Accessories for Submersible Level Transducers
Digital Display Meters
Model 3019 Display Meter
The Display Meter provides a visual readout of a sinlge KPSI transducer having
mA or VDC output. It utilizes a red 0.54" LED display with 4 active characters
to indicate a numeric range of -1999 to 9999. It operates from VAC power
and provides a 24 VDC supply for power to the transducer. It provides a sophisicated
display of the transducer output with six (6) 14-segment LEDs for display
of true alphanumeric characters. Programmable input configuration, isolated
transducer power supply, selectable 2-point scaling or up to 17-point linearization,
optional 4-20mA retransmission, and two or four optional 10-amp SPDT alarm
contacts for control are the main features of the 3019 Display Meter. The
display meter has a NEMA 4X front panel with a polycarbonate bezel and a
1/8 DIN aluminum housing measuring 1.9375" H x 3.75" W x 6.5" Diameter.
Order the Model 3019 Display Meter
Model 3620 Display Meter
Like the Model 3019, the 3620 utilizes a red 0.54" LED display with 4 active
characters to indicate a numeric range of -1999 to 9999. It operates from VAC
power and provides a 24 VDC supply for power to the transducer. This rugged model
is specifically designed to operate external pumps via two (2) 10-amp SPDT alarm
contacts. Front panel scaling, operate from -20 to 70°C and uses 120 or 240
VDC are the main features of this display meter. The NEMA 4X rated enclosure
can be surface or panel mounted and measures 3.2" H
x 5.5" W x 2.7" in diameter.
Order the Model 3620 Display Meter
Lightning/Surge Protection
Lightning/Surge Protection is offered for output signal versions of 0-5 VDC
and 4-20mA. Contact MicroDAQ Sales for more
information.
Order Lightning/ Surge Protection for your Level Transducer
Moisture Protection
Series 810 Vent Filter
A desiccant-filled vent filter designed to prevent mositure from entering
the vent tube for at least one (1) year without maintenance. The vent
provides an atmospheric reference for the sensor, which is necessary
for ensuring the highest possible accuracy when making a level measurement.
If left unprotected, the vent provides a pathway for water and could
create and offset in the transducer output, or cause permanent damage.
Order a Series 810 Vent Filter
Series 815 Aneroid Bellows
A direct replacement for the Series 810 Vent filter where periodic maintenance
is not practical. This sensitive bellows responds to and transmits
changes in atmospheric pressure to the sensor while remaining a maintenance-free,
closed system. It should be noted, however, that the bellows may
not be a suitable replacement for the desiccant cartridge in applications
where extremely high accuracy is required, usually 0.25% or better
or where the bellows may be exposed to extreme temperature changes.
Order Series 815 Aneroid Bellows
Replaceable and Interchangeable Nose Caps
Open-face Nose Cap
The Open-face Nose Cap offers the best resistance to clogging. This single-piece
nose cap provides maximum exposure of the sensing diaphragm to the
liquid media through a protective perforated screen on the front.
The open-face nose cap is constructed from molded Delrin®.
Order an Open-Face Nose Cap
Closed-face Nose Cap
The Open-face Nose Cap offers the best protection against damage to the
sensing diaphragm. This single-piece nose cap allows the liquid media
to enter through 6ea 1/8" holes around the outside and includes a
#8-32 UNC-2B threaded hole on the front. The closed-face nose cap
is constructed from molded Delrin®.
Order a Closed-Face Nose Cap
Piezometer Nose Cap
The Piezometer Nose Cap offers the best alternative for burying the transducer
in the ground without the risk to the sensing diaphragm. This two
(2) oiece nose cap allows the liquid media to enter through a permeable
40 micron centered stainless steel mesh filter at the front of the
cap. The piezometer nose cap is constructed from molded Delrin®.
Order a Piezometer Nose Cap
Male NPT Nose Cap
The Male NPT Nose Cap offers the best alternative for installing the
transducer on a pipe. This single-piece nose cap incorporates a 1/4"
-18 or a 1/2" -14 MNPT fitting on the front for connection. The male
NPT nose cap is constructed of stainless steel or titanium, as required.
The open-face nose cap is constructed from molded Delrin®.
