HOBO Energy Logger
- Measure and Record AC/DC Current, Voltage, 4-20 mA, Power, Kilowatts, Pressure, Pulse and Analog Inputs, Wind, Rain, Light, Carbon Dioxide, Temperature and Humidity
- 15 Channel Inputs Supports Up to (3) FlexSmart Modules and (6) Smart Sensors
- Digital Connection of Smart Sensors to logger for Accurate, Reliable Data Collection and Storage
- Multiple Internal and External Power Sources Available for Long-Term Usage
- Includes User Manual, (8) 1.5 Volt Batteries, Miniature Slotted Screwdriver, Blank Labels and Rubber Feet
Requires FlexSmart Module, Smart Sensors and Downloadable HOBOware Software
Overview of the HOBO U22-001 Energy Data Logger
The Onset HOBO H22-001 is an energy data logger designed for monitoring energy and industrial equipment. The logger features 15 channels making it capable of utilizing a wide variety of pre-defined plug-and-play sensors. This versatile tool allows energy and facility managers to detect and address a wide range of issues related to HVAC, machinery, and other systems quickly and easily. The H22-001 is modular in design making it more economical than its alternatives because it replaces a toolbox full of individual data loggers. The H22-001 is configured and data is viewable using HOBOware (free) or HOBOware Pro (paid) software.
HOBO Energy Logger Specifications
Data Storage Capacity | 512K Maximum Storage - Number of Samples Dependant on External Sensors and FlexSmart Modules |
Sampling Rate | 1 Second to 18 Hours (2-Second Minimum for #S-FS-TRMSA operation) |
Sensor Excitation | 12 Volts DC at 200 mA total, with User-Programmable Warmup Time on a per-Channel Basis |
Logging Modes | Immediate, Timed Delay, or Push-Button Start Options |
Memory Modes | Stop When Full; Wrap When Full |
LED Indicators | Green: Logging or Standby Red: Low Battery, Storage or Sensor Fail |
Sensor Inputs | 3 FlexSmart multi-Channel Modules and up to 6 Smart Sensors |
Sensor Connectors | 6 RJ-12 Smart Sensor Jacks and 3 FlexSmart Module Slots |
Communications Type | RS-232 Serial via 3.5mm Serial Port or/and 9-pin D-Sub Connector |
Communications Mode | Current Readings while Logging; Read Out While Logging; Read Out When Stopped |
Operating Range | Alkaline Battery: -20C to 50C (-4F to 122F) Lithium Battery: -40C to 60C (-40F to 140F) |
Battery Life | 1 Year Typical Use ( up to 75 mA excitation with 10-minute or longer logging interval and 1-second warmup-time) |
Battery | AA Alkaline Batteries (Included) |
External Power | 13.6 VDC Regulated AC Wall Adapter Connector 9-12 VDC Regulated Wall Adapter (Remove Batteries) |
Time Accuracy | 0 to 2 Seconds for first data point and ±5 Seconds per Week at 25°C (77°F) |
Software Compatibility | HOBOware and HOBOware PRO Version 3.5+ |
OS Compatibility | Windows: Windows 11, 10 and 7 (32 and 64-Bit) Mac: OS X 10.9.x, 10.10.x and 10.11.x |
Standards Compliance | CE |
Weight | 435g (15.23 oz) with Batteries |
Dimensions | 15.6cm x 8.4cm x 4.6cm (6.13" x 3.31" x 1.81") |
-
Onset Barometric Pressure SensorS-BPB-CM50$299.00
- Automatic Communication of Configuration Information to Data Logger without Setup
- 12-Bit Resolution with Rugged, Outdoor Rated Weatherproof Housing
- 660 to 1070 mbar Measurement Range with ±3.0 mbar Accuracy
- 1.0 mbar Drift per Year
- 50 cm Cable Length
Includes (2) Cable Ties and (2) #8 Self Tapping Screws
-
Onset HOBO Barometric Pressure SensorS-BPA-CM10$189.00
- 660 mbar to 1070 mbar Measurement Range with ±3.0 mbar Accuracy
- Typical 0.6mbar Drift Per Year
- Needs Protection from Direct Exposure to Weather
