DC Outputs
>> Status LED Indicators Ensure Proper Wiring
>> 2 Second Response Time
|
Price: $205.00 Part #: T-VER-H970-200
|
 |
Split Core DC Current Transformer
>> 0 to 50/100/200 Amp Measurement Ranges
>> mA and Volts DC Outputs
>> Status LED Indicators Ensure Proper Wiring
>> 2 Second Response Time
|
Price: $205.00 Part #: T-VER-H970-200
|
 |
12 Bit DC Voltage Input Adapter
>> Interfaces with Sensors Providing 0 to 5 Volts DC Signals
|
| Quantity | Price Each | | 1 - 4 | $75.00 | | 5+ | $72.00 | Part #: S-VIA-CM14
|
| Accessories - Required |
 |
CO2 and Temperature Output Cable
>> CO2 and Temperature Output Cable with 2 Leads
|
Price: $24.00 Part #: 2070
|
| Optional Accessories |
 |
Vaisala Duct-Mount RH/Temp Transmitter
>> Mounts to Air Ducts
>> Measurement Range: 10 to 90% (RH); -10°C to 60°C (14°F to 140°F)
|
Price: $299.00 Part #: T-VAI-HMD-40Y
|
 |
Veris 480 V, 100 AMP Kilowatt Transducer
>> Self-Contained 0 to 100 AMP Current Transducer for 1 or 3 Phase Power Monitoring
>> Incorporates 3 Spit Core AC Current Sensors and 3 Voltage Leads
>> Outputs a Signal Proportional to Killowatts of Power (Demand)
>> Accepts an input Primary Voltage of 480 Volts AC rms
>> Includes 3 100 AMP Split-Core CTs
|
Price: $825.00 Part #: T-VER-8044-100
|
 |
4-20 mA Input Adapter
>> Interfaces with any Sensor Providing a 4-20mA Signal
>> Features a non-switched Input and Battery-Saving Switched Input for Better Battery Life
>> Provides a Trigger Signal for Controlling Power to Attached External Sensor
>> 12-Bit Resolution
|
| Quantity | Price Each | | 1 - 4 | $85.00 | | 5+ | $81.00 | Part #: S-CIA-CM14
|
 |
Differential Air Pressure Transducer
>> Measurement Range: 0 to 10" WC (Field Selectable)
>> Unidirectional or Bi-Directional Modes
>> Push Button and Digital Input Terminal to Zero the Output
>> Highly Accurate, Microprocessor Profiled Sensors
|
Price: $195.00 Part #: T-VER-PXU-X
|
 |
Differential Air Pressure Transducer w/ Display
>> Measurement Range: 0 to 10" WC (Field Selectable)
>> Unidirectional or Bi-Directional Modes
>> Push Button and Digital Input Terminal to Zero the Output
>> Highly Accurate, Microprocessor Profiled Sensors
|
Price: $220.00 Part #: T-VER-PXU-L
|
Note: During Configuration of a U30 Unit, the "2 Channel Analog Port" Option is Required When Using an Ashcroft Gauge Pressure Sensor.