Order a Male NPT Nose Cap
Corrosion Protection
Body Clamp Anode
The Body Clamp Anode is a 2.2" (5.6 cm) diameter zinc sphere of which
the two (2) halves bolt onto the transducer housing. The anode weighs
approximately 13oz (370 g).
Order the Body Clamp Anode
Nose Extension Anode
The Body Clamp Anode is a 5.25" (13.34 cm) long by 1.0" diameter zinc
cyclinder that attaches to a closed-face nose cap. The anode
weighs approximately 15oz (417 g) and is shipped with an attached stainless
steel closed-face nose cap.
Order the Nose Extension Anode
Installation Hardware
Anti-Snag Cone
Anti-Snag Cones are designed to fit over the cable end of either 1.0" or
0.75" diameter transducers to prevent the transducers from getting hung
on obstacles when pulling the cable. The cones are contructed of PVC
and come in separate sizes for the two (2) diameters.
Order the Anti-Snag Cone
Cable Hanger
The cable hanger is used to suspend the transducers in the liquid media.
The hanger slides onto the cable from the unterminated end and is
easily positioned while pushing the ends of the hanger together.
As the hanger expands from the weight of the transducer, it grips
the cable by the sheath. The cable hanger is 6.0" (15.3 cm) long
and is constructed of 304 Stainless Steel.
Order the Cable Hanger
Mounting Clamp
The mounting clamp is used to secure 1.0" diameter transducers to a bulkhead.
The clamp consists of a 304 stainless steel bracket with a thermoplastic
insert that holds the transducer housing.
Order the Mounting Clamp
Well Caps
Locking Well Caps enable transducers to be suspended within the well
while providing security. The vented orange PVC caps are 2" and 4"
ID and come with a 304 stainless steel dock ( ring and threaded quick-link)
to support a cable hanger. The dual-hinge locking llid uses a Buna-N/Nitril
o-ring for a watertight seal. The black triangle warning label warning
label on the lid can be marked for well identification.
Order Well Caps
Junction Box
The Junction Box provides a water-resistant enclosure for electricity
connecting the transducer cable to the users system via a terminal
strip. The enclosure also provides convenient location for terminating
the vent tube vented gage transducers. The enclosure can be ordered
with either a vent filter or an aneroid bellows. The encosure is
constructed of polycarbonate with a clear top incorporating a neoprene
seal. The junction box is rated IP66 and measures 9.45" x 6.30" x
4.42". Mounting screws are provided.
Order Junction Box
Identification Tags
Indentification Tags are available to attach to the transducer cable
to provide wasy identification in the field. User-specific information
is laser engraved onto the 1.0" square tag, which is constructed
of 304 Stainless Steel.
Order Identification Tags
Cable Splice Kit
The Cable Splice Kit provides a waterproof connection to extend or repair
Pressure Systems submersible cables. In many cases, the cable splice
kit is a more economical alternative for repairing damaged cable.
The kit includes all necessary items to electrically connect and
insulate the conductors, couple the vent tubes, and seal the 316
Stainless steel housing to either polyurethane and Tefzel cable.
Assembly instructions are also included.
