SR604 AC Current Probe

AEMC Probe w/ Large Jaw Opening Accomodates up to (2) 500MCM Conductors
SKU
2113.44
$236.55
  • Measurement Range of 100mA to 1200AAC
  • Transformation, Low Phase Shift and Broad Frequency Response
  • High Quality Magnetic Cores and Uniform Windings Provide Sensitivity for Low and 1200AAC Measurements
  • Provides Current Outputs in mA/A for DMMs, Data Loggers and Power Meters with Current Ranges
Special order - typical lead time is 2-4 weeks, however there may be shipping delays beyond our control

Overview of the AEMC SR604 AC Current Probe

The SR604 is a general-purpose AC current probe with a measurement range of 0.1 to 1000A AC. It is designed to be used with DMMs, data loggers, and any other instruments that have a current input. It has a 1000:1 ratio and output of 1mA per amp measured at the jaw. The SR604 has an integrated 5’ lead which is terminated with shrouded banana plugs. The rounded jaw design of this probe makes it perfect for any application where high accuracy and low phase shift are required.

AEMC 2113.44, SR604 AC Current Probe Specifications

Nominal Range 1000A
Measurement Range 0.1 to 1200A
Transformation Ratio 1000: 1
Output Signal 1mAAC/AAC: 1AAC @ 1000A
Accuracy
(1000A Range)
0.1 to 10A: ≤3% + 0.1A
50A: 1.5% of Reading
200A: 0.75% of Reading
1000A: 0.5% of Reading
1200A: 0.5% of Reading
Phase Shift
(1000A Range)
50A: 1.5°
200A: 0.75°
1000A: 0.5°
1200A: 0.5°
Overload 1200A for 40 Min On, 20 Min OFF
Frequency Range 30Hz to 5kHz; Current Derating Above 1kHz Using the Formula: 1000A x 1/F (in kHz)
Load Impedance 5Ω Max
Working/Common Mode Voltage 600 Volt Cat. III
Output Termination Lead
Operating Range Temperature: -14°F to 122°F (-10°C to 50°C)
Humidity: 0 to 85% RH @ 35°C
Storage Range Temperature: -4°F to 158°F (-20°C to 70°C)
Jaw Opening 2.25" (57mm) Max
Conductor Size 2.05" (52mm) Max
Bus Bar Size (1) 1.95" x 0.19" (50mm x 5mm) - Max
Polycarbonate Material Handles: Polycarbonate + ABS, Gray UL94 VO
Jaws: Polycarbonate, Red, UL94 VO
Double Insulation Yes
Standards Compliance CE, UL (USA and Canada), EN 61010-2-032
Dimensions 11.1cm x 21.6cm x 4.5cm (4.37" x 8.50" x 1.77")
Weight 1.21 lbs (550 grams)
Customer Questions
No Questions
Please, mind that only logged in users can submit questions
Copyright © 2024 MicroDAQ, LLC. All Rights Reserved.