RX3000 Remote Monitoring System and Data Logger

HOBOware Pro Software and USB Cable Kit

• Advanced Software for Management of Onset Data Loggers
• Supports Data Shuttle, Data Assistants and Plug-ins
• Additional Time-Saving Tools for Fast Setup and Data Readout
• Advanced Plotting Tools for More Precise Data Analysis
• Compatible with Windows and Mac Operating Systems

Kit Includes HOBOware Pro Software and Standard Type A to Mini B USB Cable (#CABLE-USBMB-HS)

Compare HOBOware (Free Download) to HOBOware Pro Software

Ultrasonic Wind Speed and Direction Smart Sensor

• Ultrasonic Wind Speed and Direction Smart Sensor Has No Moving Parts
• Measurement Range of 0 to 92 mph (Wind Speed) and 0 to 359° (Wind Direction)
• Plug-in Modular Connector for Easy Installation
• Powered by a Built-in Solar Panel
• Compatible with Onset RX3000, U30, H21-USB and H22-001

Accu-CT Revenue Grade Split Core Current Transformer

• Easy to Open and Install with One Hand while Wearing Safety Gloves
• 333 mVolt AC Output at Rated Full Scale Current with No Shorting Blocks Required
• Low Phase Angle Error of ±0.50° from 1% to 120% of Rated Current
• ±0.75% from 1% to 120% of Rated Primary Current Accuracy
• 2.38" (W) x 2.40" (H) x 0.90" (T) with a 0.75" Window Opening
• 8 ft Conductor (White and Black), Twisted with 8 ft (2.4 Meters) Lead Length

Available in 5, 20, 50, 100, 200 and 250 Rated Amps

Mini Split Core Current Transformers

• Split-Core Design for Fast, Easy Installation
• Internal Precision Burden Resistor
• Output: 0.333 Volts AC at Rated Current
• 8 ft Twisted Pair, 22 AWG Leads
• Operates from 50 Hz to 400 Hz

Available in 5, 10, 20, 50 and 75 Rated Amps

AC Voltage Potential Transformer

• Accurate Measurement of Sinusoidal and Non-Sinusoidal Waveforms
• Accuracy: ±1% (10% to 130% of Rated Voltage)
• Output Signal: 0.333 Volts at Rated Input Voltage

Available in 0 to 150 Volts, 0 to 300 Volts and 0 to 600 Volt Ranges

Onset 1-Piece Air Velocity Sensor

• Measures Air & Inert Gas Velocity Using a 1-Piece Sensor
• 0.15 to 5 m/s and 0.15 to 10 m/s Measurement Range Options
• Current Draw (12 Volt Excitation): 70 mA
• Output: 0 to 4 Volts DC
• Response Time: 1.5 seconds

Onset 2-Piece Air Velocity Sensor

• Measures Air & Inert Gas Velocity Using a 2-Piece Sensor
• 0.15 to 5 m/s and 0.15 to 10 m/s Measurement Range Options
• Current Draw (12 Volt Excitation): 70 mA
• Output: 0 to 4 Volts DC
• Response Time: 1.5 seconds

HOBO Power and Energy Meter

• Measures AC Current, AC Voltage, Amp Hour, Amps, Kilowatt Hours, Kilowatts, Power Factor, Volt-Amp Reactive, Volt-Amp Reactive Hour, Volt-Amps, Volts, Reactive Power, Watt Hours and Watts
• Measurement Range of 90 to 600 Volts AC with Wye and Delta Configurations
• ±0.5% Accuracy (ANSI 12.20, IEC 62053-22 Class 0.5S)
• Meets all Requirements for CE, UL, California CSI Solar and ANSI C 12.20 Directives
• LCD Backlit Display with LED Lights for Active Contact Status and Readings
• Compatible with Current Transformers (CTs) with Range of 5 to 32,000 Amps and 333 mV Output

Includes (4) Mounting Screws, (2) Magnets, Hook & Loop Tape and (4) Terminal Blocks

Onset Barometric Pressure Sensor

• Automatic Communication of Configuration Information to Data Logger without Setup
• 12-Bit Resolution with Rugged, Outdoor Rated Weatherproof Housing
• 660 to 1070 mbar Measurement Range with ±3.0 mbar Accuracy
• 1.0 mbar Drift per Year
• 50 cm Cable Length

