MicroDAQ.com
Toll Free: 1-877-275-9606
(603) 746-5524
$5.99 Flat Fee Economy Shipping on Most Items Shipped in the Continental USA

You have no items in your shopping cart.

Subtotal: $0.00

Onset HOBO ZW-008 Wireless Data Node for Analog and Pulse Inputs



HOBO Wireless Analog and Pulse Input Data Node

Onset Data Node with 2 Analog Inputs (0 to 10 Volts DC Output) and 2 Pulse Inputs

Part Number: ZW-008

Be the first to ask a question about this product

Be the first to review this product


  • Measures, Records and Wirelessly Transmits 2 Analog Signals (0 to 10 Volts DC or 4-20 mA Output) and 2 Pulse Signals

  • Onboard Buffer Stores up to 3,000 Measurements if Wireless Communications are Interrupted To Prevent Data Loss

  • Up to 100 Meter Transmission Range Between Data Nodes and Wireless Receiver

  • AC Powered with 1 Year Battery Backup

  • Includes AC Power Adapter, AAA Batteries, Mounting Bracket and Accessory Kit


Requires Wireless Data Receiver (ZW-RCVR)

Special order - please allow 3-5 business days for this item to ship.

$241.00

Onset HOBO® ZW-008 Analog Input and Pulse Input Data Node Specifications

Data Channels (2) Analog Input Channel
(2) Pulse Input Channel
Pulse Channel Maximum Input Frequency: 120 Hz (120 Pulses per Second)
Input Type: Electronic Sold State Switch Closure or CMOS-level Digital Output (FET, opto-FET or Open Collector)
Minimum Pulse Width: 1 ms
Input/Output Impedance: 100 KΩ
Maximum Input Voltage: 2.8 Volts
Bits per Sample: 16
Sampling Rate 1 Minute to 18 Hours (User-Specified)
Transmission Rate 2 Minutes or Greater
Data Storage Capacity 3,000 Measurements Stored in Buffer Until Wireless Communications Available
Power Options AC Power Adapter (AC-ZW-1) with Battery Backup
Battery (3) Alkaline AAA Batteries (Included)
Battery Life 1 Year @ 15 Minute Sampling Rate, 60 Minute Transmit Interval
Note: If Designated as a Router, Battery Life is 24 Hours
Measurement Range Analog: 0 to 2.5 Volts DC (CABLE-2.5-STEREO); 0 to 5 Volts DC (CABLE-ADAP5), 0 to 10 Volts (CABLE-ADAP10), 4-20mA (CABLE-4-20mA)
Pulse: 0 to 65,535 Pulses Per Logging Interval (CABLE-2.5-STEREO)
Accuracy Analog: ±1.544 mV plus 2% (Typical)
Resolution Analog: 0.6 mV
Response Time Dependent on External Sensor
Operating Range Battery Powered: -20°C to 50°C (-4°F to 122°F) @ 5 to 95% RH
AC Powered: -20°C to 70°C (-4°F to 158°F) @ 5 to 95% RH
Time Accuracy ±1 Minute Per Month @ 25°C (77°F)
OS Compatibility Windows: Windows 10, 8, 7, Vista and XP (32-Bit and 64-Bit)
Mac: OS X 10.6.x, 10.7.x and 10.8.x
Wireless Range: 100 Meters (300 ft) Line of Sight
Radio Power: 1.6mW (2 dBm)
Standard: IEEE 802.15.4
Frequency: 2.4 GHz
Note: Distance of Transmission will Vary Greatly and Depends Upon Obstructions and Interference
Case Material ABS
Weight 138 g (4.87 oz) with Batteries
Dimensions 9.65cm x 10.8cm x 2.8cm (3.8" x 4.25" x 1.1")

You may also be interested in the following product(s)

Onset HOBO 4-20 mA Input Cable - CABLE-4-20MA

Onset HOBO 4-20 mA Input Cable - CABLE-4-20MA

  • Cable for Connecting Sensor with 4-20mA Output to HOBO U12, UX120 or ZW Series External-Channel Data Logger
  • Length: 18.5"
  • Use in Outdoor and Indoor Environments
Learn More
$25.00
CTV-A 0-20 Amp split-core AC Current Sensor

