PEL103 Power and Energy Data Logger w/ LCD Display
- Power (VA, W, var) & Energy (VAh, Wh, varh) Measurements on 50/60Hz, 400Hz and DC Systems
- Measurement Range of 100mA to 10,000 Amps with MiniFlex Current Sensors (Included)
- 4 Line LCD Display Shows 3 Phases Simultaneously on a Bright Blue Monochrome Backlit
- Store Measured Current and Voltage Readings onto SD(HC) Cards up to 32 GB
- RMS and DC Measurements of each Phase at 128 Samples per Cycle
- Bluetooth, USB and Ethernet LAN Communications Options for Setup and Configuration
- New! Android App to Connect, Configure, Setup, View Data Using Bluetooth or WiFi Communications
Includes Tool Bag, (3) MiniFlex Current Sensors, USB Cable, (4) Black Test Leads w/ Alligator Clips, AC Power Adapter, (12) Color-Coded ID Markers, Multifix Mounting System, Safety Card, 2 GB SD Card and USB-SD Card Reader, USB Memory Stick with User Manual and DataView PC Software
Overview of the AEMC PEL103 Power and Energy Data Logger
The AEMC PEL 103 power and energy data logger w/ LCD display is easy to use and cost-effective. It reads and records 1, 2 or 3-phase RMS voltage and current measurements. This three-phase power and energy data logger can be used by contractors, electricians and engineers engaged in system monitoring and upgrades. Data reports can be easily generated using the supplied standard reports which are fully customizable.
The slim design of the PEL 103 allows it and its current sensors to be mounted inside a panel while allowing the door to close in most cases. The logger measures and records three True RMS voltage and current inputs, Watts, VARS, VA, and Energy (kWh & kVA). The logger can use this data to calculate and record Power Factor (PF), Crest Factor, Displacement Power Factor (DPF), Frequency, and THD. Individual harmonic percent information, selectable from the 1 to the 50th harmonic, is also recorded.
AEMC 2137.52 PEL103 Power and Energy Data Logger Specifications
Input Channels | (3) Current Inputs via Custom 4 pin Jacks (3) Voltage Inputs via 4mm Safety Banana Jacks |
Voltage |
50/60 Hz: 42.5 Hz to 69 Hz @ ±0.1 Hz 400 Hz: 340 Hz to 460 Hz DC: 100 to 1000 VDC @ ±1% Reading ± 3 Volts (0.1V Resolution) |
50/60Hz Voltage (Single-Phase RMS) |
Measurement Range: 100 to 1000 rms Accuracy: ±0.2% of Reading ±0.2 Volts Resolution: 0.1 Volts |
50/60Hz Voltage (Phase to Phase RMS) |
Measurement Range: 100 to 2000 Vrms Accuracy: ±0.2% of Reading ±0.4 Volts Resolution: 0.1 Volts to 1.0 Volt |
400Hz Voltage (Single-Phase RMS) |
Measurement Range: 100 to 600 Vrms Accuracy: ±1% of Reading ± 1 Volt Resolution: 0.1 Volt |
400Hz Voltage (Phase to Phase RMS) |
Measurement Range: 200 to 1200 Vrms Accuracy: ±1% of Reading ±1 Volt Resolution: 0.1 Volts to 1.0 Volt |
DC Voltage (PT Ratios) |
Range: 50 Volts to 65,000 Volts (Programmable) Resolution: 0.01 Volts to 0.1 Volts |
Current | Sensor Type: MiniFlex Sensor Probe (#MA-193) 100mA - 100Arms: ±1% ±50mA @ 1-100mA Resolution 20A - 400Arms: ±1% ±0.2A @ 10 to 100mA Resolution 100A - 2000Arms: ±1% ±1A @ 0.1 to 1A Resolution 500A - 10,000Arms: ±1% @ 0.1 to 1A Resolution CT Ratios: Programmable 1:1 to 25,000:1 (Probe Dependent) |
Active Power | Measurement Range: -2 to 2GW Accuracy: ±0.5% of Reading ±0.005% Pnom Resolution: 0.001W |
Reactive Power | Measurement Range: -2 to 2Gvar Accuracy: ±1% of Reading ±0.01% Qnom Resolution: 0.001var |
Apparent Power | Measurement Range: 0 to 2GVA Accuracy: ±0.5% of Reading ±0.005% Snom Resolution: 0.001VA |
Power Factor | Measurement Range: -1 to 1 Accuracy: ±0.05 Resolution: 0.001 |
Tangent (active/reactive power ratio) | Measurement Range: -3.2 to 3.2 Accuracy: ±0.02 Resolution: 0.001 |
Active Energy | Measurement Range: 0 to 4 x 1018 Accuracy: ±0.5% of Reading Resolution: 1Wh |
Reactive Energy | Measurement Range: 0 to 4 x 1018 Accuracy: ±2% of Reading Resolution: 1varh |
Apparent Energy | Measurement Range: 0 to 4 x 1018 Accuracy: ±0.5% of Reading Resolution: 1Vah |
Total Harmonic Distortion (THD) | ±655% |
Individual Harmonics | 1 to 50 Displayed in Percentage; 1 to 7 at 400Hz |
Sampling Frequency | 50/60 Hz: 128 Samples per Cycle 400 Hz: 16 Samples per cycle |
Data Storage Rate | 1 per Second |
Demand Period Storage Rate | 1, 2, 3, 4, 5, 6, 10, 12, 15, 20,30 and 60 Minutes (User Selectable) |
Recorded Parameters | V, I, W, VA, var, PF, Tan, Wh, Vah, varh, THD (V and I), Individual Harmonics (1 to 50 per Phase), Crest Factor (CF), Cos f / DPF |
Event Log | Tracks and Records Status Changes and Error Messages Along with Recorded Data |
LED Indicators | Bluetooth Active, Recording Status, Phase Connection Reversal, Overload, Battery Status, and SD Card Status |
Data Storage Capacity | 2GB SD Card (Included) NOTE: SD Cards (up to 2 GB); SDHC Cards (4 to 32 GB) Formatted FAT32 are Supported |
Communication Ports | USB 2.0, Ethernet (RJ45), Wireless Bluetooth Class 1 NOTE: Class II Bluetooth Range is Restricted to 40 ft. Computers without Bluetooth will require a Bluetooth Radio Adapter |
Display | Type: 4 Line Monochrome Backlit LCD w/ Adjustable Brightness and Contrast Dimensions: 67mm x 55mm (2.63" x 2.16") NOTE: Display Available with PEL103 Version Only |
Power Source | Rechargeable 8.4 Volt NiMH Battery Pack (5 Hour Charge Time) |
Battery Life | NOTE: Battery Life Depends on Measurement Environment, Recording Interval and Battery Performance |
Case | Double Insulated, Rubber Over Molded, Polycarbonate UL94 V1 Rated / IP54 (Non Operating) |
Mounting | Embedded Magnets on Back Side, Keyhole Slot on Back Side |
Security | Kensington Anti-theft System |
Software | DataView Software (Included) |
OS Compatibility | Windows 11, 10 and 7 (32 and 64 Bit) |
Operating Environment | Temperature: 0°C to 50°C (32°F to 122°F) Humidity: 0 to 85% RH |
Standards Compliance | IEC 61010-1:Ed3 IEC61010-2-030:Ed1 for 1000 Volt CAT III / 600 Volt CAT IV; Polution Degree 2; CE |
Weight | <1 kg |
Dimensions | 256mm x 125mm x 37mm (10.08" x 4.92" x 1.46") |