- Dimensions: 1.75" x 1.875" x 0.625"
- Cable Length: 10 cm
Compatible with Onset U30 Monitoring Systems, H21-002 Micro Weather Station and H22 Energy Logger
-
Ultrasonic Wind Speed and Direction Smart SensorS-WCG-M003$1,099.00
- Ultrasonic Wind Speed and Direction Smart Sensor Has No Moving Parts
- Measurement Range of 0 to 92 mph (Wind Speed) and 0 to 359° (Wind Direction)
- Plug-in Modular Connector for Easy Installation
- Powered by a Built-in Solar Panel
- Compatible with Onset RX3000, U30, H21-USB and H22-001
-
Onset DC Voltage Input Adapter SensorS-VIA-CM14$109.00
- 0 to 5 Volts DC Measurement Range
- Measurement Accuracy: ±10 mV ±0.3% of Reading
- Resolution: ±1.221 millivolts
- Input impedance: 1 Megohms
- Ground connection: same for adapters and PC interface
-
Onset FlexSmart TRMS ModuleS-FS-TRMSA$125.00
- 15-Bit (2) Input Channels of AC Current or Voltage Measures TRMS
- Accurate Readings of Sinusoidal and Non-Sinusoidal WaveForms
- Accepts an Input Range of 5 mV to 512 mV
- 2-Wire Screw Terminals
-
Accu-CT Revenue Grade Split Core Current TransformerACTL-0750-005$77.00
- Easy to Open and Install with One Hand while Wearing Safety Gloves
- 333 mVolt AC Output at Rated Full Scale Current with No Shorting Blocks Required
- Low Phase Angle Error of ±0.50° from 1% to 120% of Rated Current
- ±0.75% from 1% to 120% of Rated Primary Current Accuracy
- 2.38" (W) x 2.40" (H) x 0.90" (T) with a 0.75" Window Opening
- 8 ft Conductor (White and Black), Twisted with 8 ft (2.4 Meters) Lead Length
Available in 5, 20, 50, 100, 200 and 250 Rated Amps
-
Onset 4-20 mA Input Adapter SensorS-CIA-CM14$105.00
- 4 to 20 mA Measurement Range
- Measurement Accuracy: ±40 µA ±0.3% of Reading
- Resolution: ±4.93 µA
- Input impedance: 124 ohms
- Provides a Trigger Signal for Controlling Power to Attached External Sensors
-
Mini Split Core Current TransformersT-MAG-0400-05$54.00
- Split-Core Design for Fast, Easy Installation
- Internal Precision Burden Resistor
- Output: 0.333 Volts AC at Rated Current
- 8 ft Twisted Pair, 22 AWG Leads
- Operates from 50 Hz to 400 Hz
Available in 5, 10, 20, 50 and 75 Rated Amps
-
AC Voltage Potential Transformer w/ 0 to 150 Volts RangeT-MAG-SPT-150$99.00
- Accurate Measurement of Sinusoidal and Non-Sinusoidal Waveforms
- Accuracy: ±1% (10% to 130% of Rated Voltage)
- Output Signal: 0.333 Volts at Rated Input Voltage
- Measurement Range: 0 to 150 Volts
-
Onset FlexSmart TRMS Module w/ Modular PlugS-FS-TRMSA-D$135.00
- 15-Bit (2) Input Channels of AC Current or Voltage Measures TRMS
- Accurate Readings of Sinusoidal and Non-Sinusoidal WaveForms
- Accepts an Input Range of 5 mV to 512 mV
- 2Wire Screw Terminals
-
Air Velocity and Temperature Remote Head SensorT-DCI-F350-W5A3$479.00
- Measures Air & Inert Gas Velocity and Ambient Temperature
- (3) Measurement Range Options: 0.15 to 1 m/s, 0.5 to 10 m/s and 1.0 to 20 m/s
- Output: 0 to 5 Volts DC
- Response Time: 400 ms
- Requires an Analog Input Option
-
Ashcroft Gauge Pressure SensorT-ASH-G2-100$269.00
- Precision Pressure Measurements in Compressed Air Systems, Water or Oter Gases and Fluids
- Accuracy: ±1% to 1.5% FS
- Connection: 1/4" NPT 305 Stainless Steel
- Output Signal: 0 to Volts DC, 3 Wire
- Available in 100 PSIG, 200 PSIG and 500 PSIG Pressure Ranges
Requires Analog Port Selection During U30 or RX3000 Series System Configuration and Use of a S-FS-CVIA when using the H22-001 Data Logger. When using a U12 or UX120 Series Data Loggers, this Sensor Requires a 0-5 VDC Analog Input Cable (CABLE-ADAP5) and External Power Provided by an AC Adapter (AC-SENS-1).