CTV-A 0-20 Amp split-core AC Current Sensor

  • Log AC Current in the 0 to 20 Amp Range
  • 600 Volts AC Rating
  • Constructed of Molded Plastic for Indoor Use
  • Window Size: 1.10" x 0.90"
  • Dimensions: 2.9" x 2.58" x 1.04"
Learn More
$95.00
CTV-B 0-50 Amp split-core AC Current Sensor

CTV-B 0-50 Amp split-core AC Current Sensor

  • Log AC Current in the 0 to 50 Amp Range
  • 600 Volts AC Rating
  • Constructed of Molded Plastic for Indoor Use
  • Window Size: 1.10" x 0.90"
  • Dimensions: 2.9" x 2.58" x 1.04"
Learn More
$95.00
CTV-C 0-100 Amp Split-Core AC Current Sensor

CTV-C 0-100 Amp Split-Core AC Current Sensor

  • Log AC Current in the 0 to 100 Amp Range
  • 600 Volts AC Rating
  • Constructed of Molded Plastic for Indoor Use
  • Window Size: 1.10" x 0.90"
  • Dimensions: 2.9" x 2.58" x 1.04"
Learn More
$95.00
CTV-D 0-200 Amp Split-Core AC Current Sensor

CTV-D 0-200 Amp Split-Core AC Current Sensor

  • Log AC Current in the 0 to 200 Amp Range
  • 600 Volts AC Rating
  • Constructed of Molded Plastic for Indoor Use
  • Window Size: 1.54" x 1.26"
  • Dimensions: 3.92" x 4.72" x 1.14"
Learn More
$120.00
CTV-E 0-600 Amp Split-Core AC Current Sensor

CTV-E 0-600 Amp Split-Core AC Current Sensor

  • Log AC Current in the 0 to 600 Amp Range
  • 600 Volts AC Rating
  • Constructed of Molded Plastic for Indoor Use
  • Window Size: 2.92" x 2.46"
  • Dimensions: 5.3" x 5.91" x 1.12"
Learn More
$120.00
ConLab AC Voltage Transmitter Sensors

ConLab AC Voltage Transmitter Sensors

  • Self-Powered Transformer for Monitoring Sine Wave, Single-Phase AC Voltage
  • Available in 0 to 150 or 0 to 300 Voltage Measurement Ranges
  • Sensor Accuracy of < ±0.1% of Span with <240 msec Response Time
  • 0 to 20 mA Output and Rated for Indoor Use Only
  • Plastic Polycarbonate Housing with Standard 35mm DIN Rail Mounting

Requires 4-20 mA Cable (#CABLE-4-20MA)

NOTE: These Sensors Tie Directly into the Line And Should be Used Only By Qualified Personnel!

Learn More
$139.00
Voltage Range

Air Velocity and Temperature Remote Head Sensor

Air Velocity and Temperature Remote Head Sensor

  • Measures Air & Inert Gas Velocity and Ambient Temperature
  • (3) Measurement Range Options: 0.15 to 1 m/s, 0.5 to 10 m/s and 1.0 to 20 m/s
  • Output: 0 to 5 Volts DC
  • Response Time: 400 ms
  • Requires an Analog Input Option
Learn More
$400.00
Measurement Range

HOBO Power and Energy Meter

HOBO Power and Energy Meter

  • Measures AC Current, AC Voltage, Amp Hour, Amps, Kilowatt Hours, Kilowatts, Power Factor, Volt-Amp Reactive, Volt-Amp Reactive Hour, Volt-Amps, Volts, Reactive Power, Watt Hours and Watts
  • Measurement Range of 90 to 600 Volts AC with Wye and Delta Configurations
  • ±0.5% Accuracy (ANSI 12.20, IEC 62053-22 Class 0.5S)
  • Meets all Requirements for CE, UL, California CSI Solar and ANSI C 12.20 Directives
  • LCD Backlit Display with LED Lights for Active Contact Status and Readings
  • Compatible with Current Transformers (CTs) with Range of 5 to 32,000 Amps and 333 mV Output

Includes (4) Mounting Screws, (2) Magnets, Hook & Loop Tape and (4) Terminal Blocks

