LogTag UTRED-16F Temperature Data Recorder w/ PDF Reports

SKU
UTRED-16F
In Stock
$55.00
  • -40°C to 99°C Temperature Measurement Range with ±0.5°C Accuracy
  • Stores up to 16,129 Recorded Readings onto Internal Memory for Download to PC
  • LCD Display Shows Current Recorded Temperature, Logging and Battery Status
  • 2 Year Typical Battery Life
  • Direct USB Connection to PC Computer; Docking Station Not Required
  • Can Generate a Fully Detailed PDF Report without Special Hardware
  • NOTE: Not Designed for VFC Vaccine Monitoring

Requires LogTag ST100 External Sensor Probe. Software Available as a Free Download.

Requires LogTag Analyzer Software (Version 3.0.5+) for Configuration and Adobe Reader for Downloading (Both Available as Free Downloads)
Requires External Probe from the Optional Accessories Tab!

Overview of the LogTag UTRED-16F Temperature Data Recorder

The LogTag UTRED-16F is a temperature data logger that utilizes external temperature probes (sold separately), an easy-to-read display, and a long-lasting integrated USB plug. The display shows recording status, current temperature, alarm status of up to six user-configurable alarms, and the duration of any temperature excursions. Configuring the logger is done using the free to download, easy to use, LogTag Analyzer software. Once data is recorded the logger will automatically generate a PDF report without the need of software or accessories. Detailed data can also be viewed using the software. The logger comes with a fixed battery (non-replaceable) that has a typical life of up to two years.

This logger is also available as a kit for monitoring the transport of vaccines. The kit includes the logger, probe, glycol buffer bottle, calibration, and accessories - VAC-UTRED-16F-KIT

Software Downloads
exe
(Size: 81.5 MB)
Version 3.2.5 - Compatible with All LogTag Data Recorders

Logtag UTRED-16F PDF Temperature Data Logger with External Probe Specifications

Temperature Measurement Range: -40°C to 85°C
Accuracy @ ±0.5°C: -20°C to +40°C
Accuracy @ ±0.8°C: -40°C to -20°C and 40°C to 70°C
Accuracy @ ±1.2°C: 70°C to 99°C
Resolution: 0.1°C (0.1°F)
Data Storage Capacity 16,129 Readings
Sampling Frequency 30 Seconds to 18 Hours
Start Modes Push Button Start, Specific Date and Time or Delay up to 72 Hours
Recording Indicator "REC" Symbol on LCD
Download Time Typically with full memory (16,129 Readings) in less than 30 seconds from time of insertion to availability of PDF Report
Standards Compliance IP61 (When Vertically Mounted or Hung with USB Dust-Cap in Place)
Power Source CR2450 Lithium Battery - Non-Replaceable
Battery Life 2 Years Dependent on Sampling Rate, Number of Downloads (2 Year Shelf Life before Use)
Real Time Clock Rated Accuracy ±25ppm @ 25°C (Equivalent to 2.5 Seconds/Day)
Rated Temperature Coefficient is -0.034 ±0.006ppm/°C (Typically +/- 0.00294 Seconds/Day°C)
Connection Interface USB 2.0, A Type Plug
Software PDF Reader or LogTag Analyzer 3.1.9 or Higher
Software Compatibility Windows 11, 10 and 7 (64-Bit and 32-Bit)
PDF Report 1 Page Report with Trip and Alarm Summary. Multi-Page Report with List of Readings, including date and time
Case Material Polycarbonate
Weight 39g
Dimensions 93mm x 54.5mm x 8.6mm (3.66" x 2.14" x 0.33") including protective USB cap
Customer Questions
Does the sensor probe has to be immersed in glycol or just at ambient temperatures
This device requires an external probe which must be purchased separately.  If you are using it to monitor vaccines we would recommend purchasing it as a vaccine monitoring kit which can be found here - ...
Please, mind that only logged in users can submit questions
Copyright © 2024 MicroDAQ, LLC. All Rights Reserved.