MicroDAQ.com
Toll Free: 1-877-275-9606
(603) 746-5524
$5.99 Flat Fee Economy Shipping on Most Items Shipped in the Continental USA

You have no items in your shopping cart.

Subtotal: $0.00

Measurement Computing BTH-1208LS Bluetooth and USB DAQ Device with 8 Analog Inputs, 2 Analog Outputs, 8 Digital IO and 1 Event Counter for Voltage, Counter, Digital I/O and Multi-functional Measurement Types

  • Measurement Computing BTH-1208LS Bluetooth and USB DAQ Device with 8 Analog Inputs, 2 Analog Outputs, 8 Digital IO and 1 Event Counter for Voltage, Counter, Digital I/O and Multi-functional Measurement Types


Bluetooth and USB Data Acquisition Device w/ 8 Analog Inputs

Measurement Computing Bluetooth and USB-based 8 Channel Data Acquisition Device

Part Number: BTH-1208LS

Be the first to ask a question about this product

Be the first to review this product


  • (8) Analog Inputs, (2) Analog Outputs, (8) Digital Inputs/Outputs and (1) Event Counter

  • Bluetooth (Paired with Host Device) and USB Operation Modes for Transmission of Data

  • Aggregated Sampling Rate up to 1 kS/s (Bluetooth - Continuous Scan) or 50 kS/s (USB or Bluetooth - Burst Mode) across all channels

  • Software Selectable Analog Input Ranges of ±10 Volts (Single-Ended) or up to ±20 Volts (Differential)

  • USB and Battery Powering Options with Battery Recharging Capability


Includes USB Cable and Measurement Computing DAQ Software Suite (DAQami, TracerDAQ, InstaCal, Universal Libraries for Windows, Android and NI LabVIEW) Available as a Download

$199.00

Measurement Computing BTH-1208LS Bluetooth DAQ Module Specifications

Analog Input A/D Converter: Successive Approximation Type
Channels: 8 (Single-Ended); 4 (Differential)
Input Voltage Range: ±10 V (SE); -10 to 20 V (Diff)
Input Impedance: 140 kΩ
Resolution: 11 Bits (Single-Ended); 12-Bits (Differential)
Throughput (Software Paced): 10 S/s (BT); 250 S/s (USB)
Throughput (Continuous Scan): 1024 S/s (BT); 50 kS/s (USB)
Throughout (Burst): 0.014 S/s to 50 kS/s to 12K Sample FIFO
NOTE: Bluetooth Transfer Rate to Host is Limited to 1024 S/s
Analog Output Channels: 2
Output Range: 0 Volts to 2.5 Volts
Resolution: 12 Bits
Throughput (Software Paced): 10 S/s
Slew Rate: 0.75 V/µs Typical
Digital Input/Output Number of I/O: 8 (Individually Configured)
Digital Type: 3.3 Volts Open Drain
Input Voltage Range: 0 to 5.5 Volts
Input Threshold: 2.0 Volts (High Voltage); 0.8 Volts (Low Voltage)
Input Limits: 5.5 Volts (High Voltage); -0.5 Volts (Low Voltage)
Output Voltage Range: 0 to 5.5 Volts (0 to 3.5 Volts with No External Pull Up Resistor)
External Trigger Trigger Mode: Software Configurable for Edge or Level Sensitive
Trigger Latency: 10 µs Max
Trigger Pulse Width: 1 µs Min
Input Type: Schmitt Trigger, 47 kΩ Pull-down to ground
Schmitt Trigger Hysteresis: 0.76 V; 0.4 V (Min); 1.2 V (Max)
Input Voltage Range: 0 to 5.5 Volts
Input Threshold: 1.74 Volts (High Voltage); 0.98 Volts (Low Voltage)
Input Limits: 5.5 Volts (High Voltage); -0.5 Volts (Low Voltage)
External Clock Input Input Clock Rate: 50 kHz Max
Clock Pulse Width: 1 µs Min
Input Type: Schmitt Trigger, 47 kΩ Pull-down to ground
Schmitt Trigger Hysteresis: 0.76 V; 0.4 V (Min); 1.2 V (Max)
Input Voltage Range: 0 to 5.5 Volts
Input Threshold: 1.74 Volts (High Voltage); 0.98 Volts (Low Voltage)
Input Limits: 5.5 Volts (High Voltage); -0.5 Volts (Low Voltage)
Counter Counter Type: Event Counter
Channels: 1
Input Type: Schmitt Trigger, 47 kΩ Pull-down to ground
Schmitt Trigger Hysteresis: 0.76 V; 0.4 V (Min); 1.2 V (Max)
Resolution: 32-Bit
Input Frequency: 1 MHz (Max)
Pulse Width: 500 ns (High); 500 ns (Low)
Schmitt Trigger Hysteresis: 0.76 V; 0.4 V (Min); 1.2 V (Max)
Input Threshold: 1.74 Volts (High Voltage); 0.98 Volts (Low Voltage)
Input Limits: 5.5 Volts (High Voltage); -0.5 Volts (Low Voltage)
Memory Non-Volatile EEPROM with 2048 bytes Storage
Power Source USB Port or (2) AA Alkaline, NiCd or NiMH Cells
Bluetooth Type: Bluetooth 2.1
Compatibility: Bluetooth 2.0, 1.2 and 1.1
Profile: Serial Port Porfile (SPP)
Note: The Bluetooth Radio is Disable when Device is Connected to a USB Host
USB Device Type: USB 2.0 Full Speed
Compatibility: USB 1.1 and USB 2.0
Cable Length: 3 Meters Maximum
Operating Range Temperature: 0 to 50°C
Humidity: 0 to 90% RH Non-Condensing
Storage Range Temperature: -40°C to 70°C
Humidity: 0 to 90% RH Non-Condensing
OS Compatibility Windows 10, 8, 7 and Vista (32-Bit or 64-Bit) for Universal Library, LabVIEW
Dimensions 14.6 cm x 8.1 cm x 2.71 cm (5.77" x 3.25" x 1.07")

Customer Reviews

Write Your Own Review

You're reviewing: Bluetooth and USB Data Acquisition Device w/ 8 Analog Inputs

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
Price
Quality
Value

There are no product questions yet.

Ask Your Question

  • Reload captcha

* Required Fields