Learn More
$625.00
Telaire 7001 Carbon Dioxide (CO2) Monitor

Telaire 7001 Carbon Dioxide (CO2) Monitor

  • Monitor Carbon Dioxide and Temperature Readings
  • Provides a 0 to 4 Volt Output
  • 0 to 10,000 ppm Carbon Dioxide Measurement on Display
  • 0-4,000 ppm Carbon Dioxide Measurement Output
  • Large LCD Display with Push Button Interface
Learn More
$529.00
Purchase Options

Compressed Air FlowMeter

Compressed Air FlowMeter

  • Measures Flow by Maintaining 1 Probe Warmer than the Other
  • Measurement Range of 31 to 350 SCFM w/ Extended Range up to 600 SCFM
  • Fits 2" Steel Pipes
  • Display Shows Flow Directly with No Setup or Adjustment
  • Calculates the Mass Velocity from the Amount of Heat Required and the Flow on the Basis of Pipe Area

Includes 110 Volt DC Power Adapter w/ 20 ft. Cable

Learn More
$629.00
Compressed Air Flow Meter

Compressed Air Flow Meter

  • Measures Flow by Maintaining 1 Probe Warmer than the Other
  • Measurement Range of 1 to 80 SCFM
  • Calculates the Mass Velocity from the Amount of Heat Required
  • Calculates the Flow on the Basis of Pipe Area
  • Fits 1" Steel Pipes

Includes 110 Volt DC Power Adapter w/ 20 ft. Cable

Learn More
$495.00
Onset Split Core Bi-Directional Current Transducer

Onset Split Core Bi-Directional Current Transducer

  • Measures up to 200 Amps of DC Current in Both Flow Directions
  • Status LED for Proper Installation
  • Output: 4 to 20 mA (Bi-Polar)
  • Response Time: 2 Seconds
Learn More
$245.00
Onset 0 to 2.5 Volts DC Voltage Input Cable - CABLE-2.5-STEREO

Onset 0 to 2.5 Volts DC Voltage Input Cable - CABLE-2.5-STEREO

  • Input Range: 0 to 2.5 Volts
  • 13mm (0.5") Tinned Braided Wire Leads
  • Cable Length: 1.8 Meters (6 Feet)
  • Use Indoor and Outdoor Environments
Learn More
$10.00
Onset 0 to 5 Volts DC External Input Cable

Onset 0 to 5 Volts DC External Input Cable

  • External Input Cable to Measure DC Voltage
  • Input Range: 0 to 5 Volts DC
  • Cable: 13mm (0.5") Tinned Braided Wire Leads
  • Cable Length: 1.9 Meters (6.3 feet)
  • Indoor Use Only
Learn More
$12.00
Onset 0 to 10 Volts DC External Input Cable

Onset 0 to 10 Volts DC External Input Cable

  • External Input Cable to Measure DC Voltage
  • Input Range: 0 to 10 Volts DC
  • Cable: 13mm (0.5") Tinned Braided Wire Leads
  • Cable Length: 1.9 Meters (6.3 feet)
  • Indoor Use Only
Learn More
$12.00
Ashcroft Gauge Pressure Sensor

Ashcroft Gauge Pressure Sensor

  • Precision Pressure Measurements in Compressed Air Systems, Water or Oter Gases and Fluids
  • Accuracy: ±1% to 1.5% FS
  • Connection: 1/4" NPT 305 Stainless Steel
  • Output Signal: 0 to Volts DC, 3 Wire
  • Available in 100 PSIG, 200 PSIG and 500 PSIG Pressure Ranges

Requires Analog Port Selection During U30 or RX3000 Series System Configuration and Use of a S-FS-CVIA when using the H22-001 Data Logger. When using a U12 or UX120 Series Data Loggers, this Sensor Requires a 0-5 VDC Analog Input Cable (CABLE-ADAP5) and External Power Provided by an AC Adapter (AC-SENS-1).