Order the Cable Splice Kit
Ordering Information
| Description |
Part Number |
Qty 1-9 |
Qty 10+ |
|
Optional Transducer Accessories |
| Installation Hardware |
| Anti-Snag Cone, 1" Diameter for use with Molded Cable Seal |
42-01-66181
|
$19.00 |
call |
 |
| Anti-Snag Cone, 1" Diameter for use with Gland Cable Seal |
42-01-64134
|
$19.00 |
call |
|
| Anti-Snag Cone 3/4" Diameter for use with Gland Cable Seal |
42-01-64136
|
$17.00 |
call |
|
| Pressure Systems Mounting clamp |
49-06-00PC
|
$19.00 |
call |
|
| Junction Box with 810 Vent Filter |
840
|
$250.00 |
call |
|
| Pressure Systems Junction box with 815 aneroid bellows |
845
|
$286.00 |
call |
|
| Pressure Systems Cable Spice kit |
830
|
$120.00 |
call |
|
| Pressure Systems RS-485 to RS-232 communication cable |
860
|
$140.00 |
call |
|
| 2" Vented Locking Well Cap with Dock |
861-2A
|
$60.00 |
call |
|
| 2" Vented Locking Well Cap |
861-2B
|
$40.00 |
call |
|
| 2" Well Dock |
861-2C
|
$20.00 |
call |
|
| 4" Vented Locking Well Cap with Dock |
861-4A
|
$90.00 |
call |
|
| 4" Vented Locking Well Cap |
861-4B
|
$55.00 |
call |
|
| 4" Well Dock |
861-4C
|
$40.00 |
call |
|
| Replaceable/Interchangeable Nose Caps |
| Open-face Nose Cap |
42-30-6659
|
$27.50 |
call |
|
| Closed-face Nose Cap |
42-01-1314A
|
$27.50 |
call |
|
| Piezometer Nose Cap |
42-30-6676S
|
$27.50 |
call |
|
| Stainless Steel 1/4" - 18 Male NPT Nose Cap |
42-01-64154
|
$27.50 |
call |
|
| Titanium 1/4" - 18 Male NPT Nose Cap |
42-01-64154T
|
$33.00 |
call |
|
| Stainless Steel 1/2" - 14 Male NPT Nose Cap |
42-02-64180
|
$27.50 |
call |
|
| Titanium 1/2" - 14 Male NPT Nose Cap |
42-02-64180T
|
$33.00 |
call |
|
| Corrosion Protection |
| Pressure Systems Sacrificial anode body clamp |
820
|
$22.00 |
call |
|
| Pressure Systems Sacrificial anode nose extension |
825
|
$22.00 |
call |
|
| Moisture Protection |
| Pressure Systems Vent filter |
810
|
$24.00 |
call |
|
| Pressure Systems Aneroid Bellows |
815
|
$36.00 |
call |
|
| Digital Displays |
| 115 VAC Power, 4.5 Digit Red LED, mA or VDC input |
D3019
|
$425.00 |
call |
|
| 115 VAC Power, 4.5 Digit Red LED, mA or VDC input with two 10A control relays |
D3019-2
|
$540.00 |
call |
|
| 115 VAC Power, 4.5 Digit Red LED, mA or VDC input with 4-20 mA output |
D3019-420
|
$540.00 |
call |
|
| 90 to 140 VAC Power, 4.5 Digit Red LED, mA or VDC input with two 10A control relays and 4-20 mA outputs |
D3019-2-420
|
$660.00 |
call |
|
| 90 to 140 VAC Power, 4.5 Digit Red LED, mA or VDC input with four 10A control relays |
D3019-4
|
$660.00 |
call |
|
| 90 to 140 VAC Power, 4.5 Digit Red LED, mA or VDC input with four 10A control relays and 4-20 mA outputs |
D3019-4-420
|
$775.00 |
call |
|
| Pressure Systems Pump Controller, (2) SPDT, 10 Amp alarm contacts, 4 digit display-flashing or nonflashing, 24V @ 40 mA transmitter power, alarm alternation-selectable |
D3620
|
$460.00 |
call |
|
| Pressure Systems Pump Controller, (3) SPDT, 10 Amp alarm contacts, 4 digit display-flashing or nonflashing, 24V @ 40 mA transmitter power, alarm alternation-selectable |
D3621
|
$575.00 |
call |
|
| Lightning Protection |
| Lightning Protection for 40-20 mA output, Stainless Steel |
Option-009
|
$335.00 |
call |
|
| Lightning Protection for 40-20 mA output, Titanium |
Option-009T
|
$347.00 |
call |
|
| Lightning Protection for VDC and SDI-12 output, Stainless Steel |
Option-012
|
$515.00 |
call |
|
| Lightning Protection for VDC and SDI-12 output, Titanium |
Option-012T
|
$527.00 |
call |
|
| External Line Protector |
50-02-2790
|
$140.00 |
call |
|
- You may change quantities from within your cart.
- If you do not wish to order online call us toll free at 877-275-9606
between the hours of 9-5 Eastern Standard time.
MicroDAQ.com accepts
Visa, MasterCard and American Express
All prices are in U.S. Dollars.
No U.S. sales tax
|
