Home /
Onset HOBO UX120-006M 4-Channel Analog Data Logger

Onset HOBO UX120 4-Channel Analog Input Data Logger

| Add to Compare

Onset HOBO UX120-006M 4-Channel Analog Data Logger

Part Number: UX120-006M

Ask a question (3)

1 Review(s) | Add Your Review

4 External Inputs for Measuring and Recording Multiple Parameters

LCD Display Shows Current Readings, Alarm, Battery and Operating Status

User-Selectable Sampling Rate of 1 Second to 18 Hours

User-Replaceable AAA Alkaline or Lithium Batteries with 1 Year Life @ 1 Minute Sampling Rate

Stores up to 1.9 Million Readings

Includes Command Strip, Double-Sided Tape, Hook & Loop Strap and (2) AAA 1.5 Volt Alkaline Batteries

Requires Type A to Mini B Standard USB Cable (CABLE-USB), HOBOware (Free Download Version) or HOBOware Pro (Paid Download Version) Software.

Availability: In stock

$139.00

Qty:

Onset HOBO® UX120-006M 4-Channel Analog Data Logger Specifications

Data Channels	(4) External Inputs for Multiple Parameters
Analog Inputs	Number of Inputs: 4 Measurement Range: 0 to 20.1mA (w/ CABLE-4-20MA) 0 to 2.5V (w/ CABLE-2.5-STEREO) 0 to 5V (w/ CABLE-ADAPT5) 0 to 10V (w/ CABLE-ADAPT10) 0 to 24V(w/ CABLE-ADAPT24) Accuracy: 4-20mA Ã‚Â±0.001mA Ã‚Â±0.2% of Reading (w/ CABLE-4-20MA) ±0.1 mV Ã‚Â±0.01% of Reading (w/ CABLE-2.5-STEREO) ±0.2 mV Ã‚Â±0.03% of Reading (w/ CABLE-ADAPT5) ±0.4 mV Ã‚Â±0.03% of Reading (w/ CABLE-ADAPT10) ±0.1 mV Ã‚Â±0.03% of Reading (w/ CABLE-ADAPT24) Resolution: 0.3Ã‚ÂµA 4-20mA (w/CABLE-4-20MA) 40Ã‚ÂµV (w/CABLE-2.5-STEREO) 80Ã‚ÂµV (w/CABLE-ADAPT5) 160Ã‚ÂµV (w/CABLE-ADAPT10) 384Ã‚ÂµV (w/CABLE-ADAPT24)
Data Storage Capacity	1.9 Million Temperature Readings
Sampling Rate	1 Second to 18 Hours (User-Specified)
Display	Type: LCD Refresh Rate: 15 Seconds Note: Display is Visible from 0°C to 50°C (32°F to 158°F) Display May React Slowly or Go Blank in Temperatures Outside this Range.
Power Source	(2) AAA 1.5 Volt Alkaline or Lithium Batteries
Battery Life	1 Year @ 1 Minute Sampling Rate (Dependant Upon Environment and Operating Range)
Alarms	Visual High and Low Alarm Thresholds Displayed on LCD and Set via Software
Time Accuracy	±1 Minute per Month @ 25°C (32°F to 122°F)
Resolution	16 Bit
Communications	USB Connection to Setup Data Logger and Download Data
Logging Modes	Normal, Burst or Statistics
Data Storage Modes	Stop When Full or Wrap/Overwrite When Full (FIFO)
Start Modes	Immediately, Push Button, Date & Time or Next Interval
Restart Mode	Push Button
Stop Modes	When Data Storage Full, Push Button or Date & Time
Software Compatibility	HOBOware and HOBOware PRO Version 3.5+
OS Compatibility	Windows: Windows 10, 8.1, 8 and 7 Mac: OS X 10.9.x, 10.10.x and 10.11.x
Operating Range	Temperature: -20°C to 70°C (-4°F to 158°F) Humidity: 0 to 95% RH (non-condensing) Launch/Readout: 0°C to 50°C (32°F to 122°F) per USB Specification
Standards Compliance	CE, IP50
Weight	107.5 grams (3.79 oz.)
Dimensions	10.8 cm x 5.41 cm x 2.54 cm (4.25" x 2.13" x 1.0")