Learn More
$199.00
Gauge Pressure Range

Veris Kilowatt Hour Transducer 3-Phase, 800 Amp

Veris Kilowatt Hour Transducer 3-Phase, 800 Amp

  • Self-Contained 0 to 800 AMP Current Transducer for 3-Phase AC Loads
  • 3 Split Core AC Current Sensors and 3 Voltage Leads
  • Outputs a Signal Proportional to Killowatts of Power (Demand)
  • Accepts Input Primary Coltage of 208 to 480 Volts AC rms

Requires Pulse Input Adapter (#S-UCC-M001 or #S-UCC-M006)

Learn More
$875.00
Veris Kilowatt Hour Transducer 1-Phase, 330 Amp

Veris Kilowatt Hour Transducer 1-Phase, 330 Amp

  • Self-Contained 0 to 200 AMP Current Transducer for Single-Phase Power Monitoring
  • 1 Split Core AC Current Sensor and 2 Voltage Leads
  • Outputs a Signal Proportional to Killowatts of Power (Consumption)
  • Accepts Input Primary Coltage of 208 to 480 Volts AC rms

Requires Pulse Input Adapter (#S-UCC-M001 or #S-UCC-M006)

Learn More
$660.00
Veris 480 V, 100 AMP Kilowatt Transducer

Veris 480 V, 100 AMP Kilowatt Transducer

  • Self-Contained 0 to 100 AMP Current Transducer for 1 or 3 Phase Power Monitoring
  • Incorporates 3 Spit Core AC Current Sensors and 3 Voltage Leads
  • Outputs a Signal Proportional to Killowatts of Power (Demand)
  • Accepts an input Primary Voltage of 480 Volts AC rms

Includes 3 100 AMP Split-Core CTs

Learn More
$845.00
WattNode 347/600 VAC Wye kWh Transducer

WattNode 347/600 VAC Wye kWh Transducer

  • True RMS AC Watt-Hour Transducer with Pulse Output Proportional to kWh Consumed
  • Solid State Relay Closure
  • Line to Neutral: 347 Volts AC
  • Line to Line: 600 Volts AC
  • Phases: 3
  • Wires: 4
Learn More
$259.00
WattNode 277/480 VAC Wye kWh Transducer

WattNode 277/480 VAC Wye kWh Transducer

  • True RMS AC Watt-Hour Transducer with Pulse Output Proportional to kWh Consumed
  • Solid State Relay Closure
  • Line to Neutral: 277 Volts AC
  • Line to Line: 480 Volts AC
  • Phases: 3
  • Wires: 4
Learn More
$249.00
WattNode 277/480 VAC Delta kWh Transducer

WattNode 277/480 VAC Delta kWh Transducer

  • True RMS AC Watt-Hour Transducer with Pulse Output Proportional to kWh Consumed
  • Solid State Relay Closure
  • Line to Neutral: 277 Volts AC
  • Line to Line: 480 Volts AC
  • Phases: 3
  • Wires: 3
Learn More
$259.00
WattNode 230/400 VAC Wye kWh Transducer

WattNode 230/400 VAC Wye kWh Transducer

  • True RMS AC Watt-Hour Transducer with Pulse Output Proportional to kWh Consumed
  • Solid State Relay Closure
  • Line to Neutral: 230 Volts AC
  • Line to Line: 400 Volts AC
  • Phases: 3
  • Wires: 4
Learn More
$249.00
WattNode 230/400 VAC Delta kWh Transducer

WattNode 230/400 VAC Delta kWh Transducer

  • True RMS AC Watt-Hour Transducer with Pulse Output Proportional to kWh Consumed
  • Solid State Relay Closure
  • Line to Neutral: 120 Volts AC
  • Line to Line: 400 Volts AC
  • Phases: 3
  • Wires: 4
Learn More
$259.00
WattNode 208/240 VAC Wye kWh Transducer

WattNode 208/240 VAC Wye kWh Transducer

  • True RMS AC Watt-Hour Transducer with Pulse Output Proportional to kWh Consumed
  • Solid State Relay Closure
  • Line to Neutral: 120 Volts AC
  • Line to Line: 208 to 240 Volts AC
  • Phases: 3
  • Wires: 4
Learn More
$219.00
WattNode 208/240 VAC Delta kWh Transducer

WattNode 208/240 VAC Delta kWh Transducer

  • True RMS AC Watt-Hour Transducer with Pulse Output Proportional to kWh Consumed
  • Solid State Relay Closure
  • Line to Neutral: 120 Volts AC
  • Line to Line: 208 to 240 Volts AC
  • Phases: 3
  • Wires: 3
Learn More
$249.00
Onset TMCx-HD Series Temperature Sensor