Includes (2) Cable Ties and (2) #8 Self Tapping Screws

Telaire 7001 Carbon Dioxide (CO2) Monitor

• Monitor Carbon Dioxide and Temperature Readings
• Provides a 0 to 4 Volt Output
• 0 to 10,000 ppm Carbon Dioxide Measurement on Display
• 0-4,000 ppm Carbon Dioxide Measurement Output
• Large LCD Display with Push Button Interface

Compressed Air Flow Meter

• Measures Flow by Maintaining 1 Probe Warmer than the Other
• Measurement Range of 1 to 80 SCFM
• Calculates the Mass Velocity from the Amount of Heat Required
• Calculates the Flow on the Basis of Pipe Area
• Fits 1" Steel Pipes

Includes 110 Volt DC Power Adapter w/ 20 ft. Cable

Compressed Air FlowMeter

• Measures Flow by Maintaining 1 Probe Warmer than the Other
• Measurement Range of 31 to 350 SCFM w/ Extended Range up to 600 SCFM
• Fits 2" Steel Pipes
• Display Shows Flow Directly with No Setup or Adjustment
• Calculates the Mass Velocity from the Amount of Heat Required and the Flow on the Basis of Pipe Area

Includes 110 Volt DC Power Adapter w/ 20 ft. Cable

Onset Split Core Bi-Directional Current Transducer

• Measures up to 200 Amps of DC Current in Both Flow Directions
• Status LED for Proper Installation
• Output: 4 to 20 mA (Bi-Polar)
• Response Time: 2 Seconds

Ashcroft Gauge Pressure Sensor

• Precision Pressure Measurements in Compressed Air Systems, Water or Oter Gases and Fluids
• Accuracy: ±1% to 1.5% FS
• Connection: 1/4" NPT 305 Stainless Steel
• Output Signal: 0 to Volts DC, 3 Wire
• Available in 100 PSIG, 200 PSIG and 500 PSIG Pressure Ranges

Requires Analog Port Selection During U30 or RX3000 Series System Configuration and Use of a S-FS-CVIA when using the H22-001 Data Logger. When using a U12 or UX120 Series Data Loggers, this Sensor Requires a 0-5 VDC Analog Input Cable (CABLE-ADAP5) and External Power Provided by an AC Adapter (AC-SENS-1).

Veris Kilowatt Hour Transducer 1-Phase, 330 Amp

• Self-Contained 0 to 200 AMP Current Transducer for Single-Phase Power Monitoring
• 1 Split Core AC Current Sensor and 2 Voltage Leads
• Outputs a Signal Proportional to Killowatts of Power (Consumption)
• Accepts Input Primary Coltage of 208 to 480 Volts AC rms

Requires Pulse Input Adapter (#S-UCC-M001 or #S-UCC-M006)

Veris Kilowatt Hour Transducer 3-Phase, 800 Amp

• Self-Contained 0 to 800 AMP Current Transducer for 3-Phase AC Loads
• 3 Split Core AC Current Sensors and 3 Voltage Leads
• Outputs a Signal Proportional to Killowatts of Power (Demand)
• Accepts Input Primary Coltage of 208 to 480 Volts AC rms

Requires Pulse Input Adapter (#S-UCC-M001 or #S-UCC-M006)

WattNode 208/240 VAC Wye kWh Transducer

• True RMS AC Watt-Hour Transducer with Pulse Output Proportional to kWh Consumed
• Solid State Relay Closure
• Line to Neutral: 120 Volts AC
• Line to Line: 208 to 240 Volts AC
• Phases: 3
• Wires: 4

WattNode 277/480 VAC Delta kWh Transducer

• True RMS AC Watt-Hour Transducer with Pulse Output Proportional to kWh Consumed
• Solid State Relay Closure
• Line to Neutral: 277 Volts AC
• Line to Line: 480 Volts AC
• Phases: 3
• Wires: 3

