VersaLog Bridge and Strain Gauge Data Logger

SKU
VERSALOG-BR
$578.00
  • 2.5 Volts DC Excitation Voltage with ±8mV Input Range
  • 20 milliseconds to 12 hour Sampling Interval
  • Fast Sampling Mode, Alarm and Excitation Output
  • 10 Year Battery Life (1 Minute Sampling Rate)
  • Stores up to 2 Million Recorded Readings onto Non-Volatile Memory
  • Excitation Control Output for Powering Connected Devices
Requires SiteView Software for Setup, Configuration and Report Analysis
Special order - please allow 5-7 business days for this item to ship

Versalog VERSALOG-BR Bridge and Strain Gauge Data Logger Specifications

Bridge Excitation Voltage Output: 2.5 Volts DC (10mA Max Load Current)
Accuracy: ±0.2% pulse
Input Range: ±8mV
ADC Converter: 16-Bits
Alarms Channel Alarms: (2) Editable Alarm Thresholds per Channel; Can be Configured as Alarm Outputs
Alarm Outputs: Alarm On (Switch On) and Alarm Off (Switch Off)
Alarm-On Delays: Programmable 0 to 10 Minutes Delay with 1 Minute Increments
Alarm Indicator: On-Board LED Lights in Red when in Alarm Condition
Logging Mode Stop Recording or FIFO when Memory is Full
Start Mode Programmable Instant, Start Delay or Push-Button Activation
Data Storage Capacity 2 Million Readings
Sampling Rate 20 milliSeconds to 12 Hours (User Selectable))
Clock Accuracy ±1 Minute per Month
Enclosure Constructed of Aluminum
LED Indicator Normal Sampling: Green When Sampling
Alarm: Red When Sampling
Low Battery: Amber When Sampling
Excitation Control A2/EXT terminal strip can be Configured as Excitation Control Output for Powering Connected Devices
Warm-Up Delay Interval Settings: 10 to 240 seconds with 10-second Increments
Power Source Built-in 3.6 Volt Lithium Battery
Battery Life 10 Years Based on 1 Minute Sampling Interval
Communications USB, AUX (RJ11) for Direct TTL Level Communications
Baud Rate: 2,400 to 115,200 (Auto-Detect)
Software Compatibility Windows 11, 10 and 7
Operating Environment Temperature: -40°C to 70°C (-40°F to 158°F)
Humidity: 0 to 95% RH Non-Condensing
Approvals CE, FCC
Weight 200 grams (7.05 oz.)
Dimensions 3.46" x 2.53" x 0.95" (88mm x 64.2mm x 24mm)
Customer Questions
How many inputs does this device have?
Technically speaking this logger is considered to be a single channel however it does have multiple inputs to allow it to be connected/configured for a quarter bridge, half bridge, or full bridge circuit.  Here is a link to the manual which should...
how many channels?
This is a single channel device.
Please, mind that only logged in users can submit questions
Copyright © 2024 MicroDAQ, LLC. All Rights Reserved.