Onset TMCx-HD Series Temperature Sensor

  • -40°C to 50°C (-40°F to 122°F) Measurement Range in Water or Soil
  • -40°C to 100°C (-40°F to 212°F) Measurement Range in Air
  • 3 Minutes (Air) and 1 Minute (Water, Soil) Response Time
  • Stainless Steel Sensor Tip
  • Probe dimensions: 0.5 cm x 2.5 cm (0.20" x 1.0")

Cable Available in 1 ft, 6 ft, 20 ft and 50 ft Lengths

Learn More
$35.00
Cable Length

Onset Stainless Steel Temperature Probe

Onset Stainless Steel Temperature Probe

  • Measurement Range: -40°C to 100°C (-40°F to 212°F) in Air or Water
  • 102 mm (47quot;) Food-Grade Stainless Steel Probe with Pointed Tip; 3 mm (0.12") Diameter
  • Drift: < 0.1°C (0.2°F ) per year
  • Response Time in Air: 3 Minutes Typical to 90% in Air Moving 1 m/sec (2.2 mph)
  • Response Time in Stirred Water: 15 Seconds Typical

Includes 1.8 Meter (6ft) Cable

Learn More
$87.00
Onset Air Temperature Sensor

Onset Air Temperature Sensor

  • Fast Response Probe with Plated Copper Sensor Tip
  • Suitable for Pipe Mounting
  • Measurement Range: -40°C to 100°C
  • Cable Length: 1.8 Meters (6 ft)

Includes Tie Wraps, Screw and Thermal Grease

Learn More
$39.00
Volatile Organic Compound Sensor

Volatile Organic Compound Sensor

  • 0 to 10 ppm, 0 to 100 ppm and 0 to 1000 ppm Measurement Ranges
  • ±2% Accuracy (0 to 100 ppm) and ±5% Accuracy (0 to 1000 ppm)
  • 4-Digit LCD Display Shows Current VOC Readings with 4-20mA Output Signal
  • < 5 Second Response Time to 90%
  • IP65 (TVOC) and IP54 (Sensor) Ratings
  • Rated Intrisically Safe for Use in Hazardous Indoor Environments

Includes User Manual

Learn More
$3,999.00
HOBO Water Flow Sensor with Reed Switch

HOBO Water Flow Sensor with Reed Switch

  • Measure Cold and Hot Water Flow Rates: 0.25 to 22.0 gpm
  • Compatible with 3/4" Pipes and 1/2" and 1.0" with Step Downs and Step Ups (Sold Separately)
  • Operating Range: 4.4"C to 82.2"C (40"F to 180"F)
  • Dry Contact Reed Switch with 100mA Max Contact Rating
  • 8 Digit Odometer, Meter Register May be Turned 360° for Easier Readings
  • Lead Free Brass Meets the 2014 "Reduction of Lead in Drinking Water" Act Requirements
Learn More
$219.00
Onset HOBO AC-SENS-1 AC Power Adapter

Onset HOBO AC-SENS-1 AC Power Adapter

  • Provides DC Power to Sensor
  • Input: 120 Volts AC, 60 Hz
  • Output: 12 Volts DC @ 500 mA
  • Expands the Range of 3rd Party Sensors

Compatible with Onset HOBO U12, U30 and ZW Series Data Loggers

Learn More
$29.00
Pelican Protective Carry Case

Pelican Protective Carry Case

  • Durable Airline-Legal Carry-On for Data Logging Equipment
  • Strong Polyurethane Wheels with Stainless Steel Bearings
  • Open Cell Core with Solid Wall Design
  • Stainless Steel Hardware and Padlock Protectors
  • Pick N Pluck™ with Convoluted Lid Foam
Learn More
$229.00
Mounting Bracket for ZW Series Wireless Nodes

Mounting Bracket for ZW Series Wireless Nodes

  • Mounting Accessory for ZW Wireless Nodes
  • Allows Orientation of ZW Node to Desired Position for Better Communications

Includes Mounting Bracket and Screws

Learn More
$22.00

Customer Reviews

Write Your Own Review

You're reviewing: HOBO Wireless Analog and Pulse Input Data Node

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
Price
Quality
Value

There are no product questions yet.

Ask Your Question

  • Reload captcha

* Required Fields