Veris 480 V, 100 AMP Kilowatt Transducer

• Self-Contained 0 to 100 AMP Current Transducer for 1 or 3 Phase Power Monitoring
• Incorporates 3 Spit Core AC Current Sensors and 3 Voltage Leads
• Outputs a Signal Proportional to Killowatts of Power (Demand)
• Accepts an input Primary Voltage of 480 Volts AC rms

Includes 3 100 AMP Split-Core CTs

Onset Leaf Wetness Smart Sensor

• Uses a Capacitive Grid (Less Sensitive to Surface Residues) to Measure Leaf Wetness
• 0 (Dry) to 100% (Wet) Measurement Range with ±5% Repeatability
• Less Than ±5% per Year Stability
• Plug-in Modular Connector for Easy Connection to Onset Micro Station or U30 Remote Systems
• 3 Meter Cable Length and 20cm Mounting Bracket

Includes Mounting Bracket, 3 Meter Cable, U-Bolts and Tie Wraps

Onset PAR Photosynthetic Light Sensor

• Measures the Light Range that Effects Photosynthesis (PAR - Photosynthetically Active Radiation)
• 400 nm to 700 nm Frequency Measurement Range with ±5 umol.m2/sec or ±5%
• -40°C to 75°C Operating Temperature Range
• Constructed of Anodized Aluminum Housing with Acrylic Diffuser and O-Ring Seal

Includes 3 Meter Cable Length

Electronic Switch Pulse Input Adapter

• Log and Records the Number of Switch closures per Interval
• Plug-in Modular Connector
• 3.6 Volt Maximum Input
• Weatherproof PVC Housing
• Compatible with Onset HOBO U30 Data Loggers, HOBO Micro Station and HOBO Energy Logger

Includes (2) Wire Nuts and User Manual

Onset Solar Radiation Sensor

• Measure Solar Radiation Light Levels Using Silicon Pyranometer
• 0 to 1280 W/m2 Measurement Range over a Spectral Range of 300 to 1100 nm
• Records the Average Light Intensity over the Pre-Determined User-Set Logging Interval
• -40°C to 75°C Operating Temperature Range
• Housing Constructed of Anodized Aluminum and Acrylic Diffuser and O-Ring Seal

Rain Gauge Smart Sensor (0.01")

• New! AeroCone® Design for Better Measurement Accuracy in High-Wind Conditions
• Cost Effective way of Measuring Rainfall on HOBO Weather Stations
• Measurement Range of 0 to 10.2cm (0 to 4in.) per Hour
• Plug-in Modular Connector for Easy Installation
• Data Stored in Sensor & Automatically Communicates to Attached Data Logger (Sold Separately)
• Compatible with Onset RX3000, U30, H21-002 and H22-001

Contact Closure Pulse Input Adapter

• Log and Records the Number of Contact Closures per Interval
• Plug-in Modular Connector
• 3.6 Volt Maximum Input
• Weatherproof PVC Housing
• Compatible with Onset HOBO U30 Data Loggers, HOBO Micro Station and HOBO Energy Logger

Includes (2) Wire Nuts and User Manual

Rain Gauge Smart Sensor (0.2mm)

• New! AeroCone® Design for Better Measurement Accuracy in High-Wind Conditions
• Cost Effective way of Measuring Rainfall on HOBO Weather Stations
• Measurement Range of 0 to 10.2cm (0 to 4in.) per Hour
• Plug-in Modular Connector for Easy Installation
• Data Stored in Sensor & Automatically Communicates to Attached Data Logger (Sold Separately)
• Compatible with Onset RX3000, U30, H21-USB and H22-001

Onset Rain Gauge Sensor

• Measures Rainfall up to 5.0" (12.7 cm) per Hour and Accuracy of 1.0%
• Tipping Bucket Mechanism is Mounted on a Stainless Steel Shaft with Brass Bearings
• Constructed of Aluminum Housing and Collector
• Available in English or Metric Versions
• Includes 2 Meter Cable and Brackets for Post or Tripod Mount

Onset HOBO Temperature RH Smart Sensor

• 12-Bit 2 Channel Sensor for Humidity and Temperature Measurements
• Automatically Communicates Configuration Data to the Attached Data Logger (Sold Separately)
• -40°C to 75°C at 0 to 100% RH Measurement Range
• ±0.2°C (Temperature) and ±2.5% (RH) Accuracy
• Weatherproof Environmental Rating

