USB-1208FS-PLUS USB-Based 8 Channel Data Acquisition Device
Measurement Computing 8 Input Channels and 50 kHz Measurement Speed USB DAQ
SKU
USB-1208FS-Plus
In Stock
$199.00
- High Speed USB Device with (8) 12-Bit Analog Inputs, (2) Analog Outputs, (16) Digital I/Os and (1) External Event Counter
- Analog Inputs are Software Configurable for (8) Single-Ended or (4) Differential Inputs
- Independent Digital Port Configuration for Input or Output
- 50 KS/s Aggregated Sampling Rate Over All Channels
- Powered by +5 Volt USB Power Supply (Self Powered)
Includes USB Cable and Measurement Computing DAQ Software Suite (DAQami, TracerDAQ, InstaCal, Universal Libraries for Windows, Android and NI LabVIEW) Available as a Download
Overview of the Measurement Computing USB-1208FS-PLUS 8-Channel DAQ Device
The Measurement Computing USB-1208-PLUS DAQ module offers 8 single-ended or 4 differential analog inputs, two analog outputs, 16 digital I/O, and one counter input. A fast 50 kS/s aggregate sample rate means you will have practically continuous data monitoring. You don’t even need a separate power supply as it can run entirely off a USB port. The Measurement Computing DAQ software suite is included for download for data analyzation
Measurement Computing USB-1208FS-PLUS DAQ Module Specifications
Analog Input | Number of Channels: 4 Differential, 8 Single-Ended (Software Selectable) A/D Converters: 12-Bit Successive Approximation Type Input Ranges: ±20V, ±10V, ±5V, ±4V, ±2.5V, ±2V, ±1.25V, ±1V Note: Software or Selectable on a Per-Channel Basis Throughput (Software Paced): 250 S/s typical, System Dependent Throughput (Hardware Paced): 50 kS/s Max Channel Gain Queue: Up to 8 Elements, Software-Selectable Channel and Range Input Impedance: 122 kΩ |
Analog Output | Number of Channels: 2 Resolution: 12-Bits, 1 in 4096 Output Ranges: 0 Volts to 5 Volts Slew Rate: 0.8 Volts/µs Typical Throughput (Software Paced): 250 S/s Single Channel typical, System Dependent Throughput (Hardware Paced): 50 kS/s max per Channel |
Digital Input/Output | Digital Type: CMOS Number of I/O: 16 Configuration: 2 Banks of 8, Port B is High-Current Drive Input High Voltage: 2.0 Volts Min, 5.5 Volts Absolute Max Input Low Voltage: 0.8 Volts Max, -0.5 Volts Absolute Min Output High Voltage: 4.4 Volts Min (Port A and B) Output Low Voltage: 0.1 Volts Max (Port A and B) |
External Trigger | Trigger Source (External Digital): TRIG_IN Trigger Mode: Edge or Level Sensitive; Software-Selectable for CMOS compatible Rising or Falling Edge, High or Low Level Trigger Latency: 10µs Max. Trigger Pulse Width: 1 µs Min Input Type: Schmitt Trigger, 47 kΩ Pull-Down to Ground Schmitt Hysteresis: 1.01 Volts typical, 0.6 Volts (Min); 1.5 Volts (Max) Input High Voltage Threshold: 2.43 Volts typical, 1.9 Volts (Min); 3.1 Volts (Max) Input High Voltage Limit: 5.5 Volts Absolute Max Input Low Voltage Threshold: 1.42 Volts typical, 1.0 Volts (Min); 2.0 Volts (Max) Input Low Voltage Limit: -0.5 Volts Absolute Min; 0 Volts Recommended |
External Clock Input/Output | Pin Type: Bidirectional Input Clock Rate: 50 kHz Max Clock Pulse Width: 1 µs min (Input); 5 µs min (Output) Input Type: Schmitt Trigger, 47 kΩ Pull-Down to Ground Schmitt Hysteresis: 1.01 Volts typical, 0.6 Volts (Min); 1.5 Volts (Max) Input High Voltage Threshold: 2.43 Volts typical, 1.9 Volts (Min); 3.1 Volts (Max) Input High Voltage Limit: 5.5 Volts Absolute Max Input Low Voltage Threshold: 1.42 Volts typical, 1.0 Volts (Min); 2.0 Volts (Max) Input Low Voltage Limit: -0.5 Volts Absolute Min; 0 Volts Recommended Output High Voltage: 4.4 Volts Min. Output Low Voltage: 0.1 Volts Min |
Counter | Counter Type: Event Counter Number of Channels: 1 Resolution: 32 Bits Input Frequency: 1 MHz Max Input Type: Schmitt Trigger, 47 kΩ Pull-Down to Ground Schmitt Hysteresis: 1.01 Volts typical, 0.6 Volts (Min); 1.5 Volts (Max) Input High Voltage Threshold: 2.43 Volts typical, 1.9 Volts (Min); 3.1 Volts (Max) Input High Voltage Limit: 5.5 Volts Absolute Max Input Low Voltage Threshold: 1.42 Volts typical, 1.0 Volts (Min); 2.0 Volts (Max) Input Low Voltage Limit: -0.5 Volts Absolute Min; 0 Volts Recommended Pulse Width: 50 ns Min (High and Low) |
USB Communications | Type: USB 1.1 Low-Speed Compatibility: USB 1.1 and USB 2.0 Cable Length: 3 Meters Max |
Power Source | USB Port, No External Power Connection |
Operating Range | Temperature: 0° to 70°C Humidity: 0 to 90% RH Non-Condensing Max |
Storage Range | Temperature: -40°C to 70°C Humidity: 0 to 90% RH Non-Condensing Max |
OS Compatibility | Windows 11, 10 and 7 (32 and 64-Bit) for Universal Library, LabVIEW |
Dimensions | 79mm x 82mm x 27mm (3.20" x 3.10" x 1.05") |
Customer Questions