Ech2o Soil Moisture Probe
The Ech2o soil moisture probe measures the dielectric constant of the
soil in order to find its volumetric water content. Since the dielectric
constant of water is much higher than that of air or soil minerals,
the dielectric constant of the soil is a sensitive measure of
water content. The soil moisture probe has a very low power requirement
and high resolution. This allows you the ability to take as
many measurements as you want (even hourly) over a long period
of time (like a growing season, for example), with minimal battery
usage.
Features
- Simple Soil Insertion
- Vertical or Horizontal Orientation
- Accuracy of ±3%
- Calibration to ±%
- Range of 0 to Volumetric Saturation
- Usuable in Peat Moss & Organic Potting Soil
Specifications
| Measurement Time: |
10ms (milliseconds) |
| Accuracy: |
Typically ± m/m (± 3%)
With soil-specific calibration ± .01 m/m (± 1%)
|
| Resolution: |
0.002m3/m3 (0.1%) |
| Power Requirements: |
2.5 VDC @ 2mA to 5VDC @7mA |
| Power Output: |
10 - 40% of excitation voltage (250 - 1000 mV at 2500mV excitation) |
| Operating Environment: |
0 to 50° C |
| Range of Measurement: |
0 to Saturated Volumetric Water Content |
| Probe Dimensions: |
Model EC-10: 14.5cm x 3.17cm x .15cm
Model EC-20: 25.4cm x 3.17cm x .15cm
|
| Standard Cable Length: |
5m |
Software / Accessories
Required with each Ech2o Soil Moisture Sensor
Ordering Information
| Description |
Part Number |
Qty 1-9 |
Qty 10+ |
|
| Ech2o Soil Moisture Probe (4" Length) |
EC-10
|
$130.00 |
call |
 |
| Ech2o Soil Moisture Probe (8" Length) |
EC-20
|
$135.00 |
call |
 |
| Interface Cable - Required |
| Moisture Sensor Adapter Cable |
VR-2C10
|
$29.00 |
call |
 |
- You may change quantities from within your cart.
- If you do not wish to order online call us toll free at 877-275-9606 between the hours of 9-5 Eastern Standard time.
MicroDAQ.com accepts Visa, MasterCard and American Express

All prices are in U.S. Dollars.
No U.S. sales tax
|