SL261 AC/DC Current Probe
AEMC Elongated Probe Measures up to 100 Amps
SKU
1201.51
$469.30
- Low AC and DC Measurements w/ Hall Effect Sensor Technology
- Unique Design for Probing in Crowded Wiring in Industrial and Automotive Environments
- Handles Contain Electronics and Batteries
- AC + DC Output Signals Proportional to the Total Current
- Low Phase Shift
Compatible with Digital Multi Meters, Voltmeters and Other Voltage Measuring Instruments with BNC Connector
Special order - typical lead time is 2-4 weeks, however there may be shipping delays beyond our control
Overview of the AEMC SL261 Long Nose Current Probe
The SL261 is an AC/DC long nose current probe designed for measuring low currents. The probe features 10mAdc sensitivity and has a measurement range of 100 mA to 100A AC/DC. The unique long nose design aids in connecting in areas of limited space or crowed wires. The probe features an insulated BNC output cable and it can accurately measure AC or DC waveforms. The device has proportional mV output for direct readings on oscilloscopes.
AEMC 1201.51, SL261 AC/DC Current Probe Specifications
| Nominal Range | 10 Amp & 100 Amp |
| Measurement Range | 100 mA to 100 Amp |
| Transformation Ratio | Voltage Output |
| Output Signal | 10 Amp: 100 mV/A 100 Amp: 10 mV/A |
| Accuracy (100 mV/A Range) | 50mA to 10A: 3% of Reading ±50mA 500mA to 40A: ±4% of Reading ±50mA 40A to 100A: ±15% max @ 100A |
| Phase Shift (10 mV/A Range) | DC: to 65Hz 1.5° |
| Overload | Red LED Indicates Input Greater than the Selected Range |
| Frequency Range | DC to 100kHz (-3dB with Current Derating) |
| Load Impedance | > 1MΩ/100pF |
| Working/Common Mode Voltage | 600 Vrms |
| Battery | 9 Volt (Included) |
| Output Termination | 6.5ft Coaxial Cable |
| Operating Range | Temperature: 32°F to 122°F (0°C to 50°C) |
| Storage Range | Temperature: -22°F to 176°F (-30°C to 80°C) |
| Conductor Size | 0.46" (11.8mm) Maximum |
| Polycarbonate Material | Handle: Lexan® 920A, UL94 V2 |
| Double Insulation | Yes |
| Standards Compliance | CE, UL (USA and Canada), EN 61010-2-32 |
| Dimensions | 23.1cm x 3.6cm x 6.7cm (9.09" x 1.42" x 2.64") |
| Weight | 11.6 oz (330 grams) w/ Battery |
Customer Questions
Related Products
