4-Channel Voltage Data Logger w/ Graphing LCD Display
TandD Multi-Channel Battery-Operated Voltage Recorder with Automatic Data Export to SD Card
SKU
MCR-4V
In Stock
$369.00
- Measure and Record Voltage Readings in 4 Different Measurement Ranges Up to 24 Volts DC
- Data Transfered to PC for Analysis Using USB (Cable Included) or SD Card
- Touch Panel for Setup and Configuration Changes in the Field
- 4 Units Can be Coupled Together for up to 16 Channel Recording Simultaneously
- LCD Display Shows Current Readings, Trend Graph, Battery Status and Configuration Settings
Includes (2) AA Alkaline Batteries, USB Cable, PC Software, Card Slot Cover and User Manual
TandD MCR-4V 4-Channel Voltage Data Logger
Get fast, precise voltage measurements with the TandD MCR-4V multi-channel voltage data logger. This 4-channel, battery-operated voltage recorder exports data automatically to an SD card. The MCR-4V voltage data logger has a recording interval as short as 2 milliseconds and a minimum voltage resolution of 10 microvolts. Selectable voltage ranges include ±300mV, ±1.5V, ±6.0V, ±24V, and auto. As many as four units can be joined together to measure and record up to 16 channels. There’s a graphing LCD display and recorded data can be sent directly to a computer via the USB connection.
TandD MCR-4V 4-Channel Voltage Data Logger Specifications
Measurement | Voltage (Up to 4 Channels) |
Voltage | Measurement Range: ±300mV; ±1.5V; ±6.0V; ±24V and Auto* Absolute Max. Measurement Range: ±50 Volts Breakdown Voltage: ±28 Volts Accuracy: ±0.3% Input Frequency: 100 Hz DC Input Impedance: Approx. 1.1 MΩ Input Method: Scaning Method, Diff. Input, Each Channel Isolated Resolution: 0.01 mV (50/60 Hz Filter On); 0.1 mV (50/60Hz Filter Off) * Measurement Range will be Automatically Changed According to the Voltage Being Measured |
Preheat Function | Voltage Range: 3V to 24 Volts (External Power Supply) Allowable Max Current: 1.0 Amps |
Recording Method | Instanteous, Average (Ave), Fine |
Sampling Interval | 2, 5, 10, 20, 50, 100, 200, 500 ms 1, 2, 5, 10, 15, 20, 30 Seconds 1, 2, 5, 10, 15, 20, 30, 60 Minutes Minimum Interval will Depend on the Number of Channels, Measurement Range and Hz Filter Setting |
Data Storage Capacity | Up to 480,000 Readings (1 Channel); Up to 240,000 Readings (2 Channels); Up to 160,000 (3 Channels); Up to 120,000 Readings (4 Channels) |
Recording Mode | Endless: Overwrite Oldest Data when Capacity is Full One-time: Stop Recording when Capacity is Full |
Group Recording | Up to 4 Units (16 Channels) Can Be Recorded Simultaneously |
Start Modes | Immediate or Programmed |
LCD Display | Current Readings, Battery Life and Trend Graph |
Power | (2) AA (Alkaline or Lithium) Battery USB Powered |
Battery Life | 4.5 Days to 150 Days NOTE: Battery Life Depends on Measurement Environment, Sampling Interval and Battery Performance |
Communication Type | USB |
External Storage | SD Memory Card (SDHC Memory Card) - Sold Separately NOTE: Measurement Data Cannot be Directly Recorded onto the Memory Card. Used to Transfer Recorded Data from Data Logger to PC Only. |
Input and Preheat Terminals | Screwless Terminals Single Wire: 0.32mm to 0.65mm (28 AWG to 22 AWG) Twisted Wire: 0.08 to 0.32mm (28 to 22 AWG). 0.12mm or More in Diameter Strip Length: 9mm to 10mm |
Isolation | CH1, CH2, CH3, CH4, USB and Preheat are Isolated Max Applied Voltage: 50 Volts Electrical Isolation Resistance: 50 MΩ or More NOTE: Battery Terminals are Not Isolated from CH1 to Ch4 Input Terminals |
Operating Environment | Temperature: 0°C to 50°C Humidity: 90%RH or Less (No Condensation) |
Weight | 190 grams (Includes Battery) |
Dimension | 120mm x 75mm x 32mm |
Customer Questions