MicroDAQ.com
Toll Free: 1-877-275-9606
(603) 746-5524
$5.99 Flat Fee Economy Shipping on Most Items Shipped in the Continental USA

You have no items in your shopping cart.

Subtotal: $0.00

Measurement Computing USB-1408FS-PLUS USB Data Acquisition DAQ Module



USB-1408FS-PLUS USB-based 8 Channel DAQ Module

Measurement Computing USB-based DAQ module with 8 analog input channels, up to 14-bit resolution, 48 kS/s, two D/A outputs and 16 DIO bits

Part Number: USB-1408FS-PLUS

Ask a question (1)

Be the first to review this product


  • High Speed USB Device with (8) Analog Inputs, (2) Analog Outputs, (16) Digital I/Os and (1) External Event Counter

  • Analog Inputs are Software Configurable for (8) Single-Ended or (4) Differential Inputs

  • Independent Digital Port Configuration for Input or Output

  • 32-bit Counter Can Count TTL Pulses

  • Powered by +5 Volt USB Power Supply (Self Powered)


Includes USB Cable and Measurement Computing DAQ Software Suite (TracerDAQ, InstaCal, Drivers for DASYLab and Universal Library for LabView and Android) Available as a Download

$259.00

Measurement Computing USB-1408FS-PLUS DAQ Module Specifications

Analog Input Number of Channels: 4 Differential, 8 Single-Ended (Software Selectable)
A/D Converters: 12-Bit Successive Approximation Type
Input Ranges: ±20V, ±10V, ±5V, ±4V, ±2.5V, ±2V, ±1.25V, ±1V
Note: Software or Selectable on a Per-Channel Basis
Throughput (Software Paced): 250 S/s typical, System Dependent
Throughput (Hardware Paced): 48 kS/s Max
Channel Gain Queue: Up to 8 Elements, Software-Selectable Channel and Range
Input Impedance: 122 kΩ
Analog Output Number of Channels: 2
Resolution: 12-Bits, 1 in 4096
Output Ranges: 0 Volts to 5 Volts
Slew Rate: 0.8 Volts/µs Typical
Throughput (Software Paced): 250 S/s Single Channel typical, System Dependent
Throughput (Hardware Paced): 50 kS/s max per Channel
Digital Input/Output Digital Type: CMOS
Number of I/O: 16
Configuration: 2 Banks of 8, Port B is High-Current Drive
Input High Voltage: 2.0 Volts Min, 5.5 Volts Absolute Max
Input Low Voltage: 0.8 Volts Max, -0.5 Volts Absolute Min
Output High Voltage: 4.4 Volts Min (Port A and B)
Output Low Voltage: 0.1 Volts Max (Port A and B)
External Trigger Trigger Source (External Digital): TRIG_IN
Trigger Mode: Edge or Level Sensitive; Software-Selectable for CMOS compatible Rising or Falling Edge, High or Low Level
Trigger Latency: 10µs Max.
Trigger Pulse Width: 1 µs Min
Input Type: Schmitt Trigger, 47 kΩ Pull-Down to Ground
Schmitt Hysteresis: 1.01 Volts typical, 0.6 Volts (Min); 1.5 Volts (Max)
Input High Voltage Threshold: 2.43 Volts typical, 1.9 Volts (Min); 3.1 Volts (Max)
Input High Voltage Limit: 5.5 Volts Absolute Max
Input Low Voltage Threshold: 1.42 Volts typical, 1.0 Volts (Min); 2.0 Volts (Max)
Input Low Voltage Limit: -0.5 Volts Absolute Min; 0 Volts Recommended
External Clock Input/Output Pin Type: Bidirectional
Input Clock Rate: 48 kHz Max
Clock Pulse Width: 1 µs min (Input); 5 µs min (Output)
Input Type: Schmitt Trigger, 47 kΩ Pull-Down to Ground
Schmitt Hysteresis: 1.01 Volts typical, 0.6 Volts (Min); 1.5 Volts (Max)
Input High Voltage Threshold: 2.43 Volts typical, 1.9 Volts (Min); 3.1 Volts (Max)
Input High Voltage Limit: 5.5 Volts Absolute Max
Input Low Voltage Threshold: 1.42 Volts typical, 1.0 Volts (Min); 2.0 Volts (Max)
Input Low Voltage Limit: -0.5 Volts Absolute Min; 0 Volts Recommended
Output High Voltage: 4.4 Volts Min.
Output Low Voltage: 0.1 Volts Min
Counter Counter Type: Event Counter
Number of Channels: 1
Resolution: 32 Bits
Input Frequency: 1 MHz Max
Input Type: Schmitt Trigger, 47 kΩ Pull-Down to Ground
Schmitt Hysteresis: 1.01 Volts typical, 0.6 Volts (Min); 1.5 Volts (Max)
Input High Voltage Threshold: 2.43 Volts typical, 1.9 Volts (Min); 3.1 Volts (Max)
Input High Voltage Limit: 5.5 Volts Absolute Max
Input Low Voltage Threshold: 1.42 Volts typical, 1.0 Volts (Min); 2.0 Volts (Max)
Input Low Voltage Limit: -0.5 Volts Absolute Min; 0 Volts Recommended
Pulse Width: 50 ns Min (High and Low)
USB Communications Type: USB 1.1 Low-Speed
Compatibility: USB 1.1 and USB 2.0
Cable Length: 3 Meters Max
Power Source USB Port, No External Power Connection
Operating Range Temperature: 0° to 70°C
Humidity: 0 to 90% RH Non-Condensing Max
Storage Range Temperature: -40°C to 70°C
Humidity: 0 to 90% RH Non-Condensing Max
OS Compatibility Windows 8,7, Vista (32-Bit or 64-Bit) for Universal Library, LabView
Android for UL for Android
MCC Software is Available as Download directly from the Manufacturer
Dimensions 79mm x 82mm x 27mm (3.20" x 3.10" x 1.05")

You may also be interested in the following product(s)

TracerDAQ Pro Software

TracerDAQ Pro Software

  • Expands on the Capabilities of the TracerDAQ Basic that is Included with the Purchase of MCC DAQ Devices
  • Generate Square, Triangle, Flat, Pulse, Ramp, Random, and Arbitary Wave Forms from a Text File (.csv or .txt)
  • Set Duty Cycle, Phase, Gate Ratio and Rate Multiplier Options
  • Enable a Linear or Exponential Sweep of the Waveform
  • Generate Waves up to 20 Counter Output Channels in Rate Generator

Compatible with Windows 8, 7, Vista, XP (32-bit and 64-Bit Versions)

Download Only! Once Purchased a Download Link will be Emailed.

Learn More
$199.00

Customer Reviews

Write Your Own Review

You're reviewing: USB-1408FS-PLUS USB-based 8 Channel DAQ Module

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
Price
Quality
Value

  • Answer:

    While we can't speak to specific items sold under that particular supplier we can say that it's been our experience that most of their offering is simply rebranded versions of the same products sold under the MFG name.

    Basically the –Plus is an updated model with some enhancements. 1) The analog outputs now output a 0-5 volt signal versus the older 0-4096 (4.096 volts) and have an update rate of 50K versus 10K. 2) The digital I/O bits can now source or sink ±24 mA per pin Port B, ±6.0 mA per pin Port A versus +- 6.0 mA for all ports. 3) Added additional software support for the –Plus model

Leave a Reply

  • Reload captcha

Ask Your Question

  • Reload captcha

* Required Fields