You may also be interested in the following product(s)

	Onset HOBO 4-20 mA Input Cable - CABLE-4-20MA Cable for Connecting Sensor with 4-20mA Output to HOBO U12, UX120 or ZW Series External-Channel Data Logger Length: 18.5" Use in Outdoor and Indoor Environments Learn More	$25.00
	CTV-A 0-20 Amp split-core AC Current Sensor Log AC Current in the 0 to 20 Amp Range 600 Volts AC Rating Constructed of Molded Plastic for Indoor Use Window Size: 1.10" x 0.90" Dimensions: 2.9" x 2.58" x 1.04" Learn More	$95.00
	CTV-B 0-50 Amp split-core AC Current Sensor Log AC Current in the 0 to 50 Amp Range 600 Volts AC Rating Constructed of Molded Plastic for Indoor Use Window Size: 1.10" x 0.90" Dimensions: 2.9" x 2.58" x 1.04" Learn More	$95.00
	CTV-C 0-100 Amp Split-Core AC Current Sensor Log AC Current in the 0 to 100 Amp Range 600 Volts AC Rating Constructed of Molded Plastic for Indoor Use Window Size: 1.10" x 0.90" Dimensions: 2.9" x 2.58" x 1.04" Learn More	$95.00
	CTV-D 0-200 Amp Split-Core AC Current Sensor Log AC Current in the 0 to 200 Amp Range 600 Volts AC Rating Constructed of Molded Plastic for Indoor Use Window Size: 1.54" x 1.26" Dimensions: 3.92" x 4.72" x 1.14" Learn More	$120.00
	ConLab AC Voltage Transmitter Sensors Self-Powered Transformer for Monitoring Sine Wave, Single-Phase AC Voltage Available in 0 to 150 or 0 to 300 Voltage Measurement Ranges Sensor Accuracy of < ±0.1% of Span with <240 msec Response Time 0 to 20 mA Output and Rated for Indoor Use Only Plastic Polycarbonate Housing with Standard 35mm DIN Rail Mounting Requires 4-20 mA Cable (#CABLE-4-20MA) NOTE: These Sensors Tie Directly into the Line And Should be Used Only By Qualified Personnel! Learn More	$139.00 Voltage Range
	CTV-E 0-600 Amp Split-Core AC Current Sensor Log AC Current in the 0 to 600 Amp Range 600 Volts AC Rating Constructed of Molded Plastic for Indoor Use Window Size: 2.92" x 2.46" Dimensions: 5.3" x 5.91" x 1.12" Learn More	$120.00
	Air Velocity and Temperature Remote Head Sensor Measures Air & Inert Gas Velocity and Ambient Temperature (3) Measurement Range Options: 0.15 to 1 m/s, 0.5 to 10 m/s and 1.0 to 20 m/s Output: 0 to 5 Volts DC Response Time: 400 ms Requires an Analog Input Option Learn More	$400.00 Measurement Range
	Onset HOBO AC-SENS-1 AC Power Adapter Provides DC Power to Sensor Input: 120 Volts AC, 60 Hz Output: 12 Volts DC @ 500 mA Expands the Range of 3rd Party Sensors Compatible with Onset HOBO U12, U30 and ZW Series Data Loggers Learn More	$29.00
	Onset 0 to 5 Volts DC External Input Cable External Input Cable to Measure DC Voltage Input Range: 0 to 5 Volts DC Cable: 13mm (0.5") Tinned Braided Wire Leads Cable Length: 1.9 Meters (6.3 feet) Indoor Use Only Learn More	$12.00
	Onset 0 to 10 Volts DC External Input Cable External Input Cable to Measure DC Voltage Input Range: 0 to 10 Volts DC Cable: 13mm (0.5") Tinned Braided Wire Leads Cable Length: 1.9 Meters (6.3 feet) Indoor Use Only Learn More	$12.00
	Onset 0 to 24 Volts DC External Input Cable External Input Cable to Measure DC Voltage Input Range: 0 to 24 Volts DC Cable: 13mm (0.5") Tinned Braided Wire Leads Cable Length: 1.9 Meters (6.3 feet) Indoor Use Only Learn More	$12.00
	Telaire 7001 Carbon Dioxide (CO2) Monitor Monitor Carbon Dioxide and Temperature Readings Provides a 0 to 4 Volt Output 0 to 10,000 ppm Carbon Dioxide Measurement on Display 0-4,000 ppm Carbon Dioxide Measurement Output Large LCD Display with Push Button Interface Learn More	$529.00 Purchase Options
	Telaire CO2 Monitor to Data Logger Cable Cable Connects Onset HOBO U12 Family Data Loggers to Telaire CO2 Monitor Learn More	$29.00
