HOBO 4-Channel Pulse, Event, State and Run-Time Data Logger

HOBO Power and Energy Meter

• Measures AC Current, AC Voltage, Amp Hour, Amps, Kilowatt Hours, Kilowatts, Power Factor, Volt-Amp Reactive, Volt-Amp Reactive Hour, Volt-Amps, Volts, Reactive Power, Watt Hours and Watts
• Measurement Range of 90 to 600 Volts AC with Wye and Delta Configurations
• ±0.5% Accuracy (ANSI 12.20, IEC 62053-22 Class 0.5S)
• Meets all Requirements for CE, UL, California CSI Solar and ANSI C 12.20 Directives
• LCD Backlit Display with LED Lights for Active Contact Status and Readings
• Compatible with Current Transformers (CTs) with Range of 5 to 32,000 Amps and 333 mV Output

Includes (4) Mounting Screws, (2) Magnets, Hook & Loop Tape and (4) Terminal Blocks

Onset HOBO Wiring Kit for Power and Energy Meter

• Connects Logger to Power Meter and Electrical Panel
• For Use in Indoor Environments

Compatible with the Onset Power and Energy Meter

Single Phase Fuse Kit

• Single Phase Fuse Kit
• Single Ue Fuse Pack, 1/2Amp, 600 Vols AC, Slow-Blow

Compatible with the Onset HOBO E50B2 Power and Energy Meter

Mini Split Core Current Transformers

• Split-Core Design for Fast, Easy Installation
• Internal Precision Burden Resistor
• Output: 0.333 Volts AC at Rated Current
• 8 ft Twisted Pair, 22 AWG Leads
• Operates from 50 Hz to 400 Hz

Available in 5, 10, 20, 50 and 75 Rated Amps

Accu-CT Revenue Grade Split Core Current Transformer

• Easy to Open and Install with One Hand while Wearing Safety Gloves
• 333 mVolt AC Output at Rated Full Scale Current with No Shorting Blocks Required
• Low Phase Angle Error of ±0.50° from 1% to 120% of Rated Current
• ±0.75% from 1% to 120% of Rated Primary Current Accuracy
• 2.38" (W) x 2.40" (H) x 0.90" (T) with a 0.75" Window Opening
• 8 ft Conductor (White and Black), Twisted with 8 ft (2.4 Meters) Lead Length

Available in 5, 20, 50, 100, 200 and 250 Rated Amps

WattNode 277/480 VAC Delta kWh Transducer

• True RMS AC Watt-Hour Transducer with Pulse Output Proportional to kWh Consumed
• Solid State Relay Closure
• Line to Neutral: 277 Volts AC
• Line to Line: 480 Volts AC
• Phases: 3
• Wires: 3

WattNode 208/240 VAC Wye kWh Transducer

• True RMS AC Watt-Hour Transducer with Pulse Output Proportional to kWh Consumed
• Solid State Relay Closure
• Line to Neutral: 120 Volts AC
• Line to Line: 208 to 240 Volts AC
• Phases: 3
• Wires: 4

WattNode 208/240 VAC Delta kWh Transducer

• True RMS AC Watt-Hour Transducer with Pulse Output Proportional to kWh Consumed
• Solid State Relay Closure
• Line to Neutral: 120 Volts AC
• Line to Line: 208 to 240 Volts AC
• Phases: 3
• Wires: 3

CSV-A8 AC Current Sensor with Switch

• Split-Core AC Current Sensor with Adjustable Threshold Switch Output to Monitor When Equipment Turns On and Off
• 0.50 to 175 Amp Adjustable Current Threshold
• Relay Output for Equipment Monitoring
• Built-in On/Off Status Lights
• UL Listed

Compatible with Onset HOBO UX90-001, UX90-004 and UX120-017 Data Loggers

Veris Kilowatt Hour Transducer 3-Phase, 800 Amp

• Self-Contained 0 to 800 AMP Current Transducer for 3-Phase AC Loads
• 3 Split Core AC Current Sensors and 3 Voltage Leads
• Outputs a Signal Proportional to Killowatts of Power (Demand)
• Accepts Input Primary Coltage of 208 to 480 Volts AC rms

Requires Pulse Input Adapter (#S-UCC-M001 or #S-UCC-M006)

Veris Kilowatt Hour Transducer 1-Phase, 330 Amp

• Self-Contained 0 to 200 AMP Current Transducer for Single-Phase Power Monitoring
• 1 Split Core AC Current Sensor and 2 Voltage Leads
• Outputs a Signal Proportional to Killowatts of Power (Consumption)
• Accepts Input Primary Coltage of 208 to 480 Volts AC rms

Requires Pulse Input Adapter (#S-UCC-M001 or #S-UCC-M006)

Contact Closure Pulse Input Adapter

• Log and Records the Number of Contact Closures per Interval
• Plug-in Modular Connector
• 3.6 Volt Maximum Input
• Weatherproof PVC Housing
• Compatible with Onset HOBO U30 Data Loggers, HOBO Micro Station and HOBO Energy Logger

Includes (2) Wire Nuts and User Manual

Electronic Switch Pulse Input Adapter

• Log and Records the Number of Switch closures per Interval
• Plug-in Modular Connector
• 3.6 Volt Maximum Input
• Weatherproof PVC Housing
• Compatible with Onset HOBO U30 Data Loggers, HOBO Micro Station and HOBO Energy Logger

Includes (2) Wire Nuts and User Manual

HOBO Water Flow Sensor with Reed Switch

• Measure Cold and Hot Water Flow Rates: 0.25 to 22.0 gpm
• Compatible with 3/4" Pipes and 1/2" and 1.0" with Step Downs and Step Ups (Sold Separately)
• Operating Range: 4.4"C to 82.2"C (40"F to 180"F)
• Dry Contact Reed Switch with 100mA Max Contact Rating
• 8 Digit Odometer, Meter Register May be Turned 360° for Easier Readings
• Lead Free Brass Meets the 2014 "Reduction of Lead in Drinking Water" Act Requirements

Onset U-Shuttle Data Transporter

• Pocket-Sized Shuttle for Readout and Relaunch HOBO Data Loggers
• Syncs Data Logger Clocks and Relaunch
• View Readings on LCD Display
• Direct USB Connection to PC Computer
• Requires HOBOWare PRO Software

Onset HOBO Spare Terminal Blocks

• Spare Terminal Blocks

Compatible with Onset UX120 Pulse Data Logger