Wireless Input Modules

• Sensors: Accepts Pt100, Pt1000 3-Wire and 4-Wire Sensor Probes
• Measurement Range: -199C to 600C
• Accuracy (10°C to 40°C): ±(0.3°C + 0.3% of Reading)
• Accuracy (-40°C to 10°C): ±(0.5°C + 0.3% of Reading)
• Accuracy (40°C to 80°C): ±(0.5°C + 0.3% of Reading)
• Measurement Resolution: 0.1°C
• Compatible with the RTR-505B Input Module Data Logger

Requires Pt100 or Pt1000 Sensor Probe

• Measurement Range: 0 to 22 Volts
• Accuracy (10°C to 40°C): ±(0.5 mV + 0.3% of Reading)
• Accuracy (-40°C to 10°C): ±(1.0 mV + 0.5% of Reading)
• Accuracy (40°C to 80°C): ±(1.0 mV + 0.5% of Reading)
• Measurement Resolution (Up to 400 mV): 0.1 mV
• Measurement Resolution (Up to 800 mV): 0.2 mV
• Measurement Resolution (Up to 999 mV): 0.4 mV
• Measurement Resolution (Up to 3.2 V): 1 mV
• Measurement Resolution (Up to 6.5 V): 2 mV
• Measurement Resolution (Up to 9.999 V): 4 mV
• Measurement Resolution (Up to 22 V): 10 mV
• Compatible with the RTR-505B Input Module Data Logger

• Measurement Range: 0 to 20 mA (Operational up to 40mA)
• Accuracy (10°C to 40°C): ±(0.05 mA + 0.3% of Reading)
• Accuracy (-40°C to 10°C): ±(0.1 mA + 0.3% of Reading)
• Accuracy (40°C to 80°C): ±(0.1 mA + 0.3% of Reading)
• Measurement Resolution: 0.01 mA
• Compatible with the RTR-505B Input Module Data Logger

Requires Analog Sensor

• Input Signal: Non-Voltage Contact Input
• Voltage Input: 0 to 27 Volts
• Detection Voltage (Low): 0.5 Volts or Less
• Detection Voltage (High): 2.5 Volts or More
• Input Impedance: Approximately 100 kΩ Pull Up
• Chattering Filter (ON): 15 Hz or Less
• Chattering Filter (OFF): 3.5 kHz or Less
• Maximum Count: 61,439/Recording Interval
• Compatible with the RTR-505B Input Module Data Logger

• Sensors: Accepts Type K, J, T and S Thermocouple Sensor Probes
• Measurement Range (Type K): -199C to 1370C
• Measurement Range (Type J): -199C to 1200C
• Measurement Range (Type T): -199C to 400C
• Measurement Range (Type S): -50C to 1760C
• Accuracy (Type K): ±(0.3°C + 0.3% of Reading)
• Accuracy (Type J): ±(0.3°C + 0.3% of Reading)
• Accuracy (Type T): ±(0.3°C + 0.3% of Reading)
• Accuracy (Type S): ±(1.0°C + 0.3% of Reading)
• Cold Junction Compensation (10°C to 40°C):±0.3°C
• Cold Junction Compensation (-40°C to 10°C):±0.5°C
• Cold Junction Compensation (40°C to 80°C):±0.5°C
• Measurement Resolution (Type K): 0.1°C
• Measurement Resolution (Type J): 0.1°C
• Measurement Resolution (Type T): 0.1°C
• Measurement Resolution (Type S): 0.2°C
• Compatible with the RTR-505B Input Module Data Logger

Requires Type K, J, T or S Thermocouple Probe