 |
Ashcroft Gauge Pressure Sensor
>> Precision Pressure Measurements in Compressed Air Systems, Water or Oter Gases and Fluids
>> Measurement Range: 100 psig
>> Accuracy: ±1% to 1.5% FS
>> Connection: 1/4" NPT 305 Stainless Steel
>> Output Signal: 0 to Volts DC, 3 Wire
|
Price: $190.00 Part #: T-ASH-G2-100
|
 |
Ashcroft Gauge Pressure Sensor
>> Precision Pressure Measurements in Compressed Air Systems, Water or Oter Gases and Fluids
>> Measurement Range: 200 psig
>> Accuracy: ±1% to 1.5% FS
>> Connection: 1/4" NPT 305 Stainless Steel
>> Output Signal: 0 to Volts DC, 3 Wire
|
Price: $190.00 Part #: T-ASH-G2-200
|
 |
Ashcroft Gauge Pressure Sensor
>> Precision Pressure Measurements in Compressed Air Systems, Water or Oter Gases and Fluids
>> Measurement Range: 500 psig
>> Accuracy: ±1% to 1.5% FS
>> Connection: 1/4" NPT 305 Stainless Steel
>> Output Signal: 0 to Volts DC, 3 Wire
|
Price: $190.00 Part #: T-ASH-G2-500
|
 |
Barometric Pressure Sensor with 50cm Cable
>> Measures Barometric Pressure Over a Wide Range
>> 12-Bit Resolution, Weather-proof Housing, Outdoor Rated
>> Measurement Range: 660 mb to 1070 mb (19.47 to 31.55 inHg)
>> Accuracy: ?3.0 mbar (0.088 in Hg)
>> Drift: 1.0 mbar (0.03 in Hg) per year
>> Mast or Flat Surface Mounting with Zip Ties Included
|
Price: $249.00 Part #: S-BPB-CM50
|
| Optional Accessories |
 |
Weatherproof Connection Housing for Smart Sensors
>> 6" Long PVC Weatherproof Connection Housing
>> Includes Silicone Lubricant
|
| Quantity | Price Each | | 1 - 4 | $21.00 | | 5+ | $20.00 | Part #: S-EXT-CASE
|
 |
2 Meter Smart Sensor Extension Cable
>> 2 Meter Male to Male Extension Cable
>> Includes Female to Female Adaptor
|
Price: $20.00 Part #: S-EXT-M002
|
 |
5 Meter Smart Sensor Extension Cable
>> 5 Meter Male to Male Extension Cable
>> Includes Female to Female Adaptor
|
| Quantity | Price Each | | 1 - 4 | $25.00 | | 5+ | $24.00 | Part #: S-EXT-M005
|
 |
10 Meter Smart Sensor Extension Cable
>> 10 Meter Male to Male Extension Cable
>> Includes Female to Female Adaptor
|
| Quantity | Price Each | | 1 - 4 | $30.00 | | 5+ | $29.00 | Part #: S-EXT-M010
|
 |
25 Meter Smart Sensor Extension Cable
>> 25 Meter Male to Male Extension Cable
>> Includes Female to Female Adaptor
|
| Quantity | Price Each | | 1 - 4 | $45.00 | | 5+ | $38.00 | Part #: S-EXT-M025
|
 |
12-Bit Temperature RH Smart Sensor w/ 2 Meter Cable
>> 2 Channel Sensor Measuring Temperature and Humidity
>> Automatically Communicates Configuration Data to the attached logger (Sold Separately)
>> Measurement Range: -40°C to 75°C at 0 to 100% RH
>> Accuracy: 0.2°C (temperature) and ±2.5% (RH)
>> Weatherproof Environmental Rating
>> Cable Length: 2 Meters
|
| Quantity | Price Each | | 1 - 4 | $189.00 | | 5+ | $180.00 | Part #: S-THB-M002
|
 |
12-Bit Temperature RH Smart Sensor w/ 8 Meter Cable
>> 2 Channel Sensor Measuring Temperature and Humidity
>> Automatically Communicates Configuration Data to the attached logger (Sold Separately)
>> Measurement Range: -40°C to 75°C at 0 to 100% RH
>> Accuracy: 0.2°C (temperature) and ±2.5% (RH)
>> Weatherproof Environmental Rating
>> Cable Length: 8 Meters
|
