The store will not work correctly when cookies are disabled.
Onset Crimp Sleeves
- (12) 3/8"-Long Stainless Steel Crimp Sleeves
- Use with 1/16" Teflon-Coated Stainless Steel Cable
Special order - please be advised that due to supply shortages, some items may require 6 weeks for shipment
- (12) 3/8"-Long Stainless Steel Crimp Sleeves
- Use with 1/16" Teflon-Coated Stainless Steel Cable
-
HOBO Freshwater Conductivity and Salinity Data Logger
U24-001
$985.00
- Non-contact Sensor Minimizes Drift-Related Measurement Errors
- Features Open Access to Sensor for Cleaning and Software-Based Drift Compensation
- Software Enables Start/End-Point Calibration to Compensate for Fouling and Easy Conversion to Specific Conductance and Salinity
- 0 to 15,000 µS/cm (Conductivity Extended Range) and 0°C to 40°C (Temperature) Measurement Ranges
- 3 Year Battery Life with Factory Replaceable Battery
- Stores at Least 14,400 Sets of Measured Readings
- Requires HOBOware Pro Software (Version 3.2+) and BASE-U-4 Optical Base Station
Designed for Fresh Water Sources. See the Onset U24-002-C for Saltwater Sources
-
HOBO Saltwater Conductivity and Salinity Data Logger
U24-002-C
$985.00
- Non-contact Sensor Minimizes Drift-Related Measurement Errors
- Also Features Open Access to Sensor for Cleaning and Software-Based Drift Compensation
- Software Enables Start/End-Point Calibration to Compensate for Fouling and Easy Conversion to Specific Conductance and Salinity
- 5,000 to 55,000 µS/cm (Conductivity Extended Range) and 5°C to 35°C (Temp) Measurement Ranges
- 3 Year Battery Life with Factory Replaceable Battery
- Stores at Least 14,400 Sets of Measured Readings
- Requires HOBOware Pro Software Download (Version 3.2+)
Designed for Saltwater Sources. See the U24-001 for Fresh Water Sources
-
HOBO Dissolved Oxygen Data Logger
U26-001
$1,395.00
- 0 to 30 mg/L (Dissolved Oxygen) and -5°C to 40°C (Temperature) Measurement Ranges
- ±0.2 mg/L (Dissolved Oxygen) and ±0.2°C (Temperature) Accuracy
- USB Optical Interface for High-Speed Reliable Data Offload in Wet Environments
- 3 Year Factory Replaceable Battery
- Stores at Least 21,700 Sets of Measured Readings
- Includes Dissolved Oxygen Sensor Cap, Protective Guard and Calibration Boot with Sponge
Requires HOBOware Pro Software Download (Version 3.3.1+) and Base Unit
-
Onset 3-Meter Tripod Kit
M-TPA-KIT
$369.00
This kit has everything you need for a 3-meter tripod configuration of the HOBO Weather Station or HOBO Micro Station.
- 3-meter tripod (M-TPA)
- Grounding Kit (M-GKA)
- Guy Wire Kit (M-GWA)
- 1/2" Stake Kit (M-SKA) for guy wires and tripod
- Mast Level (M-MLA)
-
Onset 2-Meter Tripod Kit
M-TPB-KIT
$259.00
This kit has everything you need for a 2-meter tripod configuration of the HOBO Weather Station or HOBO Micro Station.
- 2-meter tripod (M-TPB)
- Grounding Kit (M-GKA)
- Guy Wire Kit (M-GWA)
- 1/2" Stake Kit (M-SKA) for Guy Wires and Tripod
- Mast Level (M-MLA)
Copyright © 2024 MicroDAQ, LLC. All Rights Reserved.