WebDAQ 316 Internet Enabled Thermocouple Data Logger
SKU
WEBDAQ-316
In Stock
$1,259.00
- Stand-Alone Temperature Data Logger with Remote Monitoring and Control
- Built-in Web Interface for Configuring Applications, Logging Data, Update Digital Outputs, Send Alarm Email/SMS Notifications and View Real-Time Data
- (16) Thermocouple Inputs Isolated to 250 Volts and (4) Digital IOs for Triggers and Alarms
- Cold Junction Compensation (CJC) Enabled for All Channels and Auto Zero Support on a Single Channel to compensate for Offset Errors
- Ability to Export Recorded Data to csv format for Excel® and MATLAB®
Includes Ethernet Cable, Calibration Certificate, Quick Start Guide, AC Power Adapter with USA, UK and Europe Plugs
Measurement Computing WebDAQ 316 Internet Enabled Thermocouple Data Logger Specifications
Thermocouple Input | Number of Channels: 16 Thermocouple Inputs, 1 Internal Auto Zero Channel, 1 Internal CJC Channel ADC Resolution: 24 Bits Type of ADC: Delta-Sigma Sampling Mode: Scanned Voltage Measurement Range: ±78.125 mV Supported Thermocouple Types: J, K, T, E, N, B, R and S Input Bandwidth (High-Resolution Mode): 14.4 Hz Input Bandwidth (High-Speed Mode): 78 Hz High-Resolution Noise Rejection: 60 dB (50 and 60 Hz) Overvoltage Protection: ±30 Volts Between any 2 Inputs Differential Input Impedance: 78 MΩ Input Current: 50 nA Input Noise (High-Resolution Mode): 200 nVrms Input Noise (High-Speed Mode): 7 µVrms |
Digital Input/Output | Digital Type: CMOS (Schmitt Trigger) Input / Open Drain Output Number of I/O: 1 port of 4 bits Configuration: Bit-Configurable for Input or Output Schmitt Trigger Hysteresis: 0.6 Volts (Min); 1.7 Volts (Max) Pull-up Configuration: Each bit is pulled up to 5 Volts with a 100Ω Resistor Input Frequency Range: DC - 10kHz Input High Voltage Limit: 15 Volts Absolute Max Input Low Voltage Limit: -0.5 Volts Absolute Min, 0 Volts Recommended Min Input High Voltage Threshold: 1.9 Volts Min, 3.6 Volts Max Input Low Voltage Threshold: 2.3 Volts Max, 1.0 Volts Min |
Network Communications | Ethernet Type: 100 Base-Tx, 10-Base-T Communication Rates: 10/100 Mbps, Auto-Negotiated Connector: RJ-45, 8 Position Cable Length: 100 Meters (328 ft) Max IP Configuration: DHCP, link-local, Static |
USB Communications | Number of USB Ports: 2 (Connecting to Mass Storage Device or Similar) Type: USB 2.0 High-Speed Compatibility: USB 1.1, USB 2.0, USB 3.0 Cable Length: 3 Meters Max |
SD Memory Card Slot | Memory Card Type: SD, SDHC, SDXC, MMC, TransFlash File System Supported: FAT16, FAT32, exFAT, ext2/3/4, NTFS |
Push Buttons | Power (POWER): Turns the Device On or Off, or Forces the Device to Power Off Function (FUNC): Unmounts External Media, or Starts/Stops an Acquisition Reset (CONFIG RESET): Restores Network and Alarm Settings to Factory Default Values |
Power | Input Voltage: Center Positive. 6+ Volts DC to 16 Volts DC Input Wattage: 4 W typical, 10 W max External AC Adapter: 9 VDC, 1.2 Amps, 110 VAC to 240 VAC Input Range Battery: 1 3 Volt Button Cell Lithium Battery; Replaceable |
OS Compatibility | Windows 11, 10 and 7 (32 or 64-Bit) for Universal Library, LabVIEW |
Software | Control and Setup via Web Browser Interface (No Software Required) InstaCal (install, Configure and Test) TracerDAQ (Acquire, View, Log and Generate) |
Operating Environment | Temperature: 0°C to 50°C (32°F to 120°F) Humidity: 10% to 90% RH, non-condensing |
Storage Environment | Temperature: -40°C to 85°C (-40°F to 185°F) Humidity: 5% to 95% RH, non-condensing |
Other Environmental Factors | Maximum Altitude: 2,000 Meters (6,562ft) Polution Degree: 2 |
Standards Compliance | IP30 |
Weight | 635 grams (1.45 lb) |
Dimensions | 158.8mm x 146.1mm x 38.1mm (6.25" x 5.75" x 1.50") With Spring Terminal: 177.0mm x 146.1mm x 38.1mm (6.97" x 5.75" x 1.50") |
Customer Questions