Available in 2 Meter and 8 Meter Cable Lengths

Onset Soil Moisture Sensor with 5 cm Probe

• Measures Soil Water Content from 0 to 0.450 m3/m3 (0 to 45%)
• Integrates with the ECH2) Sensor and a 12-Bit A/D
• 4% Accuracy in Typical Soil Conditions and 2% in Soil-Specific Calibration
• 5 cm Probe Length and 5 Meter Cable Length

Onset Soil Moisture Smart Sensor

• Measures a 1-liter Volume of Soil for More Accurate Picture of Average Soil Moisture
• Sensor Uses a High Frequency Circuit for Accuracy Even in High Salinity and Sandy Soils
• ±3% Accuracy in Most Soil Conditions and ±2% with Soil Specific Calibration
• 0 to 0.570 m3/m3 (Volumetric Water Content) Measurement Range

Compatible with Onset HOBO Micro Weather Station and U30 Remote Monitoring Systems

Onset HOBO Temperature Sensor

• -40°C to 100°C (-40°F to 212°F) Measurement Range
• ±0.2°C Accuracy
• Automatically Communicates Configuration Data to the Attached Logger (Sold Separately)
• Stainless Steel Sensor Tip

Available in 2 Meter, 6 Meter or 17 Meter Lengths

Volatile Organic Compound Sensor

• 0 to 10 ppm, 0 to 100 ppm and 0 to 1000 ppm Measurement Ranges
• ±2% Accuracy (0 to 100 ppm) and ±5% Accuracy (0 to 1000 ppm)
• 4-Digit LCD Display Shows Current VOC Readings with 4-20mA Output Signal
• < 5 Second Response Time to 90%
• IP65 (TVOC) and IP54 (Sensor) Ratings
• Rated Intrisically Safe for Use in Hazardous Indoor Environments

Includes User Manual

HOBO Water Flow Sensor with Reed Switch

• Measure Cold and Hot Water Flow Rates: 0.25 to 22.0 gpm
• Compatible with 3/4" Pipes and 1/2" and 1.0" with Step Downs and Step Ups (Sold Separately)
• Operating Range: 4.4"C to 82.2"C (40"F to 180"F)
• Dry Contact Reed Switch with 100mA Max Contact Rating
• 8 Digit Odometer, Meter Register May be Turned 360° for Easier Readings
• Lead Free Brass Meets the 2014 "Reduction of Lead in Drinking Water" Act Requirements

Onset Wind Direction Sensor

• Research Grade Plug-and-Play Wind Direction Sensor
• 0 to 355 Degree (5 Degree Dead Band) Measurement Range
• Average Wind Wind Direction in Sampling Interval
• Injected Molded Housing & Vane with Static Dissipating Base
• Long Sensor Life withStainless Steel Ball Bearings and Static Dissipating Housing

An Full Cross Arm (#M-CAA) or Half Cross Arm #(M-CAB) is Required for Mounting

HOBO Wind Speed Smart Sensor

• Uses 3-Cup Anemometer
• Plug-In Modular Connection
• Measurement Range: 0 to 76 m/s (0 to 170 mph)
• Accuracy: ±1.1 m/s (2.4 mph) or 4% of Reading Whichever is Greater
• Cable Length: 3 Meters

Wind Speed and Direction Smart Sensor

• Cost Effective way of Measuring Wind Speed and Direction on HOBO Weather Stations
• Measurement Range of 0 to 170 mph (Wind Speed) and 0 to 355° (Wind Direction)
• Plug-in Modular Connector for Easy Installation
• Data Stored in Sensor & Automatically Communicates to Attached Data Logger (Sold Separately)
• Compatible with Onset RX3000, U30, H21-002 and H22-001

Wind Speed and Direction Smart Sensor Set

• 2 Sensor Set Measuring Wind Speed and Wind Direction
• Measurement Range of 0 to 100 mph (Wind Speed) and 0 to 355%deg; (Wind Direction)
• Calculates Average Wind Speed, Highest 3-Second Wind Gust and Average Wind Direction
• Data Stored in Sensor & Automatically Communicates to Attached Data Logger (Sold Separately)
• Compatible with Indoor and Outdoor Environments with its Weatherproof Rating

