SR752 AC Current Probe
AEMC Probe w/ Large Jaw Opening Accomodates up to (2) 500MCM Conductors
SKU
2116.32
$341.05
- Measurement Range of 100mA to 1200AAC
- Transformation, Low Phase Shift and Broad Frequency Response
- High Quality Magnetic Cores and Uniform Windings Provide Sensitivity for Low and 1200AAC Measurements
- Provides Accurate Voltage of 1mV/A, Enables Instruments without Current Ranges to Measure Currents Through an AC voltage Range
Provides Current Outputs in mA/A for DMMs, Data Loggers and Power Meters with Current Ranges
Special order - typical lead time is 2-4 weeks, however there may be shipping delays beyond our control
Overview of the AEMC SR752 Current Probe
The SR752 is a general-purpose AC current probe with a measurement range of 100mA to 1200A AC. The SR752 has excellent linearity and low phase shift, plus a broad frequency response, ensure accurate measurements of current for power and power quality instruments. The SR752 is an excellent choice for use with DMMs, recorders, data loggers, oscilloscopes, power meters, and harmonics meters.
AEMC 2116.32 SR752 AC Current Probe Specifications
Nominal Range | 1000A |
Measurement Range | 100mA to 1200A |
Transformation Ratio | Voltage Output |
Output Signal | 1mAAC/AAC: 1AAC @ 1000A |
Accuracy (1000A Range) |
0.1A to 1A: ≤2% of Reading ± 3 µV 1A to 10A: ≤1% of Reading 10A to 100A: <0.5% of Reading 100A to 1200A: ≤0.3% of Reading |
Phase Shift (1000A Range) |
1-10A: ≤2° 10-100A: ≤1° 100-1200A: ≤0.7° |
Overload | 1200A for 40 Min On, 20 Min OFF |
Frequency Range | 30Hz to 5kHz; Current Derating Above 1kHz Using the Formula: 1000A x 1/F (in kHz) |
Load Impedance | 100KΩ Min |
Working/Common Mode Voltage | 600Vrms Cat. III |
Output Termination | 5 ft. Lead |
Operating Range | Temperature: -14°F to 122°F (-10°C to 50°C) Humidity: 0 to 85% RH @ 35°C |
Storage Range | Temperature: -4°F to 158°F (-20°C to 70°C) |
Jaw Opening | 2.25" (57mm) Max |
Conductor Size | 2.05" (52mm) Max |
Bus Bar Size | (1) 1.95" x 0.19" (50mm x 5mm) - Max |
Polycarbonate Material | Handles: Polycarbonate + ABS, Gray UL94 VO Jaws: Polycarbonate, Red, UL94 VO |
Double Insulation | Yes |
Standards Compliance | CE, UL (USA and Canada), EN 61010-2-032 |
Dimensions | 11.1cm x 21.6cm x 4.5cm (4.37" x 8.50" x 1.77") |
Weight | 1.21 lbs (550 grams) |
Customer Questions