PowerPad III Model 8336

AEMC 3-Phase Power Quality Analyzer
SKU
2136.30
$5,367.50
  • Measures TRMS Voltages up to 1000 Vrms AC or 1200 VDC for 1, 2 and 3-phase Systems
  • Measures TRMS Current up to 10 kArms (Sensor Dependent)
  • (4) Voltage Inputs and (3) Current Inputs
  • Stores Trend Data, 4,000 Alarms, 51 Captured Transients and up to 12 Screen Snap Shots
  • VA, var, W, kVAh, VARh, kWh and Totals (per Phase) Measurements and Recordings

Includes (4) Black 10ft Voltage Leads, (4) Black Alligator Clips, (12) Color-Coded Input ID Markers, NiMH Battery, 110/240 V Power Adapter with US Power Cord, Carrying Bag, Soft Carrying Pouch and USB Stick with Software and User Manual

Special order - typical lead time is 2-4 weeks, however there may be shipping delays beyond our control

Overview of the AEMC PowerPad Model 8336 Power Quality Analyzer

The PowerPad Model 8336 is a 3-phase power quality analyzer that is easy to use and built with durability in mind. The 8336 takes true RMS single, two, and three phase measurements at 256 samples per cycle and features an easy-to-read color LCD screen. It can measure TRMS voltage up to 1000 Vrms AC or 1200 VDC. The 8336 has four current and five voltage input terminals and is IEC 6100-4-30 Class B and safety rated to 600V CAT IV. It displays and records voltage, current, and power harmonics to the 50th order, including direction, in real time. The 8336 can capture up to 210 transient that contain four cycles for each active input. Offered as a standalone device or with current probes. The 8336 is perfect for technicians and engineers to measure and carry out diagnostics and power quality work on single, dual, and three-phase networks.

AEMC PowerPad III Model 8336 Specifications

Input Terminals (5) Voltage
(4) Current
Inputs (4) Voltage
(4) Current
Voltage TRMS (AC+DC): 2 to 1000 Volts
Ratio: Up to 500kV
Current
(TRMS AC+DC)
MN93 Clamp: 500mA to 200Amps AC
MN193 Clamp: 0.005 to 100 Amps AC
SR193 Clamp: 1 Amp to 1000 Amps AC
AmpFlex or MA193 Clamp: 100mA to 10,000Amps AC
MR193 Clamp: 1 Amp to 1300Amps AC/DC
SL261 Clamp: 50mA to 100Amps AC/DC
Ratio: Up to 60kA
Data Storage Capacity 2 GB (Internal)
Frequency 40Hz to 69Hz
Distribution Systems 1P 2W, 1P 3W, 2P 2W, 2P 3W, 2P 4W, 3P 3W, 3P 4W and 3P 5W, 2 1/2 Element & Aron Meters
Power Values W, VA, var, VAD, PF, DPF, cos φ, tan φ
Energy Values Wh, VARh, VAh, VADh
Harmonics 1st to 50th Direction, Sequence
THD: 0 to 50, phase
Transients up to 210
Flicker (Pst & Plt) Yes
Inrush Mode Yes > 10 Minutes
Unbalance Yes
Recording Yes
Alarm Mode 40 types, 10,000 Recorded
Peak Yes
Phasor Display Automatic
Display Type: Color 1/4 VGA TFT Screen
Dimensions: 320 x 240, 148mm (Diagonal)
Snapshots 50
Power Supply 9.6 Volt NiMH Rechargeable Battery Pack (Included)
External AC Supply: 110/230 Volts AC ±10% (50/60 Hz)
Battery Life > 13 Hours; 25 Hours (Record Mode)
Communications USB
Languages Supports more than 27
Software DataView (Included)
OS Compatibility Windows 11, 10 and 7 (32 and 64 Bit)
Standards Compliance CE, IP50, IEC61010-4-30, 1000 V CAT III, 600 V CAT IV
Weight 1.95 kgrams (4.3 lbs)
Dimensions 24.0cm x 18.0cm x 5.5cm (9.8" x 7.8" x 2.6")
Customer Questions
Is the software compatible with Windows 10?
Yes, it will work with Windows10
need for 3000amps
This device can measure up to 10,000 amps with the use of the AmpFlex or MA193 current clamps (both purchased separately).
Please, mind that only logged in users can submit questions
Copyright © 2024 MicroDAQ, LLC. All Rights Reserved.