Requires an Onset HOBO Full Cross Arm (Part #M-CAA) to Support Both Wind Sensors

Onset Adapter for RM Young Wind Monitor AQ Sensor

• Connects RM Young Wind Monitors AQ Sensor to Onset Line of Weather and Remote Monitoring Systems
• Wind Speed Range: 0 to 50 m/s (0 to 112 mph)
• Wind Direction Range: 0 to 355 degrees
• Wind Speed Resolution: 0.20 m/s (0.46 mph)
• Wind Direction Resolution: 1.4 degrees
• Cable Length: 3 Meters (9.8 ft)

Compatible with the RM Young Wind Monitor - AQ Sensor (#05305)

Onset Adapter for RM Young Wind and Alpine Monitor

• Connects RM Young Wind and Alpine Wind Monitors to Onset Line of Weather and Remote Monitoring Systems
• Wind Speed Range: '0 to 52 m/s (0 to 116 mph)
• Wind Direction Range: 0 to 355 degrees
• Wind Speed Resolution: 0.20 m/s (0.46 mph)
• Wind Direction Resolution: 1.4 degrees
• Cable Length: 3 Meters (9.8 ft)

Compatible with RM Young Wind Monitor (#05103) and Alpine Monitor (#05103-45)

Onset Adapter for RM Young Marine Wind Monitor

• Connects RM Young Wind and Alpine Wind Monitors to Onset Line of Weather and Remote Monitoring Systems
• Wind Speed Range: 0 to 52 m/s (0 to 116 mph)
• Wind Direction Range: 0 to 355 degrees
• Wind Speed Resolution: 0.20 m/s (0.46 mph)
• Wind Direction Resolution: 1.4 degrees
• Cable Length: 3 Meters (9.8 ft)

Compatible with RM Young Marine Wind Monitor (#05106)

Onset 1 to 2 Sensor Communication Adapter with 5in Extension Cable

• Consumer-Grade UL-Listed Plastic 2 to 1 6-pin Adapter and 5" Extension Cable

Onset 1 to 6 Adapter for Smart Sensors

• Connect up to 6 Smart Sensors in a Water-Resistant Enclosure to 1 Sensor Extension

Onset Cable Caddy

• Convenient Place to Organize and Mount Excess Sensor Cable
• Extends Sensor Cable Life by Securing Extra Cable
• Provides Convenient Location to Mount Barometric Pressure Sensor
• Dimensions: 15 cm x 10 cm x 9 cm (6" x 4" x 3.5")
• Weight: 0.3 kg (11 oz)

Includes U-Bolt and (4) Cable Ties

Pelican Protective Carry Case

• Durable Airline-Legal Carry-On for Data Logging Equipment
• Strong Polyurethane Wheels with Stainless Steel Bearings
• Open Cell Core with Solid Wall Design
• Stainless Steel Hardware and Padlock Protectors
• Pick N Pluck™ with Convoluted Lid Foam

Onset Weatherproof Protective Housing for Smart Sensor Extensions

• Protects the Connection Between the Onset Smart Sensor and Sensor Extensions
• Withstands Short-Term Underwater Submersions
• Housing Constructed of Molded PVC
• Dimensions: 16.5cm x 3.17cm (6.5" x 1.25")
• Includes Housing, Rubber Stoppers and Grip-It Lubricant

Compatible with Sensor Extension Cable (#S-EXT-M002, #S-EXT-M005, #S-EXT-M010 and S-EXT-M025)

Onset HOBO Smart Sensor Extension Cable

• Male to Male Extension Cable
• Available in 2 Meter, 5 Meter, 10 Meter and 25 Meter Lengths

Includes Female to Female Adapter

Onset HOBO AC-SENS-1 AC Power Adapter

• Provides DC Power to Sensor
• Input: 120 Volts AC, 60 Hz
• Output: 12 Volts DC @ 500 mA
• Expands the Range of 3rd Party Sensors

