VersaLog 8 Channel Voltage Data Logger

Accsense Voltage Data Recorder Accepts Input Signals from Sensors, Transducers and Transmitters
SKU
VERSALOG-DCV-2
$618.00
  • 7 Input Channels for Voltage and 1 Internal Temperature Channel
  • 20 milliseconds to 12 hour Sampling Interval
  • -5 Volts DC to 20 Volts DC Measurement Range
  • 10 Year Battery Life (1 Minute Sampling Rate)
  • Stores up to 2 Million Recorded Readings onto Non-Volatile Memory
  • Excitation Control Output for Powering Connected Devices
Requires SiteView Software for Setup, Configuration and Report Analysis
Special order - please allow 5-7 business days for this item to ship

8 Channel Voltage Data Logger Specifications

Voltage Connection Type: Pluggable Terminal Block with 16-Bit AD Converter
Number of Inputs: 7
Range: 0 to 20 Volts DC, -5 Volts DC to 5 Volts DC
Accuracy: ±005% FSR @ 25°C
Resolution: 0.001%
Load Resistor: > 1 MOhms
Over-Current Protection: ±40 Volts DC
Temperature Sensor Type: Thermistor
Number of Channels: 1 (Internal)
Range: -40°C to 70°C (-40°F to 158°F)
Accuracy: ±0.2°C @ 0°C to 70°C
Data Storage Capacity 2 Million Recorded Readings 
Sampling Rate 20 milliseconds to 12 Hours (User Selectable)
Logging Mode Stop Recording or FIFO When Memory is Full
Start Modes Immediate Start, Delayed Start, Push Button Start
Alarms 2 Configurable Alarms per Channel
Output Max Power: 200mA @ 24 Volts DC
Alarm-On Delay: Programmable 0 to 10 Minutes Delay with 1 Minute Increments
Alarm Indicator: On-Board LED (Red) When Alarm Conditions Met
NOTE: Alarm Status Can Be Reported to Host PC via USB, Modem or Ethernet Device Server with Siteview Software
Time Accuracy ±1 Minute per Month
Operating Environment Temperature: -40°C to 70°C (-40°F to 158°F)
Humidity: 0% to 95% RH, non-condensing
LED Indicators Green: Recording Normally
Red: Alarm Threshold When Met
Amber: Low Battery Indication
Power Source 3.6 Volt Lithium Battery
Standards Compliance CE, FCC
Excitation Control A2/EXT Terminal Strip Can be Configured as Excitation Control Output for Powering Connected Devices
Battery Life 10 Years @ 1 Minute Sampling Rate
Note: Dependant Upon Environment, Sampling Rate and Battery Type
Communications USB or AUX (RJ11) for Direct TTL Level Communications
Ethernet for Remote Access with DirectServer Kit (Sold Separately)
Baud Rate 2400 to 115200 bps Autodetect on USB and AUX Ports
OS Compatibility Windows 8, 7, Vista and XP SP2+)
Housing Aluminum Enclosure
Customer Questions
Hello Will it work with foil 120 ohm strain gages?
While it might work the resolution probably won't be tight enough for you to get any useful data from it. For strain gauges we would recommend the Versalog BR logger as it is designed for that application. https://www.microdaq.com/versalog-bridge-strain...
Is the software compatible with Windows 10?
Yes, it will work with Windows10
Please, mind that only logged in users can submit questions
Copyright © 2024 MicroDAQ, LLC. All Rights Reserved.