SR704 AC Current Probe
AEMC Probe w/ Large Jaw Opening Accomodates up to (2) 500MCM Conductors
SKU
2116.30
$337.25
- Measurement Range of 1mA to 1200AAC
- Transformation, Low Phase Shift and Broad Frequency Response
- High Quality Magnetic Cores and Uniform Windings Provide Sensitivity for Low and 1200AAC Measurements
- Provides Current Outputs in mA/A for DMMs, Data Loggers and Power Meters with Current Ranges
Provides Current Outputs in mA/A for DMMs, Data Loggers and Power Meters with Current Ranges
Special order - typical lead time is 2-4 weeks, however there may be shipping delays beyond our control
Overview of the AEMC SR704 AC Current Probe
The SR704 is a general-purpose AC current probe with a measurement range of 1mA to 1200A AC. It’s an ideal choice for use with DMMs, data loggers, or other instruments that have a current input. The probe has a 1000:1 ratio and output of 1mA per amp measured in the jaw. The SR704 has an integrated 5’ lead which is terminated by shrouded banana plugs. The rounded jaw design of this probe makes it perfect for any application where high accuracy, low phase shift, and wide frequency response is required.
AEMC 2116.30 SR704 AC Current Probe Specifications
Nominal Range | 1000A |
Measurement Range | 1mA to 1200A |
Transformation Ratio | 1000: 1 |
Output Signal | 1mAAC/AAC: 1AAC @ 1000A |
Accuracy (1000A Range) |
1mA to 100mA: ≤3% of Reading ± 5 µV 0.1 to 1A: ≤2% of Reading ± 3 µV 1 to 10A: <1% of Reading ± 0.2mV 10 to 100A: ≤0.5% of Reading 100 to 1200A: ≤0.3% of Reading |
Phase Shift (1000A Range) |
1-10A: ≤2° 10-100A: ≤1° 100-1200A: ≤0.7° |
Overload | 1200A for 40 Min On, 20 Min OFF |
Frequency Range | 30Hz to 5kHz; Current Derating Above 1kHz Using the Formula: 1000A x 1/F (in kHz) |
Load Impedance | 5Ω Max |
Working/Common Mode Voltage | 600Vrms Cat. III |
Output Termination | 5 ft. Lead |
Operating Range | Temperature: -14°F to 122°F (-10°C to 50°C) Humidity: 0 to 85% RH @ 35°C |
Storage Range | Temperature: -4°F to 158°F (-20°C to 70°C) |
Jaw Opening | 2.25" (57mm) Max |
Conductor Size | 2.05" (52mm) Max |
Bus Bar Size | (1) 1.95" x 0.19" (50mm x 5mm) - Max |
Polycarbonate Material | Handles: Polycarbonate + ABS, Gray UL94 VO Jaws: Polycarbonate, Red, UL94 VO |
Double Insulation | Yes |
Standards Compliance | CE, UL (USA and Canada), EN 61010-2-032 |
Dimensions | 11.1cm x 21.6cm x 4.5cm (4.37" x 8.50" x 1.77") |
Weight | 1.21 lbs (550 grams) |
Customer Questions