MicroDAQ.com
Toll Free: 1-877-275-9606
(603) 746-5524
$5.99 Flat Fee Economy Shipping on Most Items Shipped in the Continental USA

You have no items in your shopping cart.

Subtotal: $0.00

Measurement Computing LGR-5327 High Speed 16-Channel Multifunction Data Logger with 200 kS/s Sampling Rate

  • Measurement Computing LGR-5327 High Speed 16-Channel Multifunction Data Logger with 200 kS/s Sampling Rate


High Speed Multifunction 16-Channel Multifunction Data Logger w/ 200 kS/s Sampling Rate

Measurement Computing Logger with Analog/Digital Triggering, Form C Relay and 4 Counter Channels

Part Number: LGR-5327

Be the first to ask a question about this product

Be the first to review this product


  • (16) Single-Ended Analog Inputs, (16) Digital Inputs and (4) Quadrature Counter Inputs

  • ±1 Volt, ±5 Volts, ±10 Volts and ±30 Volts Analog Input Measurement Ranges

  • SD Card for Data Storage and Loading Configuration Data onto Logger

  • Single 500 Volt Alarm Output with Trigger

  • Powered by 9 to 30 Volt External Power Adapter


Includes AC Power Adapter, USB Cable, 4 GB SD Card and DAQLog Software

Special order - please allow 6-8 weeks for this item to ship.

$1,890.00

Measurement Computing LGR-5327 16 Channel Multifunction Data Logger Specifications

Logging Rate 200 kHz (Maximum)
Mechanical Shock Operating: 50 g, 3 msec half sine; 30 g, 11 msec half sine; 3 hits per face for a total of 18 hits (18 hits at 50 g, 18 hits at 30 g)
Standard: IEC 60068-2-27
Random Vibration Frequency: 10 to 500 Hz
Vibration Level: 5 grms
Test Time: 100 Minutes/axis
Standard: IEC 60068-2-64
Memory Card Type: SD Memory Card
Storage Capacity: 32 GB (Max)
4GB SD Memory Card Included
One Touch
Logging Controls
Configuration Loading from SD Memory Card
Start/Stop Logging
Force Trigger/User Event
Device Reset
Control of Status LEDs
LEDs Instant Logging
Tigger Status
Activity State
Power 9 Volt to 30 Volt External Power Supply
Operating Range Temperature: 0 to 55°C
Humidity: 0 to 90% non-condensing
Storage Range Temperature: -40 to 85°C
Humidity: 0 to 90% non-condensing
OS Compatibility Windows 7, Vista, XP SP2+ (32-Bit or 64-Bit)
Dimensions 241.30mm x 127mm x 44.50mm (9.5" x 5.0" x 1.75")
Counters Type: Quadrature and Conventional (x1, x2, x4)
Channels: 4
Inputs: Phase A=/A-, Phase B+/B-, Index ±
Resolution: Fixed 32-bit or as Sized by Modulo Register
Count Modes: Quadrature, Up/Down, Period/Frequency, Modulon
De-Bounce Times (Programmable): 16 Steps from 500 ns to 25 ms; positive or negative edge sensitive; glitch detect mode or de-bounce mode
Time-Base Accuracy: 50 ppm
Receiver Type: Quad Differential Receiver
Configuration: Each Channel Consists of Phase A input, Phase B input and Index input; each input switch selectable as single-ended or differential
Differential: Phase A, Phase B and Index (+) inputs at user connector routed to (=) inputs of differential receiver. Phase A, Phase B and Index (-) inputs at user connector routed to (-) inputs of differential receiver.
Single-Ended: Phase A, Phase B and Index (+) inputs at user connector routed to (+) inputs of differential receiver. Phase A, Phase B and Index (-) inputs at user connector routed to ground. (-) Inputs of differential receiver routed to +3 Volt reference
Common Mode Input Voltage Range: ±12 Volts Max
Differential Input Voltage Range: ±12 Volts Max
Input Sensitivity: ±200 mV
Input Hystersis: 50 mV typical
Input Impedance: 12 kΩ minimum
Absolute Maximum Input Voltage: Differential, ±14 Volts Max
Triggers Multi-Channel Analog: Level-Sensitive Based on Acquired Data. Up to 16 Channels May be Used as Independant Trigger Sources
Digital Pattern Trigger: Trigger when a User-defined 1 to 16 Bit digital pattern is matched on the DIN0-DIN15 pins. Programmable mask bits.
Non-Pretrigger Acquisition: 100 ns Typical, 1µs max
Pretrigger Acquisition: 1 Scan Period Max
External Trigger Pulse Width: 1µs min
Internal Trigger Latency: 2 (1/per-channel Sample Rate)
Analog Input
A/D Converters 16-Bit Successive Approximation Type
Number of Channels 8 Differential/16 Single-Ended
Input Ranges ±1 Volts, ±5 Volts, ±10 Volts and ±30 Volts
Input Configuration Multiplexed
Absolute Max Input Voltage CH_x to AGND, ±38 Volt Max (Power ON/OFF)
Input Impedance 30 Volt Range: 1 MΩ (Power ON); 1GΩ (Power OFF)
All Other Ranges: 10 GΩ (Power ON); 1GΩ (Power OFF)
Input Leakage Current ±100 pA
Input Capacitance 30 Volt Range: 90 pf
10, 5, 1 Volt Range: 55 pf
Max Working Voltage Signal+Common Mode
30 Volt Range: ±30.05 Volts
10, 5, 1 Volt Range: ±10.2 Volts
Common Mode Rejection Ratio 30 Volt Range: 65 db min (fin=60 Hz)
All Other Ranges: 75 dB min (fin=60 Hz)
Crosstalk DC to 25 kHz, Adjacent Differential Mode Channels, -80 dB
ADC Resolution 16 Bits
Input Bandwidth 450 kHz Min (All Input Ranges)
Input Coupling DC
Warm-up Time 30 Minutes Minimum
Absolute Accuracy 0.07% FSR (All Ranges)
Noise 2 LSB rms (Differential Mode)
Digital Input
Input Type 16-Channel TTL
Input Voltage Range 0 to 28 Volts
Input Characteristics 47 kΩ pull-down resistor, 39.2 kΩ Series Resistor
Max Input Voltage Level 0 to 32 Volts (power ON/OFF)
Input Voltage Threshold Minimum High Level: 2.0 Volts Max
Maximum Low Level: 0.8 Volts Minimum
Event Logging Change of State, Pattern Recognition, Event Time Stamped Using Real Time Clock
Digital Output
Number of Outputs 1
Type Mechanical Relay, NEC ED2/EF2 Series
Relay Contact Configuration: 1 Form C
Resistance: 0.075 Ω
Operate Time: 3 mS (Excluding Bounce)
Release Time: 2 mS (Excluding Bounce)
Insulation Resistance: 1000 MΩ at 500 VDC
Switching Voltage: 220 Volts DC/250 Volts AC
Switching Current: 1.0 Amps
Carrying Current: 2.0 Amps

Customer Reviews

Write Your Own Review

You're reviewing: High Speed Multifunction 16-Channel Multifunction Data Logger w/ 200 kS/s Sampling Rate

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
Price
Quality
Value

There are no product questions yet.

Ask Your Question

  • Reload captcha

* Required Fields