-
WattNode 347/600 VAC Wye kWh TransducerWNB-3Y-600-P$429.00
- True RMS AC Watt-Hour Transducer with Pulse Output Proportional to kWh Consumed
- Solid State Relay Closure
- Line to Neutral: 347 Volts AC
- Line to Line: 600 Volts AC
- Phases: 3
- Wires: 4
-
WattNode 277/480 VAC Wye kWh TransducerWNB-3Y-480-P$407.00
- True RMS AC Watt-Hour Transducer with Pulse Output Proportional to kWh Consumed
- Solid State Relay Closure
- Line to Neutral: 277 Volts AC
- Line to Line: 480 Volts AC
- Phases: 3
- Wires: 4
-
WattNode 277/480 VAC Delta kWh TransducerWNB-3D-480-P$429.00
- True RMS AC Watt-Hour Transducer with Pulse Output Proportional to kWh Consumed
- Solid State Relay Closure
- Line to Neutral: 277 Volts AC
- Line to Line: 480 Volts AC
- Phases: 3
- Wires: 3
-
WattNode 230/400 VAC Wye kWh TransducerWNB-3Y-400-P$407.00
- True RMS AC Watt-Hour Transducer with Pulse Output Proportional to kWh Consumed
- Solid State Relay Closure
- Line to Neutral: 230 Volts AC
- Line to Line: 400 Volts AC
- Phases: 3
- Wires: 4
-
WattNode 230/400 VAC Delta kWh TransducerWNB-3D-400-P$429.00
- True RMS AC Watt-Hour Transducer with Pulse Output Proportional to kWh Consumed
- Solid State Relay Closure
- Line to Neutral: 120 Volts AC
- Line to Line: 400 Volts AC
- Phases: 3
- Wires: 4
-
WattNode 208/240 VAC Wye kWh TransducerWNB-3Y-208-P$347.00
- True RMS AC Watt-Hour Transducer with Pulse Output Proportional to kWh Consumed
- Solid State Relay Closure
- Line to Neutral: 120 Volts AC
- Line to Line: 208 to 240 Volts AC
- Phases: 3
- Wires: 4
-
WattNode 208/240 VAC Delta kWh TransducerWNB-3D-240-P$407.00
- True RMS AC Watt-Hour Transducer with Pulse Output Proportional to kWh Consumed
- Solid State Relay Closure
- Line to Neutral: 120 Volts AC
- Line to Line: 208 to 240 Volts AC
- Phases: 3
- Wires: 3
-
Voltage Input Lead Set and CablesA-WNB-LEADSET$135.00
- Used to Wire a WattNode Terminal Block Connected to a WattNode KwH Transducer and Voltage Terminals in a Circuit Breaker Panel
- Prevents Mis-Wiring to KWH Transducer
- Designed for Single Phase (120 to 277 Volts AC) and 3 Phase (208 to 480 Volts AC) Circuits
- 25°C to 85°C Temperature Rating
- Electrical Rating: IEC 60101-031 @ 1000 Volts CAT II, 600 Volts CAT III P2
- Indulsted Nickel Plated Brass, Sheathed Banana Plug Receptable
- 5 ft Cable Length
- Includes (5) Alligator Clips with Matching Cable (Black, Blue, Green, Red and White)
-
Onset Silicon PyranometerS-LIB-M003$270.00
- Measure Solar Radiation Light Levels Using Silicon Pyranometer
- 0 to 1280 W/m2 Measurement Range over a Spectral Range of 300 to 1100 nm
- Records the Average Light Intensity over the Pre-Determined User-Set Logging Interval
- -40°C to 75°C Operating Temperature Range
- Housing Constructed of Anodized Aluminum and Acrylic Diffuser and O-Ring Seal
-
Onset PAR Photosynthetic Light SensorS-LIA-M003$279.00
- Measures the Light Range that Effects Photosynthesis (PAR - Photosynthetically Active Radiation)