Compatible with Onset HOBO U12, U30 and ZW Series Data Loggers

Onset 3-Meter Tripod Kit

• 3-meter tripod (M-TPA)
• Grounding Kit (M-GKA)
• Guy Wire Kit (M-GWA)
• 1/2" Stake Kit (M-SKA) for guy wires and tripod
• Mast Level (M-MLA)

Onset 2-Meter Tripod Kit

• 2-meter tripod (M-TPB)
• Grounding Kit (M-GKA)
• Guy Wire Kit (M-GWA)
• 1/2" Stake Kit (M-SKA) for Guy Wires and Tripod
• Mast Level (M-MLA)

Onset Mast Mounting Kit

• Used to Mount Micro Station to a 4.1 cm (1 5/8") Diameter Mast
• Dimensions: 19 cm x 9 cm x 8 cm (7.5" x 3.5" x 3.0"
• Weight: 0.45 kg (1.0 lb)
• Compatible with Onset HOBO Micro Station Data Logger

Includes Mounting Plate, (2) U-Bolt Assembly and (4) 6x38 Screws

Onset Mast Level

• (2) Levels Mounted at 90" Show When Mast is Vertical
• Material: Plastic
• Weight: 125 grams (4.4 oz)

Onset 3 Meter Mast

• 3 piece mast constructed of 4.1 cm (1 5/8") welded steel tubing with galvanized plating.
• Mounting holes pre-drilled to accommodate cross arm attachment
• Hardware: Zinc Plated Steel
• Height: 3.45 meters (136") assembled
• Weight: 3.8 kg (8.3 lbs)

Includes (2) Clamps for Locking Mast Pieces Together

Onset 1.5 Meter Mast

• 3 piece mast constructed of 4.1 cm (1 5/8") welded steel tubing with galvanized plating.
• Mounting holes pre-drilled to accommodate cross arm attachment
• Hardware: Zinc Plated Steel
• Height: 1.475 meters (58") assembled
• Weight: 2.0 kg (4.5 lbs)

Onset 3m Tripod Tower with Mast

• Specifically Designed for Use with Moderately Sloping Terrain
• Independently adjustable legs facilitate installation on moderately uneven ground
• Survival in winds up to 120 mph

Includes Mounting Holes

Onset 2m Tripod Tower with Mast

• Designed to Mount Data Loggers and/or Sensors in Weather Station Application
• Survival in winds up to 120 mph
• Note: Not Adjustable for Sloping Surfaces

Includes Mounting Holes

Onset Grounding Kit

• For use in exposed areas, recommended for long term installations
• Wire Length: 1.82 Meters (6 ft) Grounding Wire
• Wire Type: 6 AWG stranded Bare Copper
• Grounding Rod: 1.2 m x 1.6 cm (4' x 5/8") copper clad steel
• Mounting: 1 5/8" Zinc Plated Steel mast cable clamp, 5/8" brass rod cable clamp
• Weight: 3.0 kg (6.7 lbs)

Onset Guy Wire Kit

• Reduces tower vibration in windy locations. Recommended when mounting rain gauge on tripod and for long term installations.
• Cable Length: 12.7 meters (50 feet)
• Cable Type: Plastic Coated, Multi-Strand Galvanized Steel Wire OD 3.5mm (0.14")
• Mounting: Pole Diameter of 3.8 to 6.4 cm (1.5"' to 2.5") in Diameter
• Weight: 1.4 kg (3.1 lbs)

Compatible with Onset's 3 Meter and 2 Meter Tripods (using with 2 Meter Tripod Requires 0.5" Stake Kit)

Onset 1/2" Large Stake Kit

• Use with Onset's 3 meter Tripod or Guy Wire Kit, particularly in windy or long-term deployment conditions
• Dimensions: 1.3 x 61 cm (1/2" x 24")
• Material: Steel Rebar with 44 mm (1 3/4") head and 6.4 mm (1/4") mounting hole
• Weight: 2.0 kg (4.3 lbs)

Onset 1/4" Small Stake Kit

• Use to Secure the Feet of Onset's 2 Meter Tripod
• Dimensions: 0.64 x 38 cm (1/4" x 15")
• Material: Steel
• Weight: 0.3 kg (0.7 lbs)