| Quantity | Price Each | | 1 - 4 | $195.00 | | 5+ | $186.00 | Part #: S-THB-M008
|
 |
Vaisala Duct-Mount RH/Temp Transmitter
>> Mounts to Air Ducts
>> Measurement Range: 10 to 90% (RH); -10°C to 60°C (14°F to 140°F)
|
Price: $299.00 Part #: T-VAI-HMD-40Y
|
| Optional Accessories |
 |
Solar Radiation Shield
>> Improves Temp and RH Accuracy in Direct Sun Light Areas
>> Pre-Assembled, Ready to Install with Compatible Sensors
>> Monted on a Pole, Post or Flat Vertical Surface
>> Includes Mounting Bracket and Mounting Hardware
|
| Quantity | Price Each | | 1 - 9 | $59.00 | | 10+ | $55.00 | Part #: RS3
|
 |
Weatherproof Connection Housing for Smart Sensors
>> 6" Long PVC Weatherproof Connection Housing
>> Includes Silicone Lubricant
|
| Quantity | Price Each | | 1 - 4 | $21.00 | | 5+ | $20.00 | Part #: S-EXT-CASE
|
 |
2 Meter Smart Sensor Extension Cable
>> 2 Meter Male to Male Extension Cable
>> Includes Female to Female Adaptor
|
Price: $20.00 Part #: S-EXT-M002
|
 |
5 Meter Smart Sensor Extension Cable
>> 5 Meter Male to Male Extension Cable
>> Includes Female to Female Adaptor
|
| Quantity | Price Each | | 1 - 4 | $25.00 | | 5+ | $24.00 | Part #: S-EXT-M005
|
 |
10 Meter Smart Sensor Extension Cable
>> 10 Meter Male to Male Extension Cable
>> Includes Female to Female Adaptor
|
| Quantity | Price Each | | 1 - 4 | $30.00 | | 5+ | $29.00 | Part #: S-EXT-M010
|
 |
25 Meter Smart Sensor Extension Cable
>> 25 Meter Male to Male Extension Cable
>> Includes Female to Female Adaptor
|
| Quantity | Price Each | | 1 - 4 | $45.00 | | 5+ | $38.00 | Part #: S-EXT-M025
|
 |
Replacement Humidity Sensor Caps
>> 5 RH Sensor Caps with Membrane
>> 10 Pieces of White Tape
|
| Quantity | Price Each | | 1 - 9 | $48.00 | | 10+ | $0.00 | Part #: HUM-RHCAP2
|
 |
Replacement RH Sensor
>> RH Sensor Board
>> RH Sensor Cap with Attached Protective Membrane
>> Adhesive Tape
>> Pre-lubricated O-Ring for Logger End Cap
|
Price: $65.00 Part #: HUM-RHPCB-2
|
 |
12-Bit Temp Smart Sensor w/ 2 Meter Cable
>> Automatically Communicates Configuration Data to the Attached Logger (Sold Separately)
>> Measurement Range: -40°C to 100°C (-40°F to 212°F)
>> Accuracy: ±0.2°C or Better
>> Stainless Steel Sensor Tip
>> Cable Length:2 Meters
|
| Quantity | Price Each | | 1 - 4 | $95.00 | | 5+ | $91.00 | Part #: S-TMB-M002
|
 |
12-Bit Temperature Sensor w/ 6 Meter Cable
>> Automatically Communicates Configuration Data to the Attached Logger (Sold Separately)
>> Measurement Range: -40°C to 100°C (-40°F to 212°F)
>> Accuracy: ±0.2°C or Better
>> Stainless Steel Sensor Tip
>> Cable Length: 6 Meters
|
| Quantity | Price Each | | 1 - 4 | $105.00 | | 5+ | $100.00 | Part #: S-TMB-M006
|
 |
12-Bit Temperature Smart Sensor w/ 17 Meter Cable
>> Automatically Communicates Configuration Data to the Attached Logger (Sold Separately)
>> Measurement Range: -40°C to 100°C (-40°F to 212°F)
>> Accuracy: ±0.2°C or Better
>> Stainless Steel Sensor Tip
>> Cable Length: 17 Meters
|
| Quantity | Price Each | | 1 - 4 | $120.00 | | 5+ | $115.00 | Part #: S-TMB-M017
|
| Optional Accessories |
 |
Solar Radiation Shield
>> Improves Temp and RH Accuracy in Direct Sun Light Areas
