Toll Free: 1-877-275-9606
(603) 746-5524
$5.99 Flat Fee Economy Shipping on Most Items Shipped in the Continental USA

You have no items in your shopping cart.

Subtotal: $0.00

TandD RTR-500mA Current Input Data Logger

RTR-505 Current Input Data Logger

TandD Wireless Data Logger Measuring Current with Input Module

Part Number: RTR-505MA

Be the first to ask a question about this product

Be the first to review this product

  • Measure and Record Current Using Input Module and External Sensor

  • Stores up to 16,000 Data Samples Between Wireless Transmissions to Base Collector or Repeater

  • IP64 Rating for Dust-Tight and Splashed Water Protection

  • 150 Meters Line of Sight Transmission Range Between Devices (Logger to Base Unit or Repeaters)

  • Automatic Transmission of Data (Current or Logged) at Set Interval to Base Unit or Repeater

  • Compatible with the Free TandD WebStorage Cloud Service for Viewing your Recorded Readings Anywhere, Anytime

Includes Logger, mA Input Module, 1/2 AA Lithium Battery, Strap and User Manual

A Complete System Requires a Base Collector (RTR-500DC, RTR-500GSM, RTR-500NW or RTR-500AW) and a RTR-500 Series Wireless Data Logger

Wireless Notice and Disclaimer
The use of Radio Frequency products is tightly regulated by local laws. Wireless products sold by MicroDAQ.com Ltd. are approved for use in the U.S. and Canada, but may not be in other countries. It is the sole responsibility of our customers to insure that the local use of wireless products purchased on this site is in full compliance with all local laws and regulations. MicroDAQ.com Ltd., and the manufacturers it represents will not accept any responsibility for the use of unapproved wireless product in other countries.

Special order - please allow 2-4 weeks for this item to ship.

  • Buy 10 for $208.05 each and save 5%

TandD RTR-505MA Wireless Current Input Data Logger Specifications

Measurement 4-20 mA (Current)
Current Input Range: 0 to 20 mA (Operational up to 40 mA)
Resolution: 0.01 mA
Accuracy: ±0.05 mA + 0.3% or Reading (10°C to 40°C)
Input Resistance 100Ω ±0.3Ω
Sensor Connection Cable Insertion Connection: Plus (+) 2 Parallel Terminals, Minus (-) 2 Parallel Terminals: Total 4 Terminals
Compatible Wires Single Wire: 0.32mm to 0.65mm (28 AWG to 22 AWG)
Twisted Wire: 0.32mm (22 AWG); 0.12mm or More in Diameter
Strip Length: 9mm to 10mm
Operating Environment Temperature: -40°C to 80°C
Humidity: 90%RH or Less (No Condensation)
Materials Vinyl Coated Electrical Wire with Black Polyamide Connector
Cable Length 0.095 Meters
Data Storage Capacity 16,000 Samples
Sampling Interval 1,2,5,10,15,20,30 Seconds / 1,2,5,10,15,20,30,60 minutes
(Total of 15 Choices)
Recording Mode Endless: Overwrite Oldest Data when Capacity is Full
One-time: Stop Recording when Capacity is Full
LCD Display Items Current Readings / Recording Settings / Battery Life Warning / Over Measurement Range Warning / Amount of Recorded Data
Power 1/2 AA Lithium Battery (#HP-B)
AC Adaptor (Sold Separately Part #RTR-500A1)
Large Capacity Battery Type Requires Kit #RTR-500B1
Battery Life RTR-505MA: Approx. 10 Months
RTR-505MA-L: 4 Years
(Battery life depends on measurement environment, recording interval and battery performance)
Communication Types Wireless or Optical
Wireless Method: FCC Part 15 Section 247 / IC RSS-210
Frequency: 902 to 928 MHz
Transmission: 150 Meters (500 ft) Line of Sight
Software Compatibility Windows 10, 7 (32/64bit); Vista (32bit); XP-SP2+ (32bit)
Communication Time Wireless: About 2 Minutes (1 Unit with Full Capacity)
Optical: About 160 Seconds (1 Unit with Full Capacity)
Standards Compliance IP64 Splash Proof, Rated for Use in Daily Life
Weight RTR-505MA: 55 g (Includes Lithium Battery w/o Input Module)
RTR-505MA-L: 109 grams (Large Capacity Battery Pack Included)
Dimension RTR-505MA: 62mm x 47mm x 19mm
RTR-505MA-L: 62mm x 47mm x 46.5mm
Antenna Length: 24mm
(Excluding Protrusions)

You may also be interested in the following product(s)

Large Capacity Battery Pack (w/o Battery)

Large Capacity Battery Pack (w/o Battery)

  • Extends Battery Compartment on RTR-500 Data Loggers
  • Increases Logger Battery Life to about 4 Years
  • Splash Proof

Note this Kit Does Not Include the C Size Lithium Battery (Part# BAT-C-LITH) must be Purchased Seperately.

Learn More
Wall Mount for RTR-500L Series Data Loggers

Wall Mount for RTR-500L Series Data Loggers

  • Large Battery Pack Wall Mount
  • Dimension: 66.6mm x 70mm x 51.7mm
  • Screw Holes: (2) - 4.2mm
  • Includes (2) Lock Screws and (1) Double-Sided Adhesive Tape
  • NOTE: Cracks May Develop If Exposed to Strong Impact at temperature of -30C or Less
Learn More

Customer Reviews

Write Your Own Review

You're reviewing: RTR-505 Current Input Data Logger

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars

There are no product questions yet.

Ask Your Question

* Required Fields