- 400 nm to 700 nm Frequency Measurement Range with ±5 umol.m2/sec or ±5%
- -40°C to 75°C Operating Temperature Range
- Constructed of Anodized Aluminum Housing with Acrylic Diffuser and O-Ring Seal
Includes 3 Meter Cable Length
-
Contact Closure Pulse Input Adapter w/ 1 Meter Cable LengthS-UCD-M001$99.00
- Log and Records the Number of Contact Closures per Interval
- Plug-in Modular Connector
- 3.6 Volt Maximum Input
- Weatherproof PVC Housing
- Compatible with Onset HOBO U30 Data Loggers, HOBO Micro Station and HOBO Energy Logger
Includes (2) Wire Nuts and User Manual
-
Electronic Switch Pulse Input Adapter w/ 1 Meter Cable LengthS-UCC-M001$99.00
- Log and Records the Number of Switch closures per Interval
- Plug-in Modular Connector
- 3.6 Volt Maximum Input
- Weatherproof PVC Housing
- Compatible with Onset HOBO U30 Data Loggers, HOBO Micro Station and HOBO Energy Logger
Includes (2) Wire Nuts and User Manual
-
Rain Gauge Smart Sensor (0.01")S-RGE-M002$269.00
- New! AeroCone® Design for Better Measurement Accuracy in High-Wind Conditions
- Cost Effective way of Measuring Rainfall on HOBO Weather Stations
- Measurement Range of 0 to 10.2cm (0 to 4in.) per Hour
- Plug-in Modular Connector for Easy Installation
- Data Stored in Sensor & Automatically Communicates to Attached Data Logger (Sold Separately)
- Compatible with Onset RX3000, U30, H21-002 and H22-001
-
Rain Gauge Smart Sensor (0.2mm)S-RGF-M002$269.00
- New! AeroCone® Design for Better Measurement Accuracy in High-Wind Conditions
- Cost Effective way of Measuring Rainfall on HOBO Weather Stations
- Measurement Range of 0 to 10.2cm (0 to 4in.) per Hour
- Plug-in Modular Connector for Easy Installation
- Data Stored in Sensor & Automatically Communicates to Attached Data Logger (Sold Separately)
- Compatible with Onset RX3000 Series, U30, H21-USB and H22-001
-
Onset Rain Gauge Sensor (SAE)S-RGA-M002$529.00
- Measures Rainfall up to 5.0" (12.7 cm) per Hour and Accuracy of 1.0%
- Tipping Bucket Mechanism is Mounted on a Stainless Steel Shaft with Brass Bearings
- Constructed of Aluminum Housing and Collector
- Available in English or Metric Versions
- Includes 2 Meter Cable and Brackets for Post or Tripod Mount
-
Onset HOBO Temperature RH Smart Sensor w/ 2 Meter CableS-THC-M002$210.00
- 12-Bit 2 Channel Sensor for Humidity and Temperature Measurements
- Automatically Communicates Configuration Data to the Attached Data Logger (Sold Separately)
- -40°C to 75°C at 0 to 100% RH Measurement Range
- ±0.25°C (Temperature) and ±2.5% (RH) Accuracy
- Weatherproof Environmental Rating
- 2 Meter Cable Length
-
Onset HOBO Temperature Sensor w/ 2 Meter Cable LengthS-TMB-M002$110.00
- -40°C to 100°C (-40°F to 212°F) Measurement Range
- ±0.2°C Accuracy
- Automatically Communicates Configuration Data to the Attached Logger (Sold Separately)
- Stainless Steel Sensor Tip
- Cable Length: 2 Meters
-
