USB-2416-4AO Isolated, High-Channel Multifunction Data Acquisition DAQ Device w/ 4 Analog Outputs
Measurement Computing USB-2416 Series Temprature and Voltage Data Acquisition Measurement Device
SKU
USB-2416-4AO
$1,499.00
- (32) Single-Ended or (16) Differential Analog Inputs, (4) Analog Outputs, (8) Digital I/O and 2 Counter Inputs
- 1 kS/s Sampling Rate Aggregated Over All Analog Input Channels
- Software Selectable Measurement Ranges from ±0.78 Volts to ±10 Volts
- Software Compatible with Windows 11, 10 and 7 Operating Systems
- Powered by 5 Volt DC, 10 Watt Power Supply (Included)
Includes USB Cable, 5V Power Adapter and Measurement Computing DAQ Software Suite (DAQami, TracerDAQ, InstaCal, Universal Libraries for Windows, Android and NI LabVIEW) Available as a Download
Due to product shortages lead times on most Measurement Computing orders will range from 7-16 weeks.
Overview of the Measurement Computing USB-2416-4AO Isolated Multi-Function DAQ Device
For higher channel count applications where you need to measure thermocouples or voltage, use the USB-2416-4AO high-channel multifunction data acquisition DAQ device from Measurement Computing. The DAQ comes with 32 SE/16 DIFF analog inputs. It has 4 analog outputs, 8 digital I/O and 2 counter inputs. The device’s analog input channels can be expanded up to 64 SE/32 DIFF using the AI-EXP32 multiplexer-based channel expansion module.
Measurement Computing USB-2416-4AO DAQ Module Specifications
Analog Input | Number of Channels: 32 (Single-Ended); 16 (Differential) A/D Converter: ADS1256, Sigma Delta A/D Resolution: 24-Bit Input Isolation: 500 Volts DC Min NOTE: Between Field Wiring and USB Interface Throughput (Single Channel): 2.5 Hz to 1102.94 Hz (1.1kS/s), Software-Selectable Throughput (Multiple Channel): 0.16 Hz to 1102.94 Hz (1.1kS/s), Software-Selectable NOTE: Throughput Rate is Aggregated Over All Channels Being Used Channel Configuration: Temperature Sensor Input, Software Programmable to Match Sensor Type; Voltage Input Input Voltage Range (Thermocouple Mode): ±0.078125 Volts Input Voltage Range (Voltage Mode): ±20 Volts, ±10 Volts, ±5 Volts, ±2.5 Volts, ±1.25 Volts, ±0.625 Volts, ±0.3125 Volts, ±0.15625 Volts, ±0.078125 Volts - Software Configurable Input Impedance: 2 GΩ (power On); 390 Ω (Power Off) Input Capacitance: 590 pf |
Analog Voltage Output | Digital to Analog Converter: DAC8555 Number of Channels: 4 Resolution: 16 Bits Output Ranges: ±10 Volts (Calibrated); ±10.5 Volts (Uncalibrated) Output Noise: 30 µVrms Slew Rate: 1.0 Volts/µs Throughput (Single-Channel): 1000 S/s Max, System-Dependent Throughput (Multi-Channel): 1000 S/s /#ch max, System-Dependent |
Digital Input/Output | Number of Input/Outputs: 8 Input Voltage Range: 0 to 15 Volts Input Type: CMOS Schmitt Trigger Input Characteristics: 47 kW Pull-Up/Pull-Down Resistor, 28 kW Series Resistor Schmitt Hysteresis: 0.4 Volts (Min); 1.2 Volts (Max) Transfer Rate (Software Paced): 500 Port Reads or Single Bit Reads per Second Typical Input High Voltage: 1.3 Volts (Min); 2.2 Volts (Max) Input Low Voltage: 1.5 Volts (Max); 0.6 Volts (Min) |
Digital Output | Number of Outputs: 8 Channels Output Characteristics: 47 kΩ Pull-Up, Open Drain (DMOS Transistor) Transfer Rate (Software Paced): Digital Output - 500 Port Writes or Single Bit Writes per Second Typical Off State Leakage Current: 0.1 µA Sink Current Capability: 150 mA Max (Continuous) Per Output Pin; 150 mA Max (Continuous) for all 8 Channels |
Counter Input | Number of Channels: 2 Resolution: 32-Bits Counter Type: Event Counter Input Type: Schmitt Trigger, Rising Edge Triggered Schmitt Hysteresis: 0.4 Volts (Min); 1.2 Volts (Max) Counter Read Rates (Software-Paced): 500 Reads per Second, Software Dependent Counter Writes Rates (Software-Paced): 500 Reads per Second, Software Dependent Input Voltage Range: ±15 Volts Max Input High Voltage: 1.3 Volts Min., 2.2 Volts Max. Input Low Voltage: 1.5 Volts Max., 0.6 Volts Min. Input Bandwidth (-3 dB): 1 MHz Input Capacitance: 25 pf Input Leakage Current: ±120 nA Input Frequency: 1 MHz Max. Pulse Width (High and Low): 500 ns |
USB Communications | Type: USB 2.0 Full-Speed Compatibility: USB 1.1 and USB 2.0 Cable Type: Standard A-B Cable Cable Length: 5 Meters Max Power: Self-Powered (No USB Current Consumed) |
Power Source | 5 Volts DC, 10 W Power Supply (Included) |
Operating Range | Temperature: 0° to 50°C Humidity: 0 to 90% RH Non-Condensing Max |
Storage Range | Temperature: -40°C to 85°C Humidity: 0 to 90% RH Non-Condensing Max |
OS Compatibility | Windows 11, 10 and 7 (32 or 64-Bit) for Universal Library, LabVIEW |
Dimensions | 245mm x 146mm x 50mm (9.65" x 5.75" x 1.97") |
Customer Questions