	Compressed Air FlowMeter Measures Flow by Maintaining 1 Probe Warmer than the Other Measurement Range of 31 to 350 SCFM w/ Extended Range up to 600 SCFM Fits 2" Steel Pipes Display Shows Flow Directly with No Setup or Adjustment Calculates the Mass Velocity from the Amount of Heat Required and the Flow on the Basis of Pipe Area Includes 110 Volt DC Power Adapter w/ 20 ft. Cable Learn More	$629.00
	Compressed Air Flow Meter Measures Flow by Maintaining 1 Probe Warmer than the Other Measurement Range of 1 to 80 SCFM Calculates the Mass Velocity from the Amount of Heat Required Calculates the Flow on the Basis of Pipe Area Fits 1" Steel Pipes Includes 110 Volt DC Power Adapter w/ 20 ft. Cable Learn More	$495.00
	Onset Split Core Bi-Directional Current Transducer Measures up to 200 Amps of DC Current in Both Flow Directions Status LED for Proper Installation Output: 4 to 20 mA (Bi-Polar) Response Time: 2 Seconds Learn More	$245.00
	Onset 0 to 2.5 Volts DC Voltage Input Cable - CABLE-2.5-STEREO Input Range: 0 to 2.5 Volts 13mm (0.5") Tinned Braided Wire Leads Cable Length: 1.8 Meters (6 Feet) Use Indoor and Outdoor Environments Learn More	$10.00
	Ashcroft Gauge Pressure Sensor Precision Pressure Measurements in Compressed Air Systems, Water or Oter Gases and Fluids Accuracy: ±1% to 1.5% FS Connection: 1/4" NPT 305 Stainless Steel Output Signal: 0 to Volts DC, 3 Wire Available in 100 PSIG, 200 PSIG and 500 PSIG Pressure Ranges Requires Analog Port Selection During U30 or RX3000 Series System Configuration and Use of a S-FS-CVIA when using the H22-001 Data Logger. When using a U12 or UX120 Series Data Loggers, this Sensor Requires a 0-5 VDC Analog Input Cable (CABLE-ADAP5) and External Power Provided by an AC Adapter (AC-SENS-1). Learn More	$199.00 Gauge Pressure Range
	Veris 480 V, 100 AMP Kilowatt Transducer Self-Contained 0 to 100 AMP Current Transducer for 1 or 3 Phase Power Monitoring Incorporates 3 Spit Core AC Current Sensors and 3 Voltage Leads Outputs a Signal Proportional to Killowatts of Power (Demand) Accepts an input Primary Voltage of 480 Volts AC rms Includes 3 100 AMP Split-Core CTs Learn More	$845.00
	Onset TMCx-HD Series Temperature Sensor -40°C to 50°C (-40°F to 122°F) Measurement Range in Water or Soil -40°C to 100°C (-40°F to 212°F) Measurement Range in Air 3 Minutes (Air) and 1 Minute (Water, Soil) Response Time Stainless Steel Sensor Tip Probe dimensions: 0.5 cm x 2.5 cm (0.20" x 1.0") Cable Available in 1 ft, 6 ft, 20 ft and 50 ft Lengths Learn More	$35.00 Cable Length
	Onset Stainless Steel Temperature Probe Measurement Range: -40°C to 100°C (-40°F to 212°F) in Air or Water 102 mm (47quot;) Food-Grade Stainless Steel Probe with Pointed Tip; 3 mm (0.12") Diameter Drift: < 0.1°C (0.2°F ) per year Response Time in Air: 3 Minutes Typical to 90% in Air Moving 1 m/sec (2.2 mph) Response Time in Stirred Water: 15 Seconds Typical Includes 1.8 Meter (6ft) Cable Learn More	$87.00
	Onset Air Temperature Sensor Fast Response Probe with Plated Copper Sensor Tip Suitable for Pipe Mounting Measurement Range: -40°C to 100°C Cable Length: 1.8 Meters (6 ft) Includes Tie Wraps, Screw and Thermal Grease Learn More	$39.00
	Volatile Organic Compound Sensor 0 to 10 ppm, 0 to 100 ppm and 0 to 1000 ppm Measurement Ranges ±2% Accuracy (0 to 100 ppm) and ±5% Accuracy (0 to 1000 ppm) 4-Digit LCD Display Shows Current VOC Readings with 4-20mA Output Signal < 5 Second Response Time to 90% IP65 (TVOC) and IP54 (Sensor) Ratings Rated Intrisically Safe for Use in Hazardous Indoor Environments Includes User Manual Learn More	$3,999.00