Onset No-Lead Water Flow MeterT-MINOL-130-NL$245.00
- Measure Cold and Hot Water Flow Rates: 0.25 to 22.0 gpm
- Compatible with 3/4" Pipes and 1/2" and 1.0" with Step Downs and Step Ups (Sold Separately)
- Operating Range: 4.4"C to 82.2"C (40"F to 180"F)
- Dry Contact Reed Switch with 100mA Max Contact Rating
- 8 Digit Odometer, Meter Register May be Turned 360° for Easier Readings
- Lead Free Brass Meets the 2014 "Reduction of Lead in Drinking Water" Act Requirements
-
Onset Wind Direction SensorS-WDA-M003$429.00
- Research Grade Plug-and-Play Wind Direction Sensor
- 0 to 355 Degree (5 Degree Dead Band) Measurement Range
- Average Wind Wind Direction in Sampling Interval
- Injected Molded Housing & Vane with Static Dissipating Base
- Long Sensor Life withStainless Steel Ball Bearings and Static Dissipating Housing
An Full Cross Arm (#M-CAA) or Half Cross Arm #(M-CAB) is Required for Mounting
-
HOBO Wind Speed Smart SensorS-WSB-M003$299.00
- Uses 3-Cup Anemometer
- Plug-In Modular Connection
- Measurement Range: 0 to 76 m/s (0 to 170 mph)
- Accuracy: ±1.1 m/s (2.4 mph) or 4% of Reading Whichever is Greater
- Cable Length: 3 Meters
-
Wind Speed and Direction Smart SensorS-WCF-M003$369.00
- Cost Effective way of Measuring Wind Speed and Direction on HOBO Weather Stations
- Measurement Range of 0 to 170 mph (Wind Speed) and 0 to 355° (Wind Direction)
- Plug-in Modular Connector for Easy Installation
- Data Stored in Sensor & Automatically Communicates to Attached Data Logger (Sold Separately)
- Compatible with Onset RX3000, U30, H21-002 and H22-001
-
Wind Speed and Direction Smart Sensor SetS-WSET-B$699.00
- 2 Sensor Set Measuring Wind Speed and Wind Direction
- Measurement Range of 0 to 100 mph (Wind Speed) and 0 to 355%deg; (Wind Direction)
- Calculates Average Wind Speed, Highest 3-Second Wind Gust and Average Wind Direction
- Data Stored in Sensor & Automatically Communicates to Attached Data Logger (Sold Separately)
- Compatible with Indoor and Outdoor Environments with its Weatherproof Rating
Requires an Onset HOBO Full Cross Arm (Part #M-CAA) to Support Both Wind Sensors
-
Onset H22 Energy Logger Replacement Spares KitA-H22-SPARES-1$12.00
- Replacement Parts for the H22 Energy Data Logger
Compatible with Onset HOBO H22 Energy Data Logger
-
Onset 1 to 2 Sensor Communication Adapter with 5in Extension CableS-ADAPT-5$29.00
- Consumer-Grade UL-Listed Plastic 2 to 1 6-pin Adapter and 5" Extension Cable
-
Onset 1 to 6 Adapter for Smart SensorsS-ADAPT-6$139.00
- Connect up to 6 Smart Sensors in a Water-Resistant Enclosure to 1 Sensor Extension
-
Onset HOBO Din Mounting Feet KitA-H22-DINMOUNT-1$29.00
- Mounting Kit for Data Logger to Attach to Standard 32mm and 35mm DIN Rails
Compatible with Onset HOBO H22 Energy Data Logger
-
Onset H22 Mount Feet KitA-H22-MOUNT-1$14.00
- Permanent Mounting Using 3/8 Flathead Screws (Included)
Compatible with Onset HOBO H22 Energy Data Logger