>> Pre-Assembled, Ready to Install with Compatible Sensors
>> Monted on a Pole, Post or Flat Vertical Surface
>> Includes Mounting Bracket and Mounting Hardware
|
| Quantity | Price Each | | 1 - 9 | $59.00 | | 10+ | $55.00 | Part #: RS3
|
 |
Weatherproof Connection Housing for Smart Sensors
>> 6" Long PVC Weatherproof Connection Housing
>> Includes Silicone Lubricant
|
| Quantity | Price Each | | 1 - 4 | $21.00 | | 5+ | $20.00 | Part #: S-EXT-CASE
|
 |
2 Meter Smart Sensor Extension Cable
>> 2 Meter Male to Male Extension Cable
>> Includes Female to Female Adaptor
|
Price: $20.00 Part #: S-EXT-M002
|
 |
5 Meter Smart Sensor Extension Cable
>> 5 Meter Male to Male Extension Cable
>> Includes Female to Female Adaptor
|
| Quantity | Price Each | | 1 - 4 | $25.00 | | 5+ | $24.00 | Part #: S-EXT-M005
|
 |
10 Meter Smart Sensor Extension Cable
>> 10 Meter Male to Male Extension Cable
>> Includes Female to Female Adaptor
|
| Quantity | Price Each | | 1 - 4 | $30.00 | | 5+ | $29.00 | Part #: S-EXT-M010
|
 |
25 Meter Smart Sensor Extension Cable
>> 25 Meter Male to Male Extension Cable
>> Includes Female to Female Adaptor
|
| Quantity | Price Each | | 1 - 4 | $45.00 | | 5+ | $38.00 | Part #: S-EXT-M025
|
 |
Electronic Switch Pulse Input Adapter w/ 1 Meter Cable
>> Connects Sensors with Pulse Outputs to Loggers with Smart Sensor Inputs
>> Maximum Input Frequency of 120Hz (120 Pulses Per Second)
>> 16-Bit Resolution
>> Compatible with Electronic Switch Closures with FET or Open-Collector Outputs or CMOS-Level Logic Signals
>> Cable Length: 1 Meter
|
Price: $70.00 Part #: S-UCC-M001
|
 |
Electronic Switch Pulse Input Adapter w/ 6 Meter Cable
>> Connects Sensors with Pulse Outputs to Loggers with Smart Sensor Inputs
>> Maximum Input Frequency of 120Hz (120 Pulses Per Second)
>> 16-Bit Resolution
>> Compatible with Electronic Switch Closures with FET or Open-Collector Outputs or CMOS-Level Logic Signals
>> Cable Length: 6 Meters
|
Price: $75.00 Part #: S-UCC-M006
|
 |
Contact Closure Pulse Input Adapter
>> Connects Sensors with Pulse Outputs to Loggers with Smart Sensor Inputs
>> Maximum Input Frequency of 2Hz (2 Pulses Per Second) with Switch Type of Normally-Open
>> 16-Bit Resolution
>> Compatible with Contact Closures, Such as Tipping Bucket Rain Gauges or Reed Switches
>> Cable Length: 1 Meter
|
Price: $70.00 Part #: S-UCD-M001
|
 |
Contact Closure Pulse Input Adapter
>> Connects Sensors with Pulse Outputs to Loggers with Smart Sensor Inputs
>> Maximum Input Frequency of 2Hz (2 Pulses Per Second) with Switch Type of Normally-Open
>> 16-Bit Resolution
>> Compatible with Contact Closures, Such as Tipping Bucket Rain Gauges or Reed Switches
>> Cable Length: 6 Meters
|
Price: $75.00 Part #: S-UCD-M006
|
| Compatible Sensors with #S-UCC-M006 |
 |
Veris Kilowatt Hour Transducer 1-Phase, 330 Amp
>> Self-Contained 0 to 200 AMP Current Transducer for Single-Phase Power Monitoring
>> 1 Split Core AC Current Sensor and 2 Voltage Leads
>> Outputs a Signal Proportional to Killowatts of Power (Consumption)
>> Accepts Input Primary Coltage of 208 to 480 Volts AC rms
>> Requires Pulse Input Adapter (#S-UCC-M001 or #S-UCC-M006)