Customer Reviews

An Indispensible Tool For Troubleshooting Review by Arfur Smithers

Price
Quality
Value

Used this datalogger to track down an anomalous problem with flow computers and related field instrumentation and software, and it certainly provided some conclusive data. For the price, I can't think of anything which would have been more useful. Very easy to set up put into use. Almost self-explanatory. The software is quite useful and easy to understand.

The only caveat I would add is to make sure you have a MINI USB cable. It does not come with one. Nowadays it is very easy to find MICRO USB cables -- but MINI cables are becoming harder to find. Without that, you can't configure or use this device. Order one when you order this data logger. The price is negligible, compared to the time you will waste trying to track one down. Ideally, they would include one, but they don't. (Posted on 4/24/2016)

Write Your Own Review

You're reviewing: Onset HOBO UX120-006M 4-Channel Analog Data Logger

How do you rate this product? *

	1 star	2 stars	3 stars	4 stars	5 stars
Price
Quality
Value

*Nickname
*Summary of Your Review
*Review

Manuals and Resources

Software Downloads

Onset HOBOware Software for Windows

(Size: 171.2 MB)

Version 3.7.14

Onset HOBOware Software for Mac

(Size: 143.2 MB)

Version 3.7.13

User Manuals and Product Guides

Onset HOBOware User Manual

(Size: 6.2 MB)

Onset HOBOware Getting Started Guide

(Size: 316.8 KB)

Onset HOBO™ UX120-006M User Manual

(Size: 952.3 KB)

Product Videos

HOBOware/HOBOware Pro Software: Introduction

Onset HOBO™ UX120-006M: Introduction

Questions

Question: What is difference in features in Hoboware Free vs Hoboware Paid Software

Answer

Answer:
Very good question. Most customers get along fine with the free version of HOBOware. The pro version has some addition capabilities and is required on certain Onset products (not this one).

Here is a comparison between the two so you can review the differences - https://www.microdaq.com/hoboware-software-comparison

Question: Can the data logged info be recorded on a computer so there is no limitation (1.9M entries) We were hoping to use this to monitor power quality at a job site - would be plugged in for weeks

Answer

Answer:
The total number of readings this logger can record on its internal memory is 1.9 million readings.

This is the total number or data values for all four channels so if you were recording on all four channels you could record 475k readings per channel.

The data can be transferred to a computer after the recording is completed but you can't stream the data to have it record on the computer for infinite recording.

Question: Can the UX120-006M with 2.5 VDC Voltage input cables be used to sense and log contact closure.

Answer

Answer:
While the combination of this logger and the 0-2.5v input cable will allow you to record the presence of voltage this logger doesn't have a fast enough sample rate to capture events.

For a 4 channel event logger we would recommend the HOBO UX120-017M found here - https://www.microdaq.com/onset-hobo-ux120-pulse-event-runtime-data-logger.php

View all related questions.

Onset HOBO UX120-006M 4-Channel Analog Data Logger

Part Number: UX120-006M

Onset HOBO® UX120-006M 4-Channel Analog Data Logger Specifications

You may also be interested in the following product(s)

Customer Reviews

Write Your Own Review

You're reviewing: Onset HOBO UX120-006M 4-Channel Analog Data Logger

How do you rate this product? *

Manuals and Resources

Questions

Leave a Reply

Leave a Reply

Leave a Reply

Ask Your Question

Contact Us

Need Help

Company Resources

video title