8 Channel Temperature and Voltage Data Acquisition DAQ Module
SKU
USB-TEMP-AI
In Stock
$839.00
- (8) 24-Bit Analog Inputs for Voltage, Thermocouple, RTD, Thermistor and Semiconductor Sensor Probes
- (8) User-Configurable Digital I/Os Configured for Input or Output
- +/-10 Volt Measurement Range Input
- 2 Samples/second per Input Sampling Rate
Includes USB Cable and Measurement Computing DAQ Software Suite (DAQami, TracerDAQ, InstaCal, Universal Libraries for Windows, Android and NI LabVIEW) Available as a Download
Software Downloads
User Manuals and Product Guides
(Size: 0.01 MB)
This Document is Required to be Filled out by Anyone Outside the United States Purchasing a Measurement Computing Product.
Product Videos
Measurement Computing USB-TEMP-AI Data Acquisition DAQ Module Specifications
| Analog Input | Number of Channels: 4 Differential and Single-Ended (Voltage); 4 Differential (Temperature) Resolution: 24-Bits A/D Converter: Dual 24-Bit Sigma-Delta Throughput Rate: 2 Samples/second per Channel Input Isolation: 500 Volts DC Min NOTE: Between Field Wiring and USB Interface Channel Configuration: Temperature Sensor Input, Software Programmable to Match Sensor Type; Voltage Input Input Impedance (Thermocouple): 5 GΩ (Power On); 1 MΩ (Power Off) Input Impedance (Voltage): 10 GΩ (Power On); 2.4 kΩ (Power Off) Input Coupling: DC |
| Analog Input Ranges | Thermocouple: ±0.080 Volts RTD: 0 to 0.5 Volts Thermistor: 0 to 2 Volts Semiconductor Sensor: 0 to 2.5 Volts Voltage: ±10 Volts; ±5 Volts; ±2.5 Volts; ± 1.25 Volts - Software Selectable |
| Compatible Sensors | Thermocouple Type J: -210°C to 1200°C Thermocouple Type K: -270°C to 1372°C Thermocouple Type R: -50°C to 1768°C Thermocouple Type S: -50°C to 1768°C Thermocouple Type T: -570°C to 400°C Thermocouple Type N: -570°C to 1300°C Thermocouple Type E: -570°C to 1000°C Thermocouple Type B: 0°C to 1820°C RTD 100 Pt (DIN 43760): 0.00385 ohms/ohm/°C RTD 100 Pt (SAMA): 0.003911 ohms/ohm/°C RTD 100 Pt (ITS-90/IEC751): 0.0038505 ohms/ohm/°C Thermistor: Standard 2,252 Ω through 30,000 Ω Semiconductor/IC: TMP36 or Equivalent |
| Digital Input/Output | Digital Type: 5 Volt CMOS Number of Input/Outputs: 8 Configuration: Independently Configured for Input or Output; Power On Reset is Input Mode Digital Input Transfer Rate (Software Paced): 50 Port Reads or Single Bit Reads per Second Typical Digital Output Transfer Rate (Software Paced): 100 Port Writes or Single Bit Writes per Second Typical Input High Voltage: 2.0 Volts (Min); 5.5 Volts (Max) Input Low Voltage: 0.8 Volts (Max); -0.5 Volts (Min) Output High Voltage: 0.7 Volts Max Output Low Voltage: 3.8 Volts Min |
| Counter Input | Number of Channels: 1 Resolution: 32-Bits Counter Type: Event Counter Input Type: TTL, Rising Edge Triggered Schmitt Hysteresis: 20 mV to 100 mV Counter Read Rates (Software-Paced): 33 to 1000 Reads per Second, Software Dependent Counter Writes Rates (Software-Paced): 33 to 1000 Writes per Second, Software Dependent Input High Voltage: 4.0 Volts Min., 5.5 Volts Absolute Max. Input Low Voltage: 1.0 Volts Max., -0.5 Volts Absolute Min. Input Bandwidth (-3 dB): 1 MHz Input Capacitance: 25 pf Input Leakage Current: ±1.0 µA Typical Input Frequency: 1 MHz Max. Pulse Width (High and Low): 500 ns |
| USB Communications | Type: USB 2.0 Full-Speed Compatibility: USB 1.1 and USB 2.0 Cable Type: Standard A-B Cable Cable Length: 5 Meters Max Power: Self-Powered (No USB Current Consumed) |
| Power Source | 5 Volts DC, 10 W Power Supply (Included) |
| Operating Range | Temperature: 0° to 55°C Humidity: 0 to 90% RH Non-Condensing Max |
| Storage Range | Temperature: -40°C to 85°C Humidity: 0 to 90% RH Non-Condensing Max |
| OS Compatibility | Windows 11, 10 and 7 (32 and 64-Bit) for Universal Library, LabVIEW |
| Dimensions | 127mm x 88.9mm x 35.56mm (5.0" x 3.5" x 1.4") |
Customer Questions
Related Products