|
Price: $642.00 Part #: T-VER-8051-300
|
 |
Veris Kilowatt Hour Transducer 3-Phase, 800 Amp
>> Self-Contained 0 to 800 AMP Current Transducer for 3-Phase AC Loads
>> 3 Split Core AC Current Sensors and 3 Voltage Leads
>> Outputs a Signal Proportional to Killowatts of Power (Demand)
>> Accepts Input Primary Coltage of 208 to 480 Volts AC rms
>> Requires Pulse Input Adapter (#S-UCC-M001 or #S-UCC-M006)
|
Price: $849.00 Part #: T-VER-8053-800
|
 |
WattNode 208/240 VAC 3-Phase Delta kWh Transducer
>> Line to Neutral: 120 Volts AC
>> Line to Line: 208-240 Volts AC
>> Phases: 3
>> Wires: 3
|
Price: $244.00 Part #: WNB-3D-240-P
|
 |
WattNode 480 VAC 3-Phase Delta kWh Transducer
>> Line to Neutral: 277 Volts AC
>> Line to Line: 480 Volts AC
>> Phases: 3
>> Wires: 3
|
Price: $244.00 Part #: WNB-3D-480-P
|
 |
WattNode 208/240 VAC Wye kWh Transducer
>> Line to Neutral: 120 Volts AC
>> Line to Line: 208-240 Volts AC
>> Phases: 3
>> Wires: 4
|
Price: $198.00 Part #: WNB-3Y-208-P
|
| Optional Accessories |
 |
Solar Radiation Shield
>> Improves Temp and RH Accuracy in Direct Sun Light Areas
>> Pre-Assembled, Ready to Install with Compatible Sensors
>> Monted on a Pole, Post or Flat Vertical Surface
>> Includes Mounting Bracket and Mounting Hardware
|
| Quantity | Price Each | | 1 - 9 | $59.00 | | 10+ | $55.00 | Part #: RS3
|
 |
Weatherproof Connection Housing for Smart Sensors
>> 6" Long PVC Weatherproof Connection Housing
>> Includes Silicone Lubricant
|
| Quantity | Price Each | | 1 - 4 | $21.00 | | 5+ | $20.00 | Part #: S-EXT-CASE
|
 |
2 Meter Smart Sensor Extension Cable
>> 2 Meter Male to Male Extension Cable
>> Includes Female to Female Adaptor
|
Price: $20.00 Part #: S-EXT-M002
|
 |
5 Meter Smart Sensor Extension Cable
>> 5 Meter Male to Male Extension Cable
>> Includes Female to Female Adaptor
|
| Quantity | Price Each | | 1 - 4 | $25.00 | | 5+ | $24.00 | Part #: S-EXT-M005
|
 |
10 Meter Smart Sensor Extension Cable
>> 10 Meter Male to Male Extension Cable
>> Includes Female to Female Adaptor
|
| Quantity | Price Each | | 1 - 4 | $30.00 | | 5+ | $29.00 | Part #: S-EXT-M010
|
 |
25 Meter Smart Sensor Extension Cable
>> 25 Meter Male to Male Extension Cable
>> Includes Female to Female Adaptor
|
| Quantity | Price Each | | 1 - 4 | $45.00 | | 5+ | $38.00 | Part #: S-EXT-M025
|
| Learn more about the Pulse Input Adapters. |
 |
Telaire 7001 Carbon Dioxide (CO2) Monitor Provides a display of CO2 and temperature
Can be used with data loggers that accept voltage input to monitor and record carbon dioxide levels
|
| Quantity | Price Each | | 1 - 9 | $459.00 | | 10+ | $449.00 | Part #: TELAIRE-7001
|
| Optional Accessories |
 |
CO2 and Temperature Output Cable
>> CO2 and Temperature Output Cable with 2 Leads
|
Price: $24.00 Part #: 2070
|
 |
HOBO Wind Speed Smart Sensor
>> Uses 3-Cup Anemometer
>> Plug-In Modular Connection
>> Measurement Range: 0 to 45 m/s (0 to 100 mph)
>> Accuracy: ±1.1 m/s (2.4 mph) or 4% of Reading Whichever is Greater
>> Cable Length: 3 Meters
|
| Quantity | Price Each | | 1 - 4 | $239.00 | | 5+ | $227.00 | Part #: S-WSA-M003
|
 |
Wind Speed and Direction Smart Sensor
>> Average Wind Speed, Top 3 Second Gust and Average Wind Direction in Sampling Interval
>> Designed with A Large Wind Vane Area for High Sensitivity
>> Fiberglass Reinforced Thermoplastic Cups and Shielded Stainless Steel Ball Bearings for Fast Response
>> Wind Vane has Metal Bushings
|
| Quantity | Price Each | | 1 - 4 | $540.00 | | 5+ | $515.00 | Part #: S-WCA-M003
|
 |
RM Young Wind Monitor - AQ Adapter
>> Range: 0 to 52 m/s ( 0 to 116 mph)
>> Resolution: 0.20 m/s (0.46 mph)
>> Direction Range: 0 to 358 Degrees
>> Direction Resolution: 1.4 Degrees
>> Model: 05305
>> Cable Length: 3 Meters
|
Price: $150.00 Part #: S-WCB-M003
|
 |
RM Young Marine Wind Monitor Adapter
>> Range: 0 to 50 m/s ( 0 to 111 mph)
>> Resolution: 0.20 m/s (0.46 mph)
>> Direction Range: 0 to 358 Degrees
>> Direction Resolution: 1.4 Degrees
>> Model: 05106
>> Cable Length: 3 Meters
|
Price: $150.00 Part #: S-WCC-M003
|
 |
RM Young Wind Sentry Adapter
>> Range: 0 to 50 m/s ( 0 to 112 mph)
>> Resolution: 0.20 m/s (0.46 mph)
>> Direction Range: 0 to 358 Degrees
>> Direction Resolution: 1.4 Degrees
>> Model: 03002
>> Cable Length: 3 Meters
|
Price: $150.00 Part #: S-WCD-M003
|
 |
RM Young Wind Monitor Adapter for Wind/Alpine
>> Range: 0 to 52 m/s ( 0 to 116 mph)
>> Resolution: 0.20 m/s (0.46 mph)
>> Direction Range: 0 to 358 Degrees
>> Direction Resolution: 1.4 Degrees
>> Model: 05103, 05103-45
>> Cable Length: 3 Meters
|
Price: $150.00 Part #: S-WCE-M003
|
| Accessories - Required |
 |
Half Cross Arm
>> Provides Unobstructed Wind Measurements
>> Use with Tripods or Masts
>> Designed for Mounting 1 Wind Sensor
|
| Quantity | Price Each | | 1 - 4 | $45.00 | | 5+ | $43.00 | Part #: M-CAB
|
| Optional Accessories |
 |
Solar Radiation Shield
>> Improves Temp and RH Accuracy in Direct Sun Light Areas
>> Pre-Assembled, Ready to Install with Compatible Sensors
>> Monted on a Pole, Post or Flat Vertical Surface
>> Includes Mounting Bracket and Mounting Hardware
|
| Quantity | Price Each | | 1 - 9 | $59.00 | | 10+ | $55.00 | Part #: RS3
|
 |
Weatherproof Connection Housing for Smart Sensors
>> 6" Long PVC Weatherproof Connection Housing
>> Includes Silicone Lubricant
|
| Quantity | Price Each | | 1 - 4 | $21.00 | | 5+ | $20.00 | Part #: S-EXT-CASE
|
 |
2 Meter Smart Sensor Extension Cable
>> 2 Meter Male to Male Extension Cable
>> Includes Female to Female Adaptor
|
Price: $20.00 Part #: S-EXT-M002
|
 |
5 Meter Smart Sensor Extension Cable
>> 5 Meter Male to Male Extension Cable
>> Includes Female to Female Adaptor
|
| Quantity | Price Each | | 1 - 4 | $25.00 | | 5+ | $24.00 | Part #: S-EXT-M005
|
 |
10 Meter Smart Sensor Extension Cable
>> 10 Meter Male to Male Extension Cable
>> Includes Female to Female Adaptor
|
| Quantity | Price Each | | 1 - 4 | $30.00 | | 5+ | $29.00 | Part #: S-EXT-M010
|
 |
25 Meter Smart Sensor Extension Cable
>> 25 Meter Male to Male Extension Cable
>> Includes Female to Female Adaptor
|
| Quantity | Price Each | | 1 - 4 | $45.00 | | 5+ | $38.00 | Part #: S-EXT-M025
|
 |
Leaf Wetness Smart Sensor
>> Accurate Leaf Wetness Measurement
>> Measurement Range 0 (Dry) to 100% (Wet)
>> Repeatability: ±5%
>> Cable Length: 3 Meters
>> Includes Mounting Bracket
|
Price: $110.00 Part #: S-LWA-M003
|
 |
20-cm Probe Smart Soil Moisture Sensor
>> Measures Soil Water Content Using Field-Proven ECH20 Sensor
>> Probe Length: 20 cm
>> Measurement Range: -0.29 to 1.4475 m3/m3 (Full Scale)
>> Cable Length: 5 Meters
|
| Quantity | Price Each | | 1 - 4 | $139.00 | | 5+ | $132.00 | Part #: S-SMA-M005
|
 |
10-cm Probe Smart Soil Moisture Sensor
>> Measures Soil Water Content Using Field-Proven ECH20 Sensor
>> Probe Length: 10 cm
>> Measurement Range: -0.29 to 1.4475 m3/m3 (Full Scale)
>> Cable Length: 5 Meters
|
| Quantity | Price Each | | 1 - 4 | $139.00 | | 5+ | $132.00 | Part #: S-SMB-M005
|
 |
5-cm Probe Smart Soil Moisture Sensor
>> Measures Soil Water Content Using Field-Proven ECH20 Sensor
>> Probe Length: 5 cm
>> Measurement Range: -0.29 to 1.4475 m3/m3 (Full Scale)
>> Cable Length: 5 Meters
|
| Quantity | Price Each | | 1 - 4 | $139.00 | | 5+ | $132.00 | Part #: S-SMC-M005
|
 |
PAR Sensor w/ 3 Meter Cable
>> Measures Photosynthetically Active Radiation (PAR)
>> Measurement Range: 0 to 2500 mol/m2/sec; Wavelengths 400 to 700 nm
>> Optical Filtering for Flatter Response and Better Accuracy
>> Enclosed in a Anodized Aluminum Housing for Outdoor and Weatherproof Use
>> Cable Length: 18 Meters
|
| Quantity | Price Each | | 1 - 4 | $220.00 | | 5+ | $210.00 | Part #: S-LIA-M003
|
 |
PAR Sensor w/ 18 Meter Cable
>> Measures Photosynthetically Active Radiation (PAR)
>> Measurement Range: 0 to 2500 mol/m2/sec; Wavelengths 400 to 700 nm
>> Optical Filtering for Flatter Response and Better Accuracy
>> Enclosed in a Anodized Aluminum Housing for Outdoor and Weatherproof Use
>> Cable Length: 18 Meters
|
Price: $250.00 Part #: S-LIA-M018
|
 |
Silicon Pyranometer Sensor w/ 3m Cable
>> Reports the Average Light Intensity Over Logging Interval
>> Measurement Range: 0 to 1280 W/m2, Spectral Range 300 to 1100 nm
>> Azimuth Error: ±2% Error at 45° from Vertical
>> Cable Length: 3 Meters
|
| Quantity | Price Each | | 1 - 4 | $210.00 | | 5+ | $199.00 | Part #: S-LIB-M003
|
 |
Silicon Pyranometer Sensor w/ 18 m Cable
>> Reports the Average Light Intensity Over Logging Interval
>> Measurement Range: 0 to 1280 W/m2, Spectral Range 300 to 1100 nm
>> Azimuth Error: ±2% Error at 45° from Vertical
>> Cable Length: 18 Meters
|
| Quantity | Price Each | | 1 - 4 | $250.00 | | 5+ | $199.00 | Part #: S-LIB-M018
|
| Optional Accessories |
 |
Light Sensor Bracket
>> Designed for Use with Tripods, Masts or Flat Surfaces
>> Used to Avoid Obstructions and Shadows for PAR and Solar Radiation Readings
>> Includes Leveling Screws
|
| Quantity | Price Each | | 1 - 4 | $29.00 | | 5+ | $28.00 | Part #: M-LBB
|
 |
Light Sensor Level
>> Drop Light Sensor Level over PAR or Solar Radiation Sensor to Determine if Level
>> Can be Used on Any Number of Light Sensors
|
| Quantity | Price Each | | 1 - 4 | $35.00 | | 5+ | $34.00 | Part #: M-LLA
|
 |
Solar Radiation Shield
>> Improves Temp and RH Accuracy in Direct Sun Light Areas
>> Pre-Assembled, Ready to Install with Compatible Sensors
>> Monted on a Pole, Post or Flat Vertical Surface
>> Includes Mounting Bracket and Mounting Hardware
|
| Quantity | Price Each | | 1 - 9 | $59.00 | | 10+ | $55.00 | Part #: RS3
|
 |
Weatherproof Connection Housing for Smart Sensors
>> 6" Long PVC Weatherproof Connection Housing
>> Includes Silicone Lubricant
|
| Quantity | Price Each | | 1 - 4 | $21.00 | | 5+ | $20.00 | Part #: S-EXT-CASE
|
 |
2 Meter Smart Sensor Extension Cable
>> 2 Meter Male to Male Extension Cable
>> Includes Female to Female Adaptor
|
Price: $20.00 Part #: S-EXT-M002
|
 |
5 Meter Smart Sensor Extension Cable
>> 5 Meter Male to Male Extension Cable
>> Includes Female to Female Adaptor
|
| Quantity | Price Each | | 1 - 4 | $25.00 | | 5+ | $24.00 | Part #: S-EXT-M005
|
 |
10 Meter Smart Sensor Extension Cable
>> 10 Meter Male to Male Extension Cable
>> Includes Female to Female Adaptor
|
| Quantity | Price Each | | 1 - 4 | $30.00 | | 5+ | $29.00 | Part #: S-EXT-M010
|
 |
25 Meter Smart Sensor Extension Cable
>> 25 Meter Male to Male Extension Cable
>> Includes Female to Female Adaptor
|
| Quantity | Price Each | | 1 - 4 | $45.00 | | 5+ | $38.00 | Part #: S-EXT-M025
|
 |
Rain Gauge Smart Sensor w/ English Measurement System
>> Measures up to 5" of Rain Per Hour
>> Resolution of 0.01" and Max. 4000 Tips per Interval
>> Tipping Bucket Mounted on a Stainless Steel Shaft with Brass Bearings
>> Cable Length: 2 Meters
|
| Quantity | Price Each | | 1 - 4 | $410.00 | | 5+ | $391.00 | Part #: S-RGA-M002
|
 |
Rain Gauge Smart Sensor (0.2mm) with 2m cable
>> Measures up to 10 cm of Rain Per Hour
>> Resolution of 0.2 mm and Max. 4000 Tips per Interval
>> Tipping Bucket Mounted on a Stainless Steel Shaft with Brass Bearings
>> Cable Length: 2 Meters
|
| Quantity | Price Each | | 1 - 4 | $410.00 | | 5+ | $391.00 | Part #: S-RGB-M002
|
| Optional Accessories |
 |
Weatherproof Connection Housing for Smart Sensors
>> 6" Long PVC Weatherproof Connection Housing
>> Includes Silicone Lubricant
|
| Quantity | Price Each | | 1 - 4 | $21.00 | | 5+ | $20.00 | Part #: S-EXT-CASE
|
 |
2 Meter Smart Sensor Extension Cable
>> 2 Meter Male to Male Extension Cable
>> Includes Female to Female Adaptor
|
Price: $20.00 Part #: S-EXT-M002
|
 |
5 Meter Smart Sensor Extension Cable
>> 5 Meter Male to Male Extension Cable
>> Includes Female to Female Adaptor
|
| Quantity | Price Each | | 1 - 4 | $25.00 | | 5+ | $24.00 | Part #: S-EXT-M005
|
 |
10 Meter Smart Sensor Extension Cable
>> 10 Meter Male to Male Extension Cable
>> Includes Female to Female Adaptor
|
| Quantity | Price Each | | 1 - 4 | $30.00 | | 5+ | $29.00 | Part #: S-EXT-M010
|
 |
25 Meter Smart Sensor Extension Cable
>> 25 Meter Male to Male Extension Cable
>> Includes Female to Female Adaptor
|
| Quantity | Price Each | | 1 - 4 | $45.00 | | 5+ | $38.00 | Part #: S-EXT-M025
|
 |
Water Flow Meter
>> Measurement Range: 0 top 22 gpm
>> 3/4" Pipe Size with Step Ups and Step Downs Available
>> Pulse Output Using Dry Contact Reed Switch
>> Requires Pulse Input Adapter (#S-UCD-M006)
|
Price: $105.00 Part #: T-MINOL-130
|
MicroDAQ.com accepts Visa, MasterCard and American Express

All prices are in U.S. Dollars